| .:HSTuners::::Hondas Wanted:: | 
|  11-16-2002, 01:43 PM | #1 | 
| 
					Posts: n/a
				 | 
				
				top rated amps
			 What are some of the top rated, high quality amps?  Specifically, I need an amp that will put out 400rms at good quality sound. | 
|   | 
|  11-17-2002, 02:15 AM | #2 | 
| 
					Posts: n/a
				 | what price range? | 
|   | 
|  11-17-2002, 02:28 AM | #3 | 
| 
					Posts: n/a
				 | also at what impedance? | 
|   | 
|  11-17-2002, 02:31 AM | #4 | 
| 
					Posts: n/a
				 | and!!! how many channels   | 
|   | 
|  11-17-2002, 03:36 AM | #5 | 
| 
					Posts: n/a
				 | I would like one under 300, 4 ohm and mono or 2 channel | 
|   | 
|  11-18-2002, 07:45 PM | #6 | 
| 
					Posts: n/a
				 | I always say get a JL audio one. there good quality amps...either that, or MTX, they're good also | 
|   | 
|  11-18-2002, 08:03 PM | #7 | 
| Thought Police Join Date: Aug 2001 Location: orlando florida Age: 41 
					Posts: 9,662
				 | ive never had a problem with rockford amps 
				__________________ Black Vtec Prelude-h22a power'd  Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold. | 
|   |   | 
|  11-22-2002, 04:16 PM | #8 | 
| 
					Posts: n/a
				 | I would recommend Rockford as well...they are powerful and you can't kill em. | 
|   | 
|  11-22-2002, 06:06 PM | #9 | 
| 
					Posts: n/a
				 | under $300 makes it tough.   all of these have a pretty high MSRP but you should be able to pick them up for right about $300 if you look around Orion XTREME 375^2 is 375 x 1 @ 4ohm underrated Harrison Labs Audio Engine AE-400.4 is 400 x 1 @ 4 ohms WAY underrated fosgate Punch 400s is 100 x 2 @ 4 or 400 x 1 @ 4 and not my best pick, I'm not a huge fan of fosgate I've seen refurbed Phoenix Gold T500s for under $300 those are 500 x 1 @ 4 ohms great amp $300 is quite a bit limiting, but I'd look around on ebay, thezeb and sounddomain and see if you can find anything you like. I just picked up a brand new last gen kicker ZR-1000 on ebay for $419  so deals are out there  You could have a few more options with a mono block amp if you had a 2 ohm load. | 
|   | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |