.:HSTuners::

12-08-2002, 01:50 PM

You can not get new screens unless you have some injectors (new or used, they don't come sepratly)
Just try to get as much out as you can,tapping them on the ground or something and use something light in color so you can see what comes out. You will have to look at the screen when its all cleared out and make sure it isn't broken. If it is broken then you will need new/used injectors. The residue in the pressure regulator has me worried as well.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-08-2002, 01:50 PM	#11
Greasemonkey75 Posts: n/a	You can not get new screens unless you have some injectors (new or used, they don't come sepratly) Just try to get as much out as you can,tapping them on the ground or something and use something light in color so you can see what comes out. You will have to look at the screen when its all cleared out and make sure it isn't broken. If it is broken then you will need new/used injectors. The residue in the pressure regulator has me worried as well.