.:HSTuners::

*pdiggitydogg* · 10-13-2005, 09:20 PM

For those that care to know, the obd2 iacv for integra ls/gsr and d16y8, though different part numbers are 100% compatible.

Today, my y8's iacv died and I wasnt about to pay a single dime for that thing, so I thought that the LS's IACV would fit...it does! It works! No more CEL!

Just sharing

ebpda9 · 10-13-2005, 10:08 PM

good.

sicones · 10-14-2005, 08:08 AM

and the obd1 (TEC) iacv DOES NOT FIT and is not interchangable, which is what I heard, firgured this out when we did our 2/3 wire iacv/manual swaps, I actualty have a brand new $135 iacv sitting in my garage as a back up

JDMFantasy2k · 10-14-2005, 09:18 AM

where the fuck is this thing located, i've heard all about it and i don't even know what it does

ebpda9 · 10-14-2005, 09:24 AM

on b,d series should be on the back on the air plenum, next to the tps. on the 90-93 accord it is next to the throttle rotor. kinda acts as a throttle buterfly when driving.

*pdiggitydogg* · 10-14-2005, 10:57 AM

Number 9
Its adjusts the idle when cold, through thermo sensors, a piston/butterfly combo, and coolant temps

Quote:

Definition: An electrically-operated valve which allows air to bypass the throttle plate in a fuel injected engine to regulate engine idle speed.

Basically, its a giant pain in the ass

thermal · 10-15-2005, 07:07 AM

good shit. I didnt know that. If I did, I would've kept the one from my Y8....... It is always nice to have an extra one. I know that my ITR one is about to go bad.....

*pdiggitydogg* · 10-15-2005, 12:47 PM

the itr one will probably work too, since its the same as the b16a2's

JDMFantasy2k · 10-15-2005, 12:55 PM

how do you know when it goes bad? Fucked up idle i assume?

*pdiggitydogg* · 10-15-2005, 01:03 PM

When it gets dirty, your idle will bounce around, when its cool outside, from 500-1500. At that point, you just unbolt it from the IM and shoot it with some carb cleaner for awhile, to rinse it out, and just bolt it back on. This is generally the cause of fluctuating idle issues, if its not the FITV (older cars)

When it dies, your cel pops on (# 14), your idle shoots up to a solid 2-2500rpm, and on/off throttle becomes really jerky (you need to slip the clutch to keep it even remotely smooth). It then needs to be replaced. If its not totally shot, you can just reset the cel and it will work for a little while longer (before it pops back on).

sicones · 10-18-2005, 11:02 PM

hey I jsut read at honda tech, your iacv is still fucked up, do you have an DMM check the resistance of the valve I think it should be like 12ohms, check both of them your old one and the new one
connect 12 volts directly to the valve see if it clicks open

*pdiggitydogg* · 10-19-2005, 07:55 PM

yeah, shits all f*cked up...
I just put my hand on the valve to start up earlier today and it does click open
Its so weird...Im checking the wires this weekend. If thats not it I dont know what else to check!

sicones · 10-19-2005, 08:05 PM

is the car at least drivable, how bad does it surge??

*pdiggitydogg* · 10-19-2005, 09:26 PM

yeah, I can drive it...its weird since the cel only comes on at what seems random times

the surging off/on throttle at that point makes it drive like its my first day with a manual transmission if I dont seriously over slip the clutch

10-13-2005, 09:20 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Compatible IACV For those that care to know, the obd2 iacv for integra ls/gsr and d16y8, though different part numbers are 100% compatible. Today, my y8's iacv died and I wasnt about to pay a single dime for that thing, so I thought that the LS's IACV would fit...it does! It works! No more CEL! Just sharing

10-13-2005, 10:08 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	good. __________________

10-14-2005, 09:18 AM	#4
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	where the fuck is this thing located, i've heard all about it and i don't even know what it does __________________

10-14-2005, 09:24 AM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	on b,d series should be on the back on the air plenum, next to the tps. on the 90-93 accord it is next to the throttle rotor. kinda acts as a throttle buterfly when driving. __________________

10-15-2005, 07:07 AM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	good shit. I didnt know that. If I did, I would've kept the one from my Y8....... It is always nice to have an extra one. I know that my ITR one is about to go bad..... __________________ Project Teg Visit the Turbo Forum

10-14-2005, 08:08 AM	#3
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	and the obd1 (TEC) iacv DOES NOT FIT and is not interchangable, which is what I heard, firgured this out when we did our 2/3 wire iacv/manual swaps, I actualty have a brand new $135 iacv sitting in my garage as a back up

10-15-2005, 12:47 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	the itr one will probably work too, since its the same as the b16a2's

10-15-2005, 12:55 PM	#9
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	how do you know when it goes bad? Fucked up idle i assume? __________________

10-15-2005, 01:03 PM	#10
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	When it gets dirty, your idle will bounce around, when its cool outside, from 500-1500. At that point, you just unbolt it from the IM and shoot it with some carb cleaner for awhile, to rinse it out, and just bolt it back on. This is generally the cause of fluctuating idle issues, if its not the FITV (older cars) When it dies, your cel pops on (# 14), your idle shoots up to a solid 2-2500rpm, and on/off throttle becomes really jerky (you need to slip the clutch to keep it even remotely smooth). It then needs to be replaced. If its not totally shot, you can just reset the cel and it will work for a little while longer (before it pops back on).

10-18-2005, 11:02 PM	#11
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	hey I jsut read at honda tech, your iacv is still fucked up, do you have an DMM check the resistance of the valve I think it should be like 12ohms, check both of them your old one and the new one connect 12 volts directly to the valve see if it clicks open

10-19-2005, 07:55 PM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	yeah, shits all f*cked up... I just put my hand on the valve to start up earlier today and it does click open Its so weird...Im checking the wires this weekend. If thats not it I dont know what else to check!

10-19-2005, 08:05 PM	#13
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	is the car at least drivable, how bad does it surge??

10-19-2005, 09:26 PM	#14
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	yeah, I can drive it...its weird since the cel only comes on at what seems random times the surging off/on throttle at that point makes it drive like its my first day with a manual transmission if I dont seriously over slip the clutch

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode