.:HSTuners::

06-01-2004, 10:24 PM

Does anyone know how many quarts of OIL, or in the south "UL", a 96 4 dr LX 5 spd needs? I wanna change my own oil and I dont have my owners MAN. dont know where to fidn that info. I = #1 n00bz0r. Thanks if anyone can help

06-02-2004, 12:00 AM

Ok 5 people have looked at this but I have not gotten a response yet! I am guessing that this must have stumped more than just me! HAHA well I hope someone can help me out!!

*AzCivic* · 06-02-2004, 01:06 AM

mine takes about 3.5quarts, yours should be about the same.

*pdiggitydogg* · 06-02-2004, 05:26 AM

Add 3qts and then add another SLOWLY until the dip stick has oil inbetween the holes at the bottom

*BlackDeuceCoupe* · 06-02-2004, 05:59 AM

I put 4 quarts of Mobil 1 in my car, but I run a larger filter (left) than normal (right)...

You didn't ask, but your tranny takes 2 quarts. I use Red Line MT-90.

06-02-2004, 06:03 AM

Hey thanks a lot for your input..... this 96 is gonna take a loOOOoooOOOOt of work before i am finished with it. HAHA so expect more n00bness out of meh! I didnt even think to just add oil to my car until the dip stick said it was good to go.... n0000000bz0r i am

*pdiggitydogg* · 06-02-2004, 05:51 PM

we all start somewhere

RxGoaT13 · 06-02-2004, 08:37 PM

nOOOOOObz0r,

i guess im not down with the lingo

06-02-2004, 08:41 PM

Hey BlackDeuceCoupe..... how to put liquids in the tranny? I know I didnt ask but now that u said something I am thinking i need to do this... right away???

06-02-2004, 08:42 PM

rxgoat.... n00bz0r = newbie= ME HEHE

*pdiggitydogg* · 06-02-2004, 08:52 PM

there are 2 ways (probably more...) to get mtf into the tranny
1) the fill plug on the side of the tranny
2) from the vss hole on top/back of the tranny

(I fill via the vss because its A LOT easier)

read through this post:
http://honda-tech.com/zerothread?id=382416
and you can get a good idea of where stuff is. Then go outside and find it on your car.

*BlackDeuceCoupe* · 06-03-2004, 06:28 AM

Quote:

Originally posted by NAPALMsunrise
Hey BlackDeuceCoupe..... how to put liquids in the tranny? I know I didnt ask but now that u said something I am thinking i need to do this... right away???

06-03-2004, 09:25 AM

Note added to above^^^
After you drain the tranny fluid and replace the drain plug, fill the tranny until the trany fluid just barely comes out of the hole. It should be 2 qts. To fill it, you will need a funnel with a hose small enough to go into the hole.

06-02-2004, 05:59 AM	#5
BlackDeuceCoupe The Great Ape Join Date: Sep 2001 Location: Skull Island Posts: 774	I put 4 quarts of Mobil 1 in my car, but I run a larger filter (left) than normal (right)... You didn't ask, but your tranny takes 2 quarts. I use Red Line MT-90. __________________ Posted by BlackDeuceCoupe - 2oo0 Honda CiViC FBP HX cOUPe "Pay special attention to posts by BlackDeuceCoupe, the instigator of the forum, who does a nice job of breaking my column and responses down." - Paul Brink, ASU State Press DISCLAIMER The existence of BDC is disputable. The existence of views, in the absence of anyone to hold them is problematic. The existence of the reader is left as an exercise in the second order coefficient.

06-02-2004, 08:37 PM	#8
RxGoaT13 4th Gear Join Date: Apr 2004 Location: Modesto, CA Posts: 801	nOOOOOObz0r, i guess im not down with the lingo __________________ http://www.myspace.com/rxgoat13

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-01-2004, 10:24 PM	#1
NAPALMsunrise Posts: n/a	Oils Does anyone know how many quarts of OIL, or in the south "UL", a 96 4 dr LX 5 spd needs? I wanna change my own oil and I dont have my owners MAN. dont know where to fidn that info. I = #1 n00bz0r. Thanks if anyone can help

06-02-2004, 12:00 AM	#2
NAPALMsunrise Posts: n/a	Ok 5 people have looked at this but I have not gotten a response yet! I am guessing that this must have stumped more than just me! HAHA well I hope someone can help me out!!

06-02-2004, 01:06 AM	#3
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	mine takes about 3.5quarts, yours should be about the same.

06-02-2004, 05:26 AM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Add 3qts and then add another SLOWLY until the dip stick has oil inbetween the holes at the bottom

06-02-2004, 06:03 AM	#6
NAPALMsunrise Posts: n/a	Hey thanks a lot for your input..... this 96 is gonna take a loOOOoooOOOOt of work before i am finished with it. HAHA so expect more n00bness out of meh! I didnt even think to just add oil to my car until the dip stick said it was good to go.... n0000000bz0r i am

06-02-2004, 05:51 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	we all start somewhere

06-02-2004, 08:41 PM	#9
NAPALMsunrise Posts: n/a	Hey BlackDeuceCoupe..... how to put liquids in the tranny? I know I didnt ask but now that u said something I am thinking i need to do this... right away???

06-02-2004, 08:42 PM	#10
NAPALMsunrise Posts: n/a	rxgoat.... n00bz0r = newbie= ME HEHE

06-02-2004, 08:52 PM	#11
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	there are 2 ways (probably more...) to get mtf into the tranny 1) the fill plug on the side of the tranny 2) from the vss hole on top/back of the tranny (I fill via the vss because its A LOT easier) read through this post: http://honda-tech.com/zerothread?id=382416 and you can get a good idea of where stuff is. Then go outside and find it on your car.

06-03-2004, 09:25 AM	#13
rgbintx Posts: n/a	Note added to above^^^ After you drain the tranny fluid and replace the drain plug, fill the tranny until the trany fluid just barely comes out of the hole. It should be 2 qts. To fill it, you will need a funnel with a hose small enough to go into the hole.