.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Wheels, Tires, Suspension, and Brakes
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 10-22-2002, 05:04 PM   #1
cashizslick
 
Posts: n/a
What is the difference between shocks and struts?

Are shocks and struts the same? Does my civic have both? Whats the difference between them/how do they work?

thanks alot for the info.
  Reply With Quote
Old 10-22-2002, 05:20 PM   #2
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
shocks usually just dumpen the motion of the spring while the strut acts as a shock and a spring (but not to the extent a spring does) hoever there is not too much difference between the 2 and can be refered as both.
__________________


ebpda9 is offline   Reply With Quote
Old 10-22-2002, 06:00 PM   #3
Solo2Man
 
Posts: n/a
A shock limits the amount of time the sping takes to compress, then quickly allows it to rebound (eliminating constant bouncing).
A strut does the same, but there is one major difference, A strut also provides lateral load bearing, whereas a shock does not.
To use a shock, you need a spring, and two arms, an upper, and lower. The arms do all the location work (keeping the wheel straight up and down). A strut eliminates the upper control arm, and uses a very strong rod to locate the upper end of the wheel. The strut does not allow a fine degree of suspension tuning (only goes up and down linerarally), and that is why people complain about the struts in the new civic. The gemometry is compromised, becuase you want more than simple up and down in suspension, since when a vehicle corners, the body rolls, causing the wheel angle to change. A two-arm suspension can compensate for this through static geometry, but a strut cannot. So they lean the strut inwards (camber) and hope all goes well.
  Reply With Quote
Old 10-22-2002, 06:05 PM   #4
Solo2Man
 
Posts: n/a
A shock limits the amount of time the sping takes to compress, then quickly allows it to rebound (eliminating constant bouncing).
A strut does the same, but there is one major difference, A strut also provides lateral load bearing, whereas a shock does not.
To use a shock, you need a spring, and two arms, an upper, and lower. The arms do all the location work (keeping the wheel straight up and down). A strut eliminates the upper control arm, and uses a very strong rod to locate the upper end of the wheel. The strut does not allow a fine degree of suspension tuning (only goes up and down linerarally), and that is why people complain about the struts in the new civic. The gemometry is compromised, becuase you want more than simple up and down in suspension, since when a vehicle corners, the body rolls, causing the wheel angle to change. A two-arm suspension can compensate for this through static geometry, but a strut cannot. So they lean the strut inwards (camber) and hope all goes well.
  Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -5. The time now is 10:53 AM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com