.:HSTuners::

04-27-2002, 08:58 PM

hey guys... i need some help on picking out my springs and shocks...

the car is a 93 civic 4dr with a b18c1... i want about a 2 inch drop with a comfortable ride... i don't really want to adjust my ride height so coilovers aren't really worth the extra expense...

thanks,

jovial

ebpda9 · 04-29-2002, 07:20 PM

i don't know about good springs that will drop 2" and still maintaining a comfy ride. i would definitelly look into some kony yellows and either eibach sportline or some neuspeed springs. i think you don't have too much of extra weight from the b18 do u ?

04-29-2002, 10:52 PM

good points...

i'll look into the koni's and neuspeeds... maybe a 1 inch drop would be alright... do you think i'll need a camber kit also?

ebpda9 · 04-30-2002, 07:38 AM

usually you don't need a chamber kit for drops up to 1.5, but you are going to find out when you take the car for an alignament

Racing Rice · 04-30-2002, 08:05 AM

Nuespeed, H&R, Eibach.... there are many companies that make decent springs. 2 inches is pretty low, youll may even run into some problems with wheel rubbing, especially if your running larger wheels with incorrect offset and tire size.

As for a camber kit, cars react to lowering differently, one could be lowered 1 inch and need a camber kit, while the other is lowered 2 inches and doesnt need a camber kit. My suggestion would be, after you lower it take it to get it aligned, if they say you need a camber kit then you should probably by one, or buy a set that way if you need it its there. If you dont then sell it.

04-27-2002, 08:58 PM	#1
jovial Posts: n/a	suspension setup for hybrid hey guys... i need some help on picking out my springs and shocks... the car is a 93 civic 4dr with a b18c1... i want about a 2 inch drop with a comfortable ride... i don't really want to adjust my ride height so coilovers aren't really worth the extra expense... thanks, jovial

04-29-2002, 07:20 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i don't know about good springs that will drop 2" and still maintaining a comfy ride. i would definitelly look into some kony yellows and either eibach sportline or some neuspeed springs. i think you don't have too much of extra weight from the b18 do u ? __________________

04-30-2002, 07:38 AM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	usually you don't need a chamber kit for drops up to 1.5, but you are going to find out when you take the car for an alignament __________________

04-30-2002, 08:05 AM	#5
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 46 Posts: 7,985	Nuespeed, H&R, Eibach.... there are many companies that make decent springs. 2 inches is pretty low, youll may even run into some problems with wheel rubbing, especially if your running larger wheels with incorrect offset and tire size. As for a camber kit, cars react to lowering differently, one could be lowered 1 inch and need a camber kit, while the other is lowered 2 inches and doesnt need a camber kit. My suggestion would be, after you lower it take it to get it aligned, if they say you need a camber kit then you should probably by one, or buy a set that way if you need it its there. If you dont then sell it. __________________ Racing Rice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-29-2002, 10:52 PM	#3
jovial Posts: n/a	good points... i'll look into the koni's and neuspeeds... maybe a 1 inch drop would be alright... do you think i'll need a camber kit also?