.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Step By Step
User Name
Password
Register FAQ Members List Calendar Mark Forums Read

Closed Thread
 
Thread Tools Display Modes
Old 02-16-2002, 09:56 AM   #1
DJZVTEC02
 
Posts: n/a
Exclamation 6th Generation Civic Skunk2 Camber Kit Install

Tools Needed
-14mm Wrench
-17mm Wrench

Parts Needed

**Removal of the shock body is also NOT needed**

-Skunk2 Camber Kit (Front)

-First remove your wheel and jack the car up

-Then Remove the 2 14mm Bolts holding the A Arm inplace

-Then place a deep socket 17mm Wrench and remove the castle bolt holding it in place

-Remove A Arm

-Install Skunk2 Unit

-Bolt everything up and install those little pins (codder pins) that they give you and wrap them around the castle bolt and this is what it would looks like after your done..


 
Closed Thread


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:32 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com