::Hondas Wanted::

Go Back   HSTuners > Tech Talk > High Performance
User Name
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Old 09-03-2001, 11:07 PM   #1
Posts: n/a
first question

so here I am a little confused. I am pulling code 1 on the dash and I have replaced the O2 sensor. So now what??? All the wiring has been checked at the ecm and in the bay so there's gotta be something I'm missin... the ecm has been reset about 3 times. any thoughts?
  Reply With Quote
Old 09-04-2001, 10:30 AM   #2
Posts: n/a
What car is it? What mods?

You need to check the voltage of the O2 sensor directly at the sensor, and check it at the ECU. You'll have to do this on a running car that has been fully warmed up, so be careful. If there is more than a little difference, you may need to replace the wireing between the sensor and the ECU.
  Reply With Quote
Old 09-05-2001, 12:19 AM   #3
Posts: n/a
the car is 94 hatch with B16 swap fully built head(cept for cams) ITR pistons, balanced,blueprinted,JUN Ultralite Flywheel...bla bla bla... but yeah I did that and everythin seems to be OK with the wiring, the O2 is new, and so now I'm just checkin all the circuts in the ECM...
  Reply With Quote
Old 09-05-2001, 09:08 AM   #4
Posts: n/a
Sorry I can't help any more. maybe you have a friend with an extra B16 ECU you could try. that would at least confirm or eliminate one possible source of the problem.

Oh yeah, I saw pics elsewhere, Nice car
  Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 12:56 AM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com