.:HSTuners::

05-14-2002, 06:58 PM

Hey all!
I am going to paint my stock bumper cover and was wondering if there are any links to some DIY sites that have a general step-by-step instructions (or) if any of you can give me a basic list of what to do from start to finish and what paint is best to use (phew!) I am going to do it myself until it comes out the best way possible so any ideas are greatly appreciated! Thanks! Cyber

slowEJ6 · 05-15-2002, 12:54 PM

use an air compressor/spray gun.

wet sand, wet sand, wet sand, primer, wet sand, paint, wet sand with a VERY fine grit, like 1500, clear, 2000. take your time

05-15-2002, 05:28 PM

Hmm, I was told that primer may cause the paint to chip. I was also told that I should look for a paint that has a flexing agent in it... does that make sense? Sheesh, maybe I should just take it to a shop!

Cyber

*KwikR6* · 05-16-2002, 09:48 AM

Quote:

Originally posted by CyberCivic97
Hmm, I was told that primer may cause the paint to chip. I was also told that I should look for a paint that has a flexing agent in it... does that make sense? Sheesh, maybe I should just take it to a shop! Cyber

Yeah definatly a flexing agent in the paint if your going to paint your bumper....it does make sense....i used to work in a body shop....make sure you use a paint with a flex agent

2000Pimpinex · 05-16-2002, 06:22 PM

It would definately be easier to have a shop do it. But if your proficient in painting and have faith in your abilities, then try and do it yourself. Just take your time and have patience.

slowEJ6 · 05-17-2002, 12:15 AM

flexing agent is great. be sure to prep right....the results once you paint will show how well you prepped/didnt prep.

05-14-2002, 06:58 PM	#1
CyberCivic97 Posts: n/a	Painting Stock Bumper Cover... Hey all! I am going to paint my stock bumper cover and was wondering if there are any links to some DIY sites that have a general step-by-step instructions (or) if any of you can give me a basic list of what to do from start to finish and what paint is best to use (phew!) I am going to do it myself until it comes out the best way possible so any ideas are greatly appreciated! Thanks! Cyber

05-16-2002, 06:22 PM	#5
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	It would definately be easier to have a shop do it. But if your proficient in painting and have faith in your abilities, then try and do it yourself. Just take your time and have patience. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-15-2002, 12:54 PM	#2
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	use an air compressor/spray gun. wet sand, wet sand, wet sand, primer, wet sand, paint, wet sand with a VERY fine grit, like 1500, clear, 2000. take your time

05-15-2002, 05:28 PM	#3
CyberCivic97 Posts: n/a	Hmm, I was told that primer may cause the paint to chip. I was also told that I should look for a paint that has a flexing agent in it... does that make sense? Sheesh, maybe I should just take it to a shop! Cyber

05-17-2002, 12:15 AM	#6
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	flexing agent is great. be sure to prep right....the results once you paint will show how well you prepped/didnt prep.