HSTuners - View Single Post - 92-95 civic rear disc conversion.....

*pdiggitydogg* · 03-10-2004, 09:30 PM

they are all the same arms (all eg/ek/dc)
you can just swap the hubs over but you need a special driver to insert onto the back of the hub and an impact to remove it.

Physically, and in terms of finding the parts it is a whole lot easier to just buy the arms that already have rear disc (either off a sedan ex, si, or 94+ integra) and swap them on.

There's also a how-to thread in the DIY area of hst that has this info and how to actually do it.

03-10-2004, 09:30 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	they are all the same arms (all eg/ek/dc) you can just swap the hubs over but you need a special driver to insert onto the back of the hub and an impact to remove it. Physically, and in terms of finding the parts it is a whole lot easier to just buy the arms that already have rear disc (either off a sedan ex, si, or 94+ integra) and swap them on. There's also a how-to thread in the DIY area of hst that has this info and how to actually do it.