.:HSTuners::::Hondas Wanted:: |
08-10-2003, 05:49 PM
|
#1 |
|
Posts: n/a
|
Headlight Strobe Install question
i just bought headlight strobes for my civic, i got a 98 LX where the hell could i drill a hole to place the strobe in the headlights?
|
|
|
08-10-2003, 09:50 PM
|
#2 |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 39
Posts: 1,137
|
whereever you want...
i drilled mine on the inside "side" of the headlights...right between the first and second reflector.. i suggest you open up your headlights and drill from the inside, that way you won't have little plastic fuzz on the inside of your headlights AND you won't risk damaging the reflector... if you want i can take a picture to show you
__________________
RICE....is good |
|
|
|
08-10-2003, 11:53 PM
|
#3 |
|
Posts: n/a
|
uh...what is a headlight strobe?
|
|
|
|
08-11-2003, 01:19 AM
|
#4 |
|
Posts: n/a
|
i *think* its just a strobe light that gets mounted inside the headlight housing. Just be careful to seal up the hole well, dont want any fogging....
|
|
|
|
08-11-2003, 11:10 AM
|
#5 |
|
Posts: n/a
|
yea.. use the clear silicone sealant, and LOTS of it. this will ensure proper seal :PP
|
|
|
|
08-11-2003, 11:11 PM
|
#6 |
|
Posts: n/a
|
tell me how the heck to take out the headlight, i took out the top two bolts and it wouldnt budge, and a picture would help thanks
|
|
|
|
08-12-2003, 01:11 AM
|
#7 |
|
Posts: n/a
|
for the 98 LX im about 90% sure the bumper has to come off before the headlights will come out.
|
|
|
|
08-12-2003, 09:34 PM
|
#8 |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 39
Posts: 1,137
|
there is another bolt on the outer side of the headlight (turn signal side). you'll have to pull part of the fenderwell plastic to get to it. i believe there's only 3 bolts per headlight, but i could be wrong...i'll take the picture tomorrow for you
and i didn't have to take the front bumper out..
__________________
RICE....is good |
|
|
|
|
08-13-2003, 11:34 AM
|
#9 |
|
Posts: n/a
|
i was wrong then =P isn't a first lol
|
|
|
|
08-13-2003, 11:54 AM
|
#10 |
|
Posts: n/a
|
You're gonna have to take the bumper off, there's a bolt on the outside and one in the front.
|
|
|
|
08-13-2003, 09:40 PM
|
#11 |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 39
Posts: 1,137
|
i didn't have to...
__________________
RICE....is good |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
