.:HSTuners::

Kyle · 03-17-2002, 03:10 PM

Hey guys...i was wondering...is there anyway to change from those roll up windows and those manual locks to power windows and locks?...

Thanks

ebpda9 · 03-17-2002, 03:14 PM

i think you can but you need to change the door panels and get a power lock contol module. i'm not sure but the wiring harnesses should be in the doors. go and check your scrap yard for a civic with those things. You have a dx right ?

4jacks · 03-17-2002, 09:21 PM

Putting Power Locks on Isn't bad, you can get (I think thier Called Accuators) to pop your existing locks and wire all that to a Keyless entry system. Brandon Claps is the man to ask about this... post this question up in the 12V forum... he'll let you know.

I think Hondaman is right about the windows. I have roll up windows too.. and you will need to change the whole door panel... if you are changing the door panel... you might as well look for some w/ Power locks also already on them.

03-18-2002, 08:07 PM

if you are going to get power door locks you don't have to change your door panel go to www.autoloc.com they have a kit where you just use your regular lock to lock and unlock your doors,they have other kits also for the window and trunk.

03-17-2002, 03:10 PM	#1
Kyle elyK Join Date: Mar 2002 Location: New Braunfels, TX Age: 37 Posts: 3,390	auto-locks/windows/everything Hey guys...i was wondering...is there anyway to change from those roll up windows and those manual locks to power windows and locks?... Thanks __________________ IGNORE THE FACTS EXPLORE THE TRUTH

03-17-2002, 03:14 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	i think you can but you need to change the door panels and get a power lock contol module. i'm not sure but the wiring harnesses should be in the doors. go and check your scrap yard for a civic with those things. You have a dx right ? __________________

03-17-2002, 09:21 PM	#3
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 44 Posts: 1,129	Putting Power Locks on Isn't bad, you can get (I think thier Called Accuators) to pop your existing locks and wire all that to a Keyless entry system. Brandon Claps is the man to ask about this... post this question up in the 12V forum... he'll let you know. I think Hondaman is right about the windows. I have roll up windows too.. and you will need to change the whole door panel... if you are changing the door panel... you might as well look for some w/ Power locks also already on them. __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2002, 08:07 PM	#4
lx4life Posts: n/a	if you are going to get power door locks you don't have to change your door panel go to www.autoloc.com they have a kit where you just use your regular lock to lock and unlock your doors,they have other kits also for the window and trunk.