.:HSTuners::

thermal · 11-28-2002, 10:47 PM

i'm still in progress of putting mine together. i have all the parts but have no time to install it. i really have to hurry up before it gets cold outside. anyway, it should be safe to start with a -35% trim. i have heard of others running around -40%. increase fuel points on the higher RPM's to ensure ample fuel is achieved. if want to see the diagram/schematic for the resistor box to DSM 450cc injectors, check out my website under the "modifications2". it'll explain most of the basic stuff.

11-28-2002, 10:47 PM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	i'm still in progress of putting mine together. i have all the parts but have no time to install it. i really have to hurry up before it gets cold outside. anyway, it should be safe to start with a -35% trim. i have heard of others running around -40%. increase fuel points on the higher RPM's to ensure ample fuel is achieved. if want to see the diagram/schematic for the resistor box to DSM 450cc injectors, check out my website under the "modifications2". it'll explain most of the basic stuff. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode