.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Step By Step
User Name
Password
FAQ Members List Calendar Mark Forums Read

Closed Thread
 
Thread Tools Display Modes
Old 09-20-2001, 10:25 PM   #1
2000Pimpinex
Super Moderator
 
2000Pimpinex's Avatar
 
Join Date: Sep 2001
Location: Kentucky
Age: 43
Posts: 1,427
Center Piece Removal For Head Unit

This process will give you access to the factory head unit so you can replace it without breaking or damaging any pieces. Its easy to do but takes patience.

-Remove the panel below steering column ( 3 visible screws )

-Remove the now-visible 2 brass colored phillips screws on left of the panel under the radio ( the 12v outlet is mounted on this panel )

-Empty the Glove Box and pull in the tabs at the top so the box opens all the way pointing down

-Remove now-visible 2 brass colored phillips screws on right of panel under the radio

-Remove the 2 brass colored screws at the top of this same panel

-Remove Panel

-You can now get to the two silver 8mm bolts holding the bottom/back of the stock radio in

This will save you the trouble of having someone else put your head unit in, not including some money. Take your time and good luck.
__________________
2008 Mustang GT
1998 Hatchback SOLD
1992 Hatchback w/ JDM H22A SOLD
1985 Ford Bronco XLT 5.8 351W
w/ 33X12.5X15
2000Pimpinex is offline  
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:38 AM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com