.:HSTuners::

krz2fer · 01-20-2003, 06:55 AM

The harness that comes out of the trunk from the car is a 4 wire harness, which supports the brake light and the reverse light. The actual stock housing is a large plastic piece with both bulbs in it and doesn't fit into these aftermarket lights.

The joining harness that came with the altezzas is only a 2-wire harness that supports the reverse light. In other words... the 4-wire car connector connects with this new one that only has 2 wires... so basically 2 wires (for the brake) are doing nothing for the 2 trunk pieces of my lights.

So... I want to know where to get a 4-wire harness that supports 2 bulbs.

01-20-2003, 06:55 AM	#5
krz2fer 2nd Gear Join Date: Apr 2002 Location: VA Posts: 122	The harness that comes out of the trunk from the car is a 4 wire harness, which supports the brake light and the reverse light. The actual stock housing is a large plastic piece with both bulbs in it and doesn't fit into these aftermarket lights. The joining harness that came with the altezzas is only a 2-wire harness that supports the reverse light. In other words... the 4-wire car connector connects with this new one that only has 2 wires... so basically 2 wires (for the brake) are doing nothing for the 2 trunk pieces of my lights. So... I want to know where to get a 4-wire harness that supports 2 bulbs. __________________ krz2fer --- "Aim for the sky, straight into the sun."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode