HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Shifting Gears - Off Topic Discussions (http://www.hstuners.com/forums/forumdisplay.php?f=9)
-   -   What do you guys think about the D15B (3-stage VTec) (http://www.hstuners.com/forums/showthread.php?t=20175)

GeneralDzur 03-09-2004 11:56 AM

What do you guys think about the D15B (3-stage VTec)
 
I was reading up on the D15B engine, and it's supposed to (basically) combine the economy of a SOHC non-VTec and the smooth power band of a SOHC VTec. It's 1.5L and rated at 128HP. Would any of you use it in a car? I mean, it sounds cool, but it's really just an economy engine.

- Dzur

IALuder 03-09-2004 01:04 PM

i have posted a thread on this before in the civic dig it up.

personally i would. why becuase its got a 7:1 compression ratio. you could boost the hell out that motor.

MAXed Out 03-09-2004 03:13 PM

I don't think i would use it in any way.

drdingo21 03-10-2004 08:39 PM

There are a more than a few boosted D seriers engines. With minor upgrades wht will hanlde more than enough boost to keep your car fast.

ChrisCantSkate 03-10-2004 10:15 PM

knee jerk reation is no, mainly because d15 and 128hp dosnt sound like something i wana start building off of.

AzCivic 03-10-2004 11:15 PM

Quote:

Originally posted by SFKing
its got a 7:1 compression ratio


i seriously doubt that

IALuder 03-10-2004 11:24 PM

i have a friend with one! go to www.iastreetracing.com and look for Judd. hes the one with it.

AzCivic 03-10-2004 11:33 PM

thats nice, you're still wrong.

KwikR6 03-11-2004 01:56 AM

Meh...I am a pretty big fan of the B series...I love them.
I wouldn't waste my time with a D
But that's me..and I know tons of people that love the D block..
What it comes down to here, is personal preference.

pdiggitydogg 03-11-2004 06:31 AM

yeah the d15b vtec has 9:6 compression

I say, its too expensive for a 1.5l w/ vtec
A d16z6 could be had for probably less $ and has more displacement. The only thing that the d15b has going for it is a stock lsd tranny...

ChrisCantSkate 03-11-2004 08:50 AM

9:6 compression or 9.6:1?

pdiggitydogg 03-11-2004 12:58 PM

961...I got lazy
(and clearly still am...no ':')

IALuder 03-11-2004 01:41 PM

^nice. i wouldnt pimp out a D series motor. but then agian i once was doing that myself.

think of this: you buy a civic and you put in headers exhuast intake air filter cams. the basic stuff. then you line your self up agianst stock B H or F series motor. the B and H will beat you stock. the F series will keep up with you. go ahead flame me if you disagree.

so imo i would swap out the D for a B series motor. then agian the trend now seems to be all about putting h22s in civics and accords. check out the civic forum here. theres 10-15 posts on the H series swap.

Shaved &/or Laid 03-11-2004 04:49 PM

<- and one user who wants to trade his B swap for an H swap

pdiggitydogg 03-11-2004 09:05 PM

its not really a new trend to put h's in civics...it just seems like thats whats going on here lately......

GeneralDzur 03-11-2004 09:20 PM

An H-swap? Don't you have to alter your engine bay for that?

- Dzur

pdiggitydogg 03-12-2004 12:43 AM

not really...just custom mounts mostly and then change the interior to use the cable linkage

AzCivic 03-12-2004 01:05 AM

Quote:

Originally posted by SFKing
^nice. i wouldnt pimp out a D series motor. but then agian i once was doing that myself.

think of this: you buy a civic and you put in headers exhuast intake air filter cams. the basic stuff. then you line your self up agianst stock B H or F series motor. the B and H will beat you stock. the F series will keep up with you. go ahead flame me if you disagree.

so imo i would swap out the D for a B series motor. then agian the trend now seems to be all about putting h22s in civics and accords. check out the civic forum here. theres 10-15 posts on the H series swap.



did you not learn a thing from the sticky in the civic forum??

AkimboStylee 03-12-2004 08:31 PM

Quote:

Originally posted by GeneralDzur
An H-swap? Don't you have to alter your engine bay for that?

- Dzur


just a lil bit... got the motor mounted in my frieds car, made the car look like 10 times smaller, waiting on turbo kit so the shop can install it... h22a with a turbo pushing 16 lbs of boost!!!! damn that is going to be fast. we also striped the interior, and made mounting holes for various gauges and also waiting on pair of carebou seats

IALuder 03-13-2004 12:12 AM

actually i never looked at that sticky. sorry.


All times are GMT -5. The time now is 11:32 PM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com