.:HSTuners::

94_AcCoRd_EX · 11-21-2002, 05:51 PM

Quote:

Originally posted by Kyle
I've got a pretty shitty 733 mhz compaq presario...
it costed like 400 brand new..so i'm not complaining...
It's 5:00 now...and it's been on since like 7:00 yesterday...
only 50 frames done...is that bad?

Neh, you'll be fine

94_AcCoRd_EX · 12-09-2002, 04:21 PM

Moved to the geek section...

Anyone else want to fold?

nonovurbizniz · 12-09-2002, 07:54 PM

just downloaded it and am running it.

my 1800 is maxed out we'll see what it'll do.

I leave this thing on ALL the time.

Oh and I joined team 32

ebpda9 · 12-09-2002, 10:26 PM

i think i got my ears caught in the setup

94_AcCoRd_EX · 12-09-2002, 10:37 PM

Quote:

Originally posted by nonovurbizniz
just downloaded it and am running it.

my 1800 is maxed out we'll see what it'll do.

I leave this thing on ALL the time.

Oh and I joined team 32

Sweet! Glad to have you join.

94_AcCoRd_EX · 12-09-2002, 10:37 PM

Quote:

Originally posted by hondaman-iac
i think i got my ears caught in the setup

huh?

ebpda9 · 12-09-2002, 10:46 PM

i can't setup the damn thing

94_AcCoRd_EX · 12-09-2002, 11:01 PM

Quote:

Originally posted by hondaman-iac
i can't setup the damn thing

Did you follow the instrucions I gave?

*Addict* · 12-10-2002, 07:40 AM

Quote:

Originally posted by hondaman-iac
i can't setup the damn thing

Did you get the console or GUI version?

ebpda9 · 12-10-2002, 08:33 AM

GUI version. and it just locks in there.

*Addict* · 12-10-2002, 08:39 AM

Have you even gotten to the point of entering your username & team name?
Is it locking up after you attempt to start it for the first time?

ebpda9 · 12-10-2002, 08:42 AM

Quote:

Originally posted by Civic_Addict
Have you even gotten to the point of entering your username & team name?
Is it locking up after you attempt to start it for the first time?

i start it then it just locks up. i gotta use the task manager to close it down.

*Addict* · 12-10-2002, 08:49 AM

Quote:

Originally posted by hondaman-iac
i start it then it just locks up. i gotta use the task manager to close it down.

What did you set the core priority to? It should be set to low. SOmetimes it will try to default to idle/normal.

nonovurbizniz · 12-10-2002, 10:08 AM

when i woke up this morning it was on 71% but then 2 hrs later it was at 91% so I don't know if it completed one over night and started a new one or if my computer went into hybernation overnight (i have it set so it never sleeps).

Is there a progress tracker or anything (I haven't looked at it at all yet)

I used to do seti@home (you know the search for extra-terestial Intelligence)

But that seems a little less helpfull to mankind.

*Addict* · 12-10-2002, 10:33 AM

Quote:

Originally posted by nonovurbizniz
when i woke up this morning it was on 71% but then 2 hrs later it was at 91% so I don't know if it completed one over night and started a new one or if my computer went into hybernation overnight (i have it set so it never sleeps).

Is there a progress tracker or anything (I haven't looked at it at all yet)

I used to do seti@home (you know the search for extra-terestial Intelligence)

But that seems a little less helpfull to mankind.

Its never really at a constant rate. Did you get the GUI version or console?
http://folding.stanford.edu <- check your stats
www.em-dc.com <- Electron Microscope It monitors the console version and the GUI version.

94_AcCoRd_EX · 12-10-2002, 11:12 AM

Quote:

Originally posted by nonovurbizniz
when i woke up this morning it was on 71% but then 2 hrs later it was at 91% so I don't know if it completed one over night and started a new one or if my computer went into hybernation overnight (i have it set so it never sleeps).

Is there a progress tracker or anything (I haven't looked at it at all yet)

I used to do seti@home (you know the search for extra-terestial Intelligence)

But that seems a little less helpfull to mankind.

For the progress tracker, you can just open the DOS window that's folding. It will tell you the % done. Or, I prefer to go to www.em-dc.com and download EMIII to track.

94_AcCoRd_EX · 12-10-2002, 11:12 AM

Quote:

Originally posted by hondaman-iac
i start it then it just locks up. i gotta use the task manager to close it down.

Get the text console and EMIII like I recommended. Less compatability issues.

nonovurbizniz · 12-10-2002, 11:15 AM

I dl'd the console version....

I was actually concerned with how many chunks It had completed not the percentage of the chunk that's done.

IE.. in seti@home it keeps track of how many chunks of data you've crunched. (i was up to 88 when i stopped).

*Addict* · 12-10-2002, 12:22 PM

Quote:

Originally posted by nonovurbizniz
I dl'd the console version....

I was actually concerned with how many chunks It had completed not the percentage of the chunk that's done.

IE.. in seti@home it keeps track of how many chunks of data you've crunched. (i was up to 88 when i stopped).

The http://folding.stanford.edu site will tell you. Just search for your user name.

94_AcCoRd_EX · 12-10-2002, 04:19 PM

Quote:

Originally posted by nonovurbizniz
I dl'd the console version....

I was actually concerned with how many chunks It had completed not the percentage of the chunk that's done.

IE.. in seti@home it keeps track of how many chunks of data you've crunched. (i was up to 88 when i stopped).

You can check the folding site, search for a program called StatsGrabber, us EMIII, or many other fold monitors to check your points.

Each protein is worth different points, depending on complexity, etc. Find that info here: http://folding.stanford.edu/psummary.html

ebpda9 · 12-10-2002, 05:11 PM

hmm so after i installed it it doesn't tell me that it does anything. i have 2 console windows running and nothing chages there

94_AcCoRd_EX · 12-10-2002, 06:01 PM

Quote:

Originally posted by hondaman-iac
hmm so after i installed it it doesn't tell me that it does anything. i have 2 console windows running and nothing chages there

Just run 1 console.

Check to make sure 100% of CPU is being used.

Let it sit. Minimize it and check it again later. It will say it completed some frames. Best thing is to go to www.em-dc.com, download EMIII and let it hide the window and monitor your progress for you.

ebpda9 · 12-10-2002, 06:17 PM

that's the program that locks

how am i supposed to set it up ?

94_AcCoRd_EX · 12-10-2002, 06:24 PM

Quote:

Originally posted by hondaman-iac
that's the program that locks

how am i supposed to set it up ?

Try running EMIII with a -clear switch. That resets everything. It should work then. The creator also said that its possible for it to freeze for around 30sec and then be fine again if there are bad settings.

ShagginJet · 12-10-2002, 06:39 PM

So i saw it was for a good cause, bam, hopped on it... so now it's going.. I'll set my home machine up later, nd maybe others down the road.

Doesn't seem to be doing anything though.

ebpda9 · 12-10-2002, 06:43 PM

Quote:

Originally posted by 94_AcCoRd_EX
Try running EMIII with a -clear switch. That resets everything. It should work then. The creator also said that its possible for it to freeze for around 30sec and then be fine again if there are bad settings.

can you check the stats for me ? i'm hondaman008 and i did like 16 frames so far. i'm just curious

12-10-2002, 07:14 PM

Sounds fun, I think i'll set it up when I get home

94_AcCoRd_EX · 12-10-2002, 07:16 PM

Quote:

Originally posted by ShagginJet
So i saw it was for a good cause, bam, hopped on it... so now it's going.. I'll set my home machine up later, nd maybe others down the road.

Doesn't seem to be doing anything though.

Very cool, thanks for joining.

It takes awhile to do anything, and a work unit can take over 24hrs to complete on a slower machine. Check your CPU usage. If the core is using 95+%, you're set!

94_AcCoRd_EX · 12-10-2002, 07:17 PM

Quote:

Originally posted by hondaman-iac
can you check the stats for me ? i'm hondaman008 and i did like 16 frames so far. i'm just curious

Stats only reflect completed work units. You'll have to finish one first, and it takes a little bit for them to get posted.

nonovurbizniz · 12-10-2002, 08:54 PM

So 25 hrs later on an athlon 1800+ I have folded one work unit and am 63 percent done with the next.

Look at all that wonderful cpu power that was going to waste.

ebpda9 · 12-10-2002, 09:03 PM

does anyone know how to bring the program from the stealt mode ?

*Addict* · 12-10-2002, 09:26 PM

Quote:

Originally posted by nonovurbizniz
So 25 hrs later on an athlon 1800+ I have folded one work unit and am 63 percent done with the next.

Look at all that wonderful cpu power that was going to waste.

Yep. It takes alot to do those sims.

94_AcCoRd_EX · 12-10-2002, 09:29 PM

Quote:

Originally posted by hondaman-iac
does anyone know how to bring the program from the stealt mode ?

Everything you want to know about EMIII:
http://home.attbi.com/~wxdude1/emsite/help/index.html

To answer your question, press and hold the scroll lock key for as long as 30 seconds until the program pops back up.

ShagginJet · 12-11-2002, 02:33 AM

Who's running EM...?

Is it worth setting up?

94_AcCoRd_EX · 12-11-2002, 03:15 AM

Quote:

Originally posted by ShagginJet
Who's running EM...?

Is it worth setting up?

I am. Its easy to setup and well worth it. It will also monitor multiple computers across a network.

*Addict* · 12-11-2002, 10:48 AM

Quote:

Originally posted by ShagginJet
Who's running EM...?

Is it worth setting up?

Yeah it is. Like 94_AcCoRd_EX said, its nice to monitor the computers on the network. That & it hides the console version. Definately a plus.

ShagginJet · 12-11-2002, 01:50 PM

But does the EM use up and clock %, cause the console version of F@H uses up 20% here and there?

94_AcCoRd_EX · 12-11-2002, 02:02 PM

Quote:

Originally posted by ShagginJet
But does the EM use up and clock %, cause the console version of F@H uses up 20% here and there?

If you set it up correctly (priority: idle, cpu usage: 100%), the core won't use anything when you're using the computer and it will use 98-99% when you're not.

EMIII uses very little cpu cycles and its well worth it for me to monitor the 3 folding machines I have on my network.

ShagginJet · 12-12-2002, 01:02 AM

Sw33t... The protien i'm working on will be complete on June 28th of 2003... LMFAO!!

94_AcCoRd_EX · 12-12-2002, 01:33 AM

Quote:

Originally posted by ShagginJet
Sw33t... The protien i'm working on will be complete on June 28th of 2003... LMFAO!!

Huh? Maybe if you're on a 286CPU. The proteins have deadlines, listed in the link I gave Stefan.

What speed CPU do you have?

12-09-2002, 04:21 PM	#42
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	Moved to the geek section... Anyone else want to fold? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

12-09-2002, 07:54 PM	#43
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	just downloaded it and am running it. my 1800 is maxed out we'll see what it'll do. I leave this thing on ALL the time. Oh and I joined team 32 __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-09-2002, 10:26 PM	#44
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i think i got my ears caught in the setup __________________

12-09-2002, 10:46 PM	#47
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i can't setup the damn thing __________________

12-10-2002, 08:33 AM	#50
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	GUI version. and it just locks in there. __________________

12-10-2002, 10:08 AM	#54
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	when i woke up this morning it was on 71% but then 2 hrs later it was at 91% so I don't know if it completed one over night and started a new one or if my computer went into hybernation overnight (i have it set so it never sleeps). Is there a progress tracker or anything (I haven't looked at it at all yet) I used to do seti@home (you know the search for extra-terestial Intelligence) But that seems a little less helpfull to mankind. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-10-2002, 11:15 AM	#58
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	I dl'd the console version.... I was actually concerned with how many chunks It had completed not the percentage of the chunk that's done. IE.. in seti@home it keeps track of how many chunks of data you've crunched. (i was up to 88 when i stopped). __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-10-2002, 05:11 PM	#61
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	hmm so after i installed it it doesn't tell me that it does anything. i have 2 console windows running and nothing chages there __________________

12-10-2002, 06:17 PM	#63
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	that's the program that locks how am i supposed to set it up ? __________________

12-10-2002, 06:39 PM	#65
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	So i saw it was for a good cause, bam, hopped on it... so now it's going.. I'll set my home machine up later, nd maybe others down the road. Doesn't seem to be doing anything though. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

12-10-2002, 07:14 PM	#67
Quevv Posts: n/a	Sounds fun, I think i'll set it up when I get home

12-10-2002, 08:54 PM	#70
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	So 25 hrs later on an athlon 1800+ I have folded one work unit and am 63 percent done with the next. Look at all that wonderful cpu power that was going to waste. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

12-10-2002, 09:03 PM	#71
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	does anyone know how to bring the program from the stealt mode ? __________________

12-11-2002, 02:33 AM	#74
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	Who's running EM...? Is it worth setting up? __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

12-11-2002, 01:50 PM	#77
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	But does the EM use up and clock %, cause the console version of F@H uses up 20% here and there? __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

12-12-2002, 01:02 AM	#79
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	Sw33t... The protien i'm working on will be complete on June 28th of 2003... LMFAO!! __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode