.:HSTuners::

silver · 11-19-2005, 01:47 PM

unfortunately there just aren't enough posts in this area, so i will try and keep you guys abreast of my two current projects.

1. 93 si hb
2. 00 itr

project #1 actually began today with the addition of this.

it's a fresh b16a block that has been hot tanked and has a fresh hone. i'll literally be piecing this motor together from the ground up with the finest pieces that japan has to offer. the goal for this is at least 200whp but run on 91octane.

project #2 has no current pics since i am awaiting the parts, but it will consist of buddy club spec 3+ cams, bc cam gears, bc valvetrain, toda timing belt, apexi vafc, mugen headgasket. goal for the build is just a well tuned dd street itr. i won't be doing this one myself as i don't want to take my head off and dive into my c5...so raceline development will be doing this one.

thermal · 11-19-2005, 05:01 PM

Goodluck with the build. You are gonna need some really high compression piston with that 1.6L. Believe it or not, you'll need some head work with that as well..... but I'm sure you already know that.....

silver · 11-19-2005, 05:55 PM

well it may not end up being a 1.6L for long

thermal · 11-19-2005, 06:58 PM

ha ha ha... that is what I thought!

Mr. Haan · 11-21-2005, 05:08 PM

best of luck to you on the new project..

Any plans yet for the b16 block? compression? bore?

silver · 11-22-2005, 11:38 AM

it's going to be a high comp build, looking at what kind of prices i'm getting on the parts, that will determine the details. everything will be blueprinted and balanced and then i'll move onto the head and get that half going.

11-19-2005, 05:55 PM	#3
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 42 Posts: 820	well it may not end up being a 1.6L for long __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

11-19-2005, 06:58 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	ha ha ha... that is what I thought! __________________ Project Teg Visit the Turbo Forum

11-21-2005, 05:08 PM	#5
Mr. Haan 1st Gear Join Date: Nov 2005 Location: nyc Age: 38 Posts: 51	best of luck to you on the new project.. Any plans yet for the b16 block? compression? bore? __________________ ..Haan Mek-Anic..

11-22-2005, 11:38 AM	#6
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 42 Posts: 820	it's going to be a high comp build, looking at what kind of prices i'm getting on the parts, that will determine the details. everything will be blueprinted and balanced and then i'll move onto the head and get that half going. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-19-2005, 01:47 PM	#1
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 42 Posts: 820	all motor ownz unfortunately there just aren't enough posts in this area, so i will try and keep you guys abreast of my two current projects. 1. 93 si hb 2. 00 itr project #1 actually began today with the addition of this. it's a fresh b16a block that has been hot tanked and has a fresh hone. i'll literally be piecing this motor together from the ground up with the finest pieces that japan has to offer. the goal for this is at least 200whp but run on 91octane. project #2 has no current pics since i am awaiting the parts, but it will consist of buddy club spec 3+ cams, bc cam gears, bc valvetrain, toda timing belt, apexi vafc, mugen headgasket. goal for the build is just a well tuned dd street itr. i won't be doing this one myself as i don't want to take my head off and dive into my c5...so raceline development will be doing this one. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

11-19-2005, 05:01 PM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Goodluck with the build. You are gonna need some really high compression piston with that 1.6L. Believe it or not, you'll need some head work with that as well..... but I'm sure you already know that..... __________________ Project Teg Visit the Turbo Forum