.:HSTuners::

*KwikR6* · 11-21-2002, 01:03 PM

It was quite easy actually. First all you have to do it take out your corner signals to take out your regular corners. They aren't held in by screws or anything just a little clip. Push the clip in and out pops the corner (you'll know what I mean when you get inside your bumper).
Second the amber color that's inside there is glued in pretty good. I had to break mine apart to get it out. Try not just to break it into 1000 pieces because you need to make a trace of it. once out take what ever material your going to be using and trace it out. What I used it the cover that goes over Hallogen ligts. I think you can also get some clearish whiteish plastic at Home depot or something like that. Now make your trace. To cut it out I used my dremel tool. I took the cutting blade out and cut out the corner. To smooth everything off I took the dremel tool and replaced the cutting tool with a sanding end. I sanded down all the rough edges and made it look nice. The fitting is kind of a pain because it has to be perfect or else it's going to look like crap. Once you got your corner all sanded down and it fits nicely and stays in. Take some clear silicon and run a bead of it all the way around. Ok now your thinking this looks like shit. But take your finger and smooth it all out. So that's its barely noticable, and so that any silicon gets in the cracks and holds the corner in place. Also siliconing to make sure any water and dirt don't get in behind the corner and make it look bad. Then install. It makes quite a difference and looks hella good. Try it out!!! Advice. Take your time!

94_AcCoRd_EX · 11-21-2002, 01:51 PM

Sweet man, you should copy this into the 'step by step' forum.

*KwikR6* · 11-21-2002, 02:07 PM

Quote:

Originally posted by 94_AcCoRd_EX
Sweet man, you should copy this into the 'step by step' forum.

OK
Now it's all the way down at the bottom where no one can see it anyway

*ChrisCantSkate* · 11-21-2002, 04:04 PM

thermal will sticky it

ebpda9 · 11-21-2002, 04:16 PM

he can sticky it. any pics ?

*KwikR6* · 11-22-2002, 12:13 PM

Quote:

Originally posted by hondaman-iac
he can sticky it. any pics ?

Yup..this weekend!!!
my buddy is bringing his Digital Camera in town this weekend!!!
So Hopefully by sunday

delsolvtec · 11-24-2002, 11:48 PM

I made my own clear corners by just simply breaking the amber part of the lense out of the light. That was it, that simple.

*KwikR6* · 11-25-2002, 12:14 AM

Quote:

Originally posted by delsolvtec
I made my own clear corners by just simply breaking the amber part of the lense out of the light. That was it, that simple.

You didn't replace it with any thing?

ShEaNy · 11-25-2002, 12:29 AM

pics?? its sundayy

11-25-2002, 01:00 AM

there comming hold your horses!

delsolvtec · 11-25-2002, 02:01 AM

Quote:

Originally posted by dereks civic
You didn't replace it with any thing?

Nope, broke the amber part out and reinstalled the light in the car. It's clear and hasn't had a problem in well over a year.

Here is a pic of the corner light... Click the link, printroom won't let you link pics to this site for some reason.

pic of corner light

delsolvtec · 11-25-2002, 02:06 AM

found one that does link to this site.. here ya go..

*KwikR6* · 11-25-2002, 11:52 AM

Oh I already cleared those out....I don't mean the blinkers....I mean the ones on the bumper...below my corner signal....check my signature...the pic in my signature doesn't show my clear signal lights also. It's an old pic

delsolvtec · 11-26-2002, 02:26 AM

ahhh, the bumper lenses. I don't have any on my car. The aftermarket kit doesn't have them. Those are just reflectors if I'm not mistaken. I just painted the one's on my stock bumpers black.

*KwikR6* · 11-26-2002, 02:28 AM

Quote:

Originally posted by delsolvtec
ahhh, the bumper lenses. I don't have any on my car. The aftermarket kit doesn't have them. Those are just reflectors if I'm not mistaken. I just painted the one's on my stock bumpers black.

yeah I forgot the name of them..had a bad day....hahaha

delsolvtec · 11-26-2002, 12:34 PM

dumb ass...

j/k

*KwikR6* · 11-26-2002, 12:36 PM

Quote:

Originally posted by delsolvtec
dumb ass... j/k

True that..

11-21-2002, 01:03 PM	#1
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Made my own clear corners. It was quite easy actually. First all you have to do it take out your corner signals to take out your regular corners. They aren't held in by screws or anything just a little clip. Push the clip in and out pops the corner (you'll know what I mean when you get inside your bumper). Second the amber color that's inside there is glued in pretty good. I had to break mine apart to get it out. Try not just to break it into 1000 pieces because you need to make a trace of it. once out take what ever material your going to be using and trace it out. What I used it the cover that goes over Hallogen ligts. I think you can also get some clearish whiteish plastic at Home depot or something like that. Now make your trace. To cut it out I used my dremel tool. I took the cutting blade out and cut out the corner. To smooth everything off I took the dremel tool and replaced the cutting tool with a sanding end. I sanded down all the rough edges and made it look nice. The fitting is kind of a pain because it has to be perfect or else it's going to look like crap. Once you got your corner all sanded down and it fits nicely and stays in. Take some clear silicon and run a bead of it all the way around. Ok now your thinking this looks like shit. But take your finger and smooth it all out. So that's its barely noticable, and so that any silicon gets in the cracks and holds the corner in place. Also siliconing to make sure any water and dirt don't get in behind the corner and make it look bad. Then install. It makes quite a difference and looks hella good. Try it out!!! Advice. Take your time! __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

11-21-2002, 01:51 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Sweet man, you should copy this into the 'step by step' forum. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

11-21-2002, 04:04 PM	#4
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	thermal will sticky it __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

11-21-2002, 04:16 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	he can sticky it. any pics ? __________________

11-24-2002, 11:48 PM	#7
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 48 Posts: 594	I made my own clear corners by just simply breaking the amber part of the lense out of the light. That was it, that simple. __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

11-25-2002, 12:29 AM	#9
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 39 Posts: 3,821	pics?? its sundayy

11-25-2002, 01:00 AM	#10
jaywho123 Posts: n/a	there comming hold your horses!

11-25-2002, 02:06 AM	#12
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 48 Posts: 594	found one that does link to this site.. here ya go.. __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

11-25-2002, 11:52 AM	#13
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Oh I already cleared those out....I don't mean the blinkers....I mean the ones on the bumper...below my corner signal....check my signature...the pic in my signature doesn't show my clear signal lights also. It's an old pic __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

11-26-2002, 02:26 AM	#14
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 48 Posts: 594	ahhh, the bumper lenses. I don't have any on my car. The aftermarket kit doesn't have them. Those are just reflectors if I'm not mistaken. I just painted the one's on my stock bumpers black. __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

11-26-2002, 12:34 PM	#16
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 48 Posts: 594	dumb ass... j/k __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode