.:HSTuners::

ebpda9 · 11-16-2003, 08:51 PM

i have installed a while ago my viper 550esp. great alarm but because some events this summer i was forced to install a fuel cut off switch in my car, and now i put the switch on everytime i get out of the car for more than few minutes. since the winter is coming i still wanna use the remote start feature but i don't want to leave the fuel switch on for the same reasons i turn the fuel off when i leave the car, so basically i was wondering in what alarm wire i should tap the fuel pump to run with the fuel switch off, but not when someone tries to crank it from the ignition switch. i know this sounds more complicated than it really is but i do not want to mess something up.

thanks in advance brandon

11-18-2003, 06:58 PM

try re wording it if i'm wrong

so you want the fuel to be cut off when your alarm is set?, but to work when u start your car with the remote starter? Do you have a ignition kill on your alarm?

ebpda9 · 11-18-2003, 09:33 PM

well i have a fuel cut off switch that i use it independent from the alram. it's just a switch in series with the fuel pump, and i wanna bypass it when i try to start the engine from the remote. did i make more sense now ?

11-18-2003, 10:44 PM

so hook up a relay inline instead of the switch and hook it up to the wire coming off the alarm (ground when armed)

11-19-2003, 08:56 PM

email me if u got any more questions

11-16-2003, 08:51 PM	#1
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	here is another one for brandon i have installed a while ago my viper 550esp. great alarm but because some events this summer i was forced to install a fuel cut off switch in my car, and now i put the switch on everytime i get out of the car for more than few minutes. since the winter is coming i still wanna use the remote start feature but i don't want to leave the fuel switch on for the same reasons i turn the fuel off when i leave the car, so basically i was wondering in what alarm wire i should tap the fuel pump to run with the fuel switch off, but not when someone tries to crank it from the ignition switch. i know this sounds more complicated than it really is but i do not want to mess something up. thanks in advance brandon __________________

11-18-2003, 09:33 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	well i have a fuel cut off switch that i use it independent from the alram. it's just a switch in series with the fuel pump, and i wanna bypass it when i try to start the engine from the remote. did i make more sense now ? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-18-2003, 06:58 PM	#2
BrandonClaps Posts: n/a	try re wording it if i'm wrong so you want the fuel to be cut off when your alarm is set?, but to work when u start your car with the remote starter? Do you have a ignition kill on your alarm?

11-18-2003, 10:44 PM	#4
BrandonClaps Posts: n/a	so hook up a relay inline instead of the switch and hook it up to the wire coming off the alarm (ground when armed)

11-19-2003, 08:56 PM	#5
BrandonClaps Posts: n/a	email me if u got any more questions