.:HSTuners::

03-17-2002, 04:55 PM

Ok,my stupid question is:
i have an interior car neon that works with a car lighter adapter.
i cut off the adapter and installed a swith on it and when i connected it to my car battery,it worked fine.Now,i'd like to know if i can run a regular 4 gauge amp wire from the battery to a stinger distribution block(that i already have but is not hooked up to anything)and from the distribution block connect my neon wire.the Distribution block is one 4 gauge entry and four 8 gauge out.and also.if i can do that,later on if i buy a small amp...will y be able to connect my amp from that same d-block?

thanks in advance

Phil

03-17-2002, 04:56 PM

Sorry about the smily..it's not suppose to be there

2ndGenTeg: All fixed, bro!

2ndGenTeg · 03-18-2002, 12:34 AM

I'd wire the neon to your fuse box. You could wire it in with just about anything, I.E.:

1. A constant- so when the car is on, the neon is on.
2. A constant, with an on/off switch, so you can have it on whenever your heart desires.
3. Your headlights or parking lights, so it's only on at night.
4. Just about anything.

That's what I would do.

03-17-2002, 04:55 PM	#1
Accord Posts: n/a	Stupid wiring question Ok,my stupid question is: i have an interior car neon that works with a car lighter adapter. i cut off the adapter and installed a swith on it and when i connected it to my car battery,it worked fine.Now,i'd like to know if i can run a regular 4 gauge amp wire from the battery to a stinger distribution block(that i already have but is not hooked up to anything)and from the distribution block connect my neon wire.the Distribution block is one 4 gauge entry and four 8 gauge out.and also.if i can do that,later on if i buy a small amp...will y be able to connect my amp from that same d-block? thanks in advance Phil Last edited by 2ndGenTeg : 03-18-2002 at 12:30 AM.

03-17-2002, 04:56 PM	#2
Accord Posts: n/a	Sorry about the smily..it's not suppose to be there 2ndGenTeg: All fixed, bro! Last edited by 2ndGenTeg : 03-18-2002 at 12:31 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2002, 12:34 AM	#3
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 43 Posts: 830	I'd wire the neon to your fuse box. You could wire it in with just about anything, I.E.: 1. A constant- so when the car is on, the neon is on. 2. A constant, with an on/off switch, so you can have it on whenever your heart desires. 3. Your headlights or parking lights, so it's only on at night. 4. Just about anything. That's what I would do.