.:HSTuners::

shadowracer · 01-25-2003, 07:53 PM

Ignition is a big part of the combustion process, in fact it is 1/3 of it. The iridiums are good plugs but expensive at around $15.00 a plug they work great especially with turbo and NOS applications due to the higher cylinder temps. I stand by NGK plugs and any MSD ignition for the money you can't beat em. NGK works great with NOS I knew this first hand, just get a 1 temp range colder and tighten up the gap a lil. As for the plug wires MSD have only 50 ohms resistance per foot. I just recently picked up a set of NGK blue wires and they work pretty well and were about $30.00 less then the MSD's but if I would do it again I would go back to the MSD's

01-25-2003, 07:53 PM	#12
shadowracer 1st Gear Join Date: Dec 2002 Location: South side chi-town illinois Posts: 37	Ignition is a big part of the combustion process, in fact it is 1/3 of it. The iridiums are good plugs but expensive at around $15.00 a plug they work great especially with turbo and NOS applications due to the higher cylinder temps. I stand by NGK plugs and any MSD ignition for the money you can't beat em. NGK works great with NOS I knew this first hand, just get a 1 temp range colder and tighten up the gap a lil. As for the plug wires MSD have only 50 ohms resistance per foot. I just recently picked up a set of NGK blue wires and they work pretty well and were about $30.00 less then the MSD's but if I would do it again I would go back to the MSD's __________________ D-series, my weapon of choice!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode