.:HSTuners::

94_AcCoRd_EX · 10-20-2001, 08:44 PM

Hey guys, quick question, I don't have any manuals with me. What would you torque stock wheels too? Thanks

Accord Man · 10-23-2001, 10:36 AM

You mean the nuts?

Cause if so, I havent a clue?!

I just tighten them enough so they wouldnt get loose, but not too much to f*** up the thread.

94_AcCoRd_EX · 10-23-2001, 12:11 PM

Yeah, there is a specific number to torque them to if you have a torque wrench, and I was wondering what it is. I'm going to go buy a torque wrench because it is SO much better to use.

Accord Man · 10-23-2001, 12:24 PM

Quote:

Originally posted by 94_AcCoRd_EX
Yeah, there is a specific number to torque them to if you have a torque wrench, and I was wondering what it is. I'm going to go buy a torque wrench because it is SO much better to use.

In what does it help?

94_AcCoRd_EX · 10-23-2001, 05:19 PM

Quote:

Originally posted by Accord Man

In what does it help?

There are many applications where a recommended torque is given to best tighten w/o overtightening a bolt. One of those is lugs. I read a story on SRO where a guy was racing, had overtorqued lugs, wrecked his car, and died. That is an extreme case, but you get the point.

Accord Man · 10-23-2001, 07:26 PM

Quote:

Originally posted by 94_AcCoRd_EX

There are many applications where a recommended torque is given to best tighten w/o overtightening a bolt. One of those is lugs. I read a story on SRO where a guy was racing, had overtorqued lugs, wrecked his car, and died. That is an extreme case, but you get the point.

whoa extreme example..

ok gotta check into that.

10-25-2001, 05:26 AM

80ft/lbs

Accord Man · 10-25-2001, 07:35 AM

Is it the same for all cars.. 2000 Civics ?

10-25-2001, 07:43 AM

Quote:

Originally posted by Accord Man
Is it the same for all cars.. 2000 Civics ?

I am almost positive that all Honda's require that torque spec. However, I will check.

Accord Man · 10-25-2001, 07:47 AM

Quote:

Originally posted by Big James

I am almost positive that all Honda's require that torque spec. However, I will check.

Alright, thanks Big J!

94_AcCoRd_EX · 10-25-2001, 11:04 AM

Anyone have any recommendations on a decent torque wrench for under $100? I know good ones are more expensive, but I really don't want to spend that much right now.

Accord Man · 10-25-2001, 11:07 AM

Quote:

Originally posted by 94_AcCoRd_EX
Anyone have any recommendations on a decent torque wrench for under $100? I know good ones are more expensive, but I really don't want to spend that much right now.

Ya I'd like to know as well..

94_ACC: What size are you getting?

10-25-2001, 11:50 AM

Quote:

Originally posted by 94_AcCoRd_EX
Anyone have any recommendations on a decent torque wrench for under $100? I know good ones are more expensive, but I really don't want to spend that much right now.

Check at Sears. Craftsman makes excellent tools with lifetime warranties, and good prices.

As far as the TQ specs, I can not find any other specs. So it looks like all Hondas are 80

94_AcCoRd_EX · 10-25-2001, 05:43 PM

Thanks for the help Big James!

94_AcCoRd_EX · 10-26-2001, 12:51 AM

I know this is off of the subject, but what do you torque the spark plugs to? I'm looking to get a good all purpose wrench, not two with different ranges.

Accord Man · 10-26-2001, 09:32 AM

for me it was 13 lbs-ft

Racing Rice · 10-26-2001, 10:04 AM

Quote:

Originally posted by Big James

I am almost positive that all Honda's require that torque spec. However, I will check.

yeah... Im pretty sure they do to..

94_AcCoRd_EX · 10-26-2001, 12:05 PM

Quote:

Originally posted by Accord Man
for me it was 13 lbs-ft

Thanks, I just wanted a general range. That should be perfect.

Accord Man · 10-26-2001, 12:07 PM

So how long are you getting yours?

I'm gonna get one as well..

94_AcCoRd_EX · 10-26-2001, 09:01 PM

Quote:

Originally posted by Accord Man
So how long are you getting yours?

I'm gonna get one as well..

I'm not 100% sure yet. I'll probably pick one up on Monday. I'm at my parents' house right now for the weekend.

Accord Man · 10-27-2001, 12:57 PM

Alright then..

Once you get yours, please let me know what size you got.

94_AcCoRd_EX · 10-27-2001, 07:12 PM

Quote:

Originally posted by Accord Man
Alright then..

Once you get yours, please let me know what size you got.

Sounds good :

:

94_AcCoRd_EX · 11-08-2001, 12:16 AM

Well, I haven't purchased one yet... I kind of put my car on the back burner and bought some new paintball equipment. Anyways, this is one that I was looking at.

Note: The link is a mile long, so go to http://www.craftsman.com and enter item # 00944596000

Accord Man · 11-08-2001, 11:18 AM

goody!

thanks

11-19-2001, 12:21 PM

over torqueing the lug nuts will warp your rotors because of the pressure on them, that is really tight though.

Accord Man · 11-19-2001, 01:40 PM

Quote:

Originally posted by urbanlegend21
over torqueing the lug nuts will warp your rotors because of the pressure on them, that is really tight though.

hey welcome to HS!!

Warp rotors really?!
I never heard of that one.. I dont really see, how it could be done.

12-05-2001, 11:53 AM

torque lugnuts to 75-80 lbs

10-20-2001, 08:44 PM	#1
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Specs to torque stock wheels. Hey guys, quick question, I don't have any manuals with me. What would you torque stock wheels too? Thanks __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

10-23-2001, 10:36 AM	#2
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	You mean the nuts? Cause if so, I havent a clue?! I just tighten them enough so they wouldnt get loose, but not too much to f* up the thread. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<**

10-23-2001, 12:11 PM	#3
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Yeah, there is a specific number to torque them to if you have a torque wrench, and I was wondering what it is. I'm going to go buy a torque wrench because it is SO much better to use. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

10-25-2001, 07:35 AM	#8
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	Is it the same for all cars.. 2000 Civics ? __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

10-25-2001, 11:04 AM	#11
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Anyone have any recommendations on a decent torque wrench for under $100? I know good ones are more expensive, but I really don't want to spend that much right now. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

10-25-2001, 05:43 PM	#14
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Thanks for the help Big James! __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

10-26-2001, 12:51 AM	#15
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	I know this is off of the subject, but what do you torque the spark plugs to? I'm looking to get a good all purpose wrench, not two with different ranges. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

10-26-2001, 09:32 AM	#16
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	for me it was 13 lbs-ft __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

10-26-2001, 12:07 PM	#19
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	So how long are you getting yours? I'm gonna get one as well.. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

10-27-2001, 12:57 PM	#21
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	Alright then.. Once you get yours, please let me know what size you got. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

11-08-2001, 12:16 AM	#23
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Well, I haven't purchased one yet... I kind of put my car on the back burner and bought some new paintball equipment. Anyways, this is one that I was looking at. Note: The link is a mile long, so go to http://www.craftsman.com and enter item # 00944596000 __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

11-08-2001, 11:18 AM	#24
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	goody! thanks __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

11-19-2001, 12:21 PM	#25
urbanlegend21 Posts: n/a	over torqueing the lug nuts will warp your rotors because of the pressure on them, that is really tight though.

12-05-2001, 11:53 AM	#27
urbanlegend21 Posts: n/a	torque lugnuts to 75-80 lbs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode