.:HSTuners::

02-13-2002, 09:58 PM

Ok about how long does it take for the ECU to program itself because on my car it seems like it ran better with out my CAI ?
And do they make ECU Reprogrammers or new Chips for my car?

Thanks

02-14-2002, 09:25 AM

The ECU is constantly learning, this process is sped up if you reset the ECU and clear it's then set parameters. It'll start back up on basic setting and use your current modifications to adjust itself based on what it's doing now. In short, reset the ECU.

*Whtehnda93DXSdn* · 02-14-2002, 10:48 PM

you should just pull the ECU Fuse and then start that ride up and let it just idle and don;t hit the gas for at least 7-10mins that should take care of you and get you reset.

well they make programmable ECU's like from AEM or you could get a Jet Chip upgrade but things liek that aren't normally done until a mojor portion of the mods are done. then you use that to tune what you have or get the mods full potential.

hope this might help a little..

02-13-2002, 09:58 PM	#1
Bk2oo4 Posts: n/a	Ecu ??? Ok about how long does it take for the ECU to program itself because on my car it seems like it ran better with out my CAI ? And do they make ECU Reprogrammers or new Chips for my car? Thanks

02-14-2002, 10:48 PM	#3
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	you should just pull the ECU Fuse and then start that ride up and let it just idle and don;t hit the gas for at least 7-10mins that should take care of you and get you reset. well they make programmable ECU's like from AEM or you could get a Jet Chip upgrade but things liek that aren't normally done until a mojor portion of the mods are done. then you use that to tune what you have or get the mods full potential. hope this might help a little.. __________________ Another good forum site: Tuners Alliance

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-14-2002, 09:25 AM	#2
VTC_CiViC Posts: n/a	The ECU is constantly learning, this process is sped up if you reset the ECU and clear it's then set parameters. It'll start back up on basic setting and use your current modifications to adjust itself based on what it's doing now. In short, reset the ECU.