.:HSTuners::

2ndGenTeg · 01-28-2003, 05:45 PM

You'e on the right track- the "10/10" motor will be more prone to detonation, because of the amount of pressure the contents of the cylinder are under. Think static CR, but to say the cylinder is under 240 psi is inaccurate.

Absolutely- there are a ton of variables- but that's part of the tuning- controlling all the variables you can to get the most power out of the setup, and (once again), maintain the integrity of the motor.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-28-2003, 05:45 PM	#6
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 45 Posts: 830	You'e on the right track- the "10/10" motor will be more prone to detonation, because of the amount of pressure the contents of the cylinder are under. Think static CR, but to say the cylinder is under 240 psi is inaccurate. Absolutely- there are a ton of variables- but that's part of the tuning- controlling all the variables you can to get the most power out of the setup, and (once again), maintain the integrity of the motor.