.:HSTuners::

03-06-2003, 03:55 PM

how about this, with a stand-alone. you can adjust every aspect of the timing and air fuel delivery so you can adjust it so that it will pass emmisions and then when you get home, jsut reprogram it for performance. once you do it once or twice, it should only take about 10 minutes or less as long as you save the maps for both settings-obd2 and performance. the down side to theis, seeing as you are in cali,- i believe that at the emmisions center they look at the obd2 readiness tests. which means if the stand-alone does not support them, you cant pass. also if you clear the codes and the light is out but the fault is still there- they can see it anyway.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-06-2003, 03:55 PM	#1
chase Posts: n/a	how about this, with a stand-alone. you can adjust every aspect of the timing and air fuel delivery so you can adjust it so that it will pass emmisions and then when you get home, jsut reprogram it for performance. once you do it once or twice, it should only take about 10 minutes or less as long as you save the maps for both settings-obd2 and performance. the down side to theis, seeing as you are in cali,- i believe that at the emmisions center they look at the obd2 readiness tests. which means if the stand-alone does not support them, you cant pass. also if you clear the codes and the light is out but the fault is still there- they can see it anyway.