.:HSTuners::

*pdiggitydogg* · 12-16-2002, 10:46 AM

one your stock radio there are 2 connectors. 1 has all those colored wires that i listed in the other post and is also smaller than the other one (i think it is to the right of the main radio connector if you are looking at the radio from the top).

The gray wire in that smaller set is connected to the horn. All you have to do is cut it and splice it 4 times and run it to the lights of your choice. This way the signal only goes to the lights and not the horn.

You can also do it by holding OPTION until the red light flashes on your remote, release and then press the lock button. But this will only lock the doors and you have to listen for them to latch (or check the handle) and thats a pain in the ass.

Hope this helps

If you still dont get it just IM me on AIM (PDiggityDogg) or post another thing here and I'll see what I can do to help you more.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-16-2002, 10:46 AM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	one your stock radio there are 2 connectors. 1 has all those colored wires that i listed in the other post and is also smaller than the other one (i think it is to the right of the main radio connector if you are looking at the radio from the top). The gray wire in that smaller set is connected to the horn. All you have to do is cut it and splice it 4 times and run it to the lights of your choice. This way the signal only goes to the lights and not the horn. You can also do it by holding OPTION until the red light flashes on your remote, release and then press the lock button. But this will only lock the doors and you have to listen for them to latch (or check the handle) and thats a pain in the ass. Hope this helps If you still dont get it just IM me on AIM (PDiggityDogg) or post another thing here and I'll see what I can do to help you more.