.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Honda / Acura Cars > Accord
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 03-07-2004, 12:37 PM   #1
F22B2
 
Posts: n/a
Weapon R Throttle Rotor Installation

They say it was an easy installation (about 30 mins)..but I dont have any mechanical skill and I dont want to mess things up so can anyone help me out.

#1. Remove throttle cable from OEM rotor.
#2. Unbolt throttle rotor nut from OEM rotor.
#3. place new throttle rotor on toop of the OEM rotor.
#4. bolt new throttle rotor down with rotor nut.
#5. re-install throttle cable onto new rotor.
#6. re-adjust the throttle cable tension
#7. physical & visual inspect accordingly. installation is compelted.

Can anyone give me a more in-depth instruction from this?
  Reply With Quote
Old 03-07-2004, 12:53 PM   #2
vtracer20
 
Posts: n/a
seems to me it's really easy...just follow the instructions
  Reply With Quote
Old 03-07-2004, 01:09 PM   #3
94_AcCoRd_EX
Insomniac Moderator
 
94_AcCoRd_EX's Avatar
 
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
Which part are you confused about?
__________________
1994 Accord EX coupe

--Need hosting for your pics on HST? PM me...--
94_AcCoRd_EX is offline   Reply With Quote
Old 03-07-2004, 04:23 PM   #4
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 37
Posts: 7,908
sounds easy as playing pocket pool.

i dont know what your confused on. but if you trust yourself take it somewhere and have them do it.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 03-07-2004, 04:24 PM   #5
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
sounds pretty straight forward to me
__________________


ebpda9 is offline   Reply With Quote
Old 03-07-2004, 05:46 PM   #6
F22B2
 
Posts: n/a
well..i dont even know where the OEM throttle rotor is located..lmao
  Reply With Quote
Old 03-07-2004, 08:10 PM   #7
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
lol, take it to a mechanic then.
__________________


ebpda9 is offline   Reply With Quote
Old 03-09-2004, 12:17 PM   #8
johnriley
2nd Gear
 
Join Date: Jun 2002
Location: Kansas City, Mo
Age: 44
Posts: 211
Haha, this only takes 2 minutes to install lol I'll take some pics and post up.
johnriley is offline   Reply With Quote
Old 03-09-2004, 12:27 PM   #9
johnriley
2nd Gear
 
Join Date: Jun 2002
Location: Kansas City, Mo
Age: 44
Posts: 211
Check out this thread

http://www.hstuners.com/forums/showt...threadid=17008
Attached Images
File Type: jpg weaponrrotor.jpg (23.3 KB, 37 views)
johnriley is offline   Reply With Quote
Old 03-09-2004, 07:29 PM   #10
vtracer20
 
Posts: n/a
i dont understand why would u replace it....more bling bling in teh engine bay or u think your gonna get some hp's out of it??
  Reply With Quote
Old 03-10-2004, 03:04 PM   #11
johnriley
2nd Gear
 
Join Date: Jun 2002
Location: Kansas City, Mo
Age: 44
Posts: 211
There is no hp gain from this mod all it does is speed up acceleration by tightening the throttle cable. Decent mod IMO
johnriley is offline   Reply With Quote
Old 03-10-2004, 03:23 PM   #12
F22B2
 
Posts: n/a
well..got my WR rotor installed 2 days ago...better throttle respond..but the gas pedal is stiff like hell...i could only push it like for an inch..after that..its a pain to push any farther..therefore I can't go any faster if i cant push the gas pedal..i like the stock throttle rotor better...i could really floor the gas pedal on the stock rotor.
  Reply With Quote
Old 03-10-2004, 06:45 PM   #13
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
loosen up the cable a bit
__________________


ebpda9 is offline   Reply With Quote
Old 03-10-2004, 07:17 PM   #14
F22B2
 
Posts: n/a
i did...and actually its worst
  Reply With Quote
Old 03-10-2004, 07:24 PM   #15
94_AcCoRd_EX
Insomniac Moderator
 
94_AcCoRd_EX's Avatar
 
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
Quote:
Originally posted by F22B2
i did...and actually its worst


Are you positive you installed it correctly? You loosen the throttle cable and it becomes harder to push the pedal?
__________________
1994 Accord EX coupe

--Need hosting for your pics on HST? PM me...--
94_AcCoRd_EX is offline   Reply With Quote
Old 03-10-2004, 07:34 PM   #16
F22B2
 
Posts: n/a
no..it got softer...but again..i can't floor the gas pedal...and my top speed was like 80
  Reply With Quote
Old 03-11-2004, 11:01 AM   #17
johnriley
2nd Gear
 
Join Date: Jun 2002
Location: Kansas City, Mo
Age: 44
Posts: 211
My gas pedal is a little tight but I can push it to the floor and go past 80 no problem you must not have it installed correctly. Can you smoke the tires twice as good now?
johnriley is offline   Reply With Quote
Old 03-11-2004, 03:41 PM   #18
F22B2
 
Posts: n/a
I was checking out the WR throttle rotor and comparing it to the OEM one..I found out that it was harder for me to press down on the WR rotor (thus..making it harder to push the pedal...it might be because i'd overtighten the nut of the rotor)...I test out the OEM rotor..and it wasnt hard at all. If you had this mod installed..did you take out that round-flat washer or did you leave it on and installed the WR rotor on top of it?
  Reply With Quote
Old 03-15-2004, 08:05 AM   #19
johnriley
2nd Gear
 
Join Date: Jun 2002
Location: Kansas City, Mo
Age: 44
Posts: 211
Yes, you install it on top of it. It just slips right over it and then tighten the nut.
johnriley is offline   Reply With Quote
Old 05-15-2020, 07:23 AM   #20
fertooos
Registered User
 
Join Date: Mar 2020
Posts: 68
I am very surprised by this information actually. All my life I have been thinking that you cannot post any guns by regular post. Is that legally allowed at all? I will check it in my place, I am from https://worldpostalcode.com/united-s...ington/seattle. But I think you should be physically available during such a purchase. Am I right or not? Thanks for the explanation.
fertooos is offline   Reply With Quote
Old 05-18-2020, 05:05 AM   #21
shamsmehra90
Registered User
 
Join Date: May 2020
Posts: 1
Hi,
The weapon R piece brings the cable out about half an inch, enough to give it an angle to rub against the rotor.

Last edited by shamsmehra90 : 06-13-2020 at 08:58 AM.
shamsmehra90 is offline   Reply With Quote
Old 09-29-2020, 02:04 PM   #22
rajubhaiya
Registered User
 
Join Date: Sep 2020
Posts: 2
i dont know what your confused on. but if you trust yourself take it somewhere and have them do it.
rajubhaiya is offline   Reply With Quote
Old 09-30-2020, 02:31 AM   #23
rajubhaiya
Registered User
 
Join Date: Sep 2020
Posts: 2
Still waiting for someone to help me with the issue
__________________
rajubhaiya is offline   Reply With Quote
Old 10-21-2020, 09:47 PM   #24
feng090
Registered User
 
Join Date: Oct 2020
Posts: 16
hallohallo
feng090 is offline   Reply With Quote
Old 10-21-2020, 09:48 PM   #25
feng090
Registered User
 
Join Date: Oct 2020
Posts: 16
hallohallo hallohallo with the issue
feng090 is offline   Reply With Quote
Old 10-21-2020, 09:48 PM   #26
feng090
Registered User
 
Join Date: Oct 2020
Posts: 16
nice to meet you
feng090 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 05:17 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com