.:HSTuners::

AkimboStylee · 06-06-2005, 10:51 PM

item #1:CF hatch cover
#2 : ef-9 Si-r front lip
and last but not least:since those pricks stole my rear section, why not!

tell me what you guys think, the last thing left is full lip kit, rota slipstreams, header(any comments), and carbon fibre hood(again any comments?)

sicones · 06-07-2005, 10:07 AM

f that hatch cover thing, get a one of those spoon CF duckbills

AkimboStylee · 06-07-2005, 11:12 AM

they dont make one for my chassis

sicones · 06-07-2005, 11:15 AM

what year hatch

*pdiggitydogg* · 06-07-2005, 11:40 AM

I dont think a cover thingy is worth that much money
I like that lip
So ridiculous that people jacked your rear section...Id just buy a replacement muffler and get it custom done for around $120 at a local shop

AkimboStylee · 06-07-2005, 11:59 AM

year: 89

i like the hach cover, because i have to see one in my area, i know i should just but a new muffler, but i just got a big paycheck(total of 2264.78, buying a dj pays well!!!) and i have heard alot about hks products, and taht is pretty cheap for that model. i am absolutly for sure going to buy that lip, but i also have people looking for an ef-9 at a junk yard. i have also got a complete y8 with less than 40,000 on it, that i am going to have to build up, cause i dont like the fact that my girls car is faster( a hell of a lot faster! which sucks because i hate being beat by a girl!!!!)

what header should i buy?
also the lastthing i am going to buy for the outside is a cf hood, but what brand?
also do they make a lip kit for my car? if so i want one!
awaiting next paycheck to buy rota's, and brake stuff (lines, rotors, pads, and im not doing a rear disk swap just yet!)

so far do you guys think this will make for a badass CLEAN car?

*pdiggitydogg* · 06-07-2005, 12:04 PM

Still, I wouldnt dump a fat load of cash on an entire setup, just because you have the money. It could be used better elsewhere, especially since you could get by at 1/3rd the price. Thats just what Id do anyways.

A DC header is a good choice. Theyre relatively cheap and good quality. I have an SS one that definatley flows better than stock and is 10x the header than the Powertech I had.

Vis hoods are good, so are Fiber Images. Im sure Stefan has good prices on cf hoods.

As long as you dont go with too big of a wheel on that chassis, I think it will look very nice. Which rotas are you looking at?
(I wish they made the Boost in 4x100...)

AkimboStylee · 06-07-2005, 12:08 PM

16" slipstreams BRONZE

they y8 was practically given to me, i just had to get it to my house. im going to build it up for boost, and make sure everything is goingto be correct before i swap it. i have got 2 jobs. soon to be 3.
1. Banquet Prep cook at local Hotel ($8/hr) m-f
2. local dj for small events ($125/hr about 3hrs each week, but just got a "sponser" so to speak, and they paid me a hefty bit of money.
3. detail service- $45 a car, a month, $15 extra if they want it waxed, and i have about 4 customers, and soon goinf to ahve the whole block which is about 10 cars, and that is basically my whole weekend. so that is why i want to do this. ramble, ramble, ramble......

ebpda9 · 06-07-2005, 01:20 PM

well i dunno, the dc sports headers are pretty decent and now i am working on a deal with rs-r exhausts. also i have been thinking about doing cf parts for cars. hoods might not be available till next year.

AkimboStylee · 06-07-2005, 01:21 PM

what about a lip kit?

ebpda9 · 06-07-2005, 01:24 PM

i will start doing lips and side skirts too soon, when i start making the cf parts.

AkimboStylee · 06-07-2005, 04:47 PM

not cf, abs

06-07-2005, 11:12 AM	#3
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	they dont make one for my chassis __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

06-07-2005, 11:59 AM	#6
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	year: 89 i like the hach cover, because i have to see one in my area, i know i should just but a new muffler, but i just got a big paycheck(total of 2264.78, buying a dj pays well!!!) and i have heard alot about hks products, and taht is pretty cheap for that model. i am absolutly for sure going to buy that lip, but i also have people looking for an ef-9 at a junk yard. i have also got a complete y8 with less than 40,000 on it, that i am going to have to build up, cause i dont like the fact that my girls car is faster( a hell of a lot faster! which sucks because i hate being beat by a girl!!!!) what header should i buy? also the lastthing i am going to buy for the outside is a cf hood, but what brand? also do they make a lip kit for my car? if so i want one! awaiting next paycheck to buy rota's, and brake stuff (lines, rotors, pads, and im not doing a rear disk swap just yet!) so far do you guys think this will make for a badass CLEAN car? __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

06-07-2005, 12:08 PM	#8
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	16" slipstreams BRONZE they y8 was practically given to me, i just had to get it to my house. im going to build it up for boost, and make sure everything is goingto be correct before i swap it. i have got 2 jobs. soon to be 3. 1. Banquet Prep cook at local Hotel ($8/hr) m-f 2. local dj for small events ($125/hr about 3hrs each week, but just got a "sponser" so to speak, and they paid me a hefty bit of money. 3. detail service- $45 a car, a month, $15 extra if they want it waxed, and i have about 4 customers, and soon goinf to ahve the whole block which is about 10 cars, and that is basically my whole weekend. so that is why i want to do this. ramble, ramble, ramble...... __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous Last edited by AkimboStylee : 06-07-2005 at 12:14 PM.

06-07-2005, 01:20 PM	#9
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	well i dunno, the dc sports headers are pretty decent and now i am working on a deal with rs-r exhausts. also i have been thinking about doing cf parts for cars. hoods might not be available till next year. __________________

06-07-2005, 01:21 PM	#10
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	what about a lip kit? __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

06-06-2005, 10:51 PM	#1
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	should i? item #1:CF hatch cover #2 : ef-9 Si-r front lip and last but not least:since those pricks stole my rear section, why not! tell me what you guys think, the last thing left is full lip kit, rota slipstreams, header(any comments), and carbon fibre hood(again any comments?) __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

06-07-2005, 10:07 AM	#2
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	f that hatch cover thing, get a one of those spoon CF duckbills

06-07-2005, 11:15 AM	#4
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	what year hatch

06-07-2005, 11:40 AM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	I dont think a cover thingy is worth that much money I like that lip So ridiculous that people jacked your rear section...Id just buy a replacement muffler and get it custom done for around $120 at a local shop

06-07-2005, 12:04 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Still, I wouldnt dump a fat load of cash on an entire setup, just because you have the money. It could be used better elsewhere, especially since you could get by at 1/3rd the price. Thats just what Id do anyways. A DC header is a good choice. Theyre relatively cheap and good quality. I have an SS one that definatley flows better than stock and is 10x the header than the Powertech I had. Vis hoods are good, so are Fiber Images. Im sure Stefan has good prices on cf hoods. As long as you dont go with too big of a wheel on that chassis, I think it will look very nice. Which rotas are you looking at? (I wish they made the Boost in 4x100...)

06-07-2005, 01:24 PM	#11
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	i will start doing lips and side skirts too soon, when i start making the cf parts. __________________

06-07-2005, 04:47 PM	#12
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	not cf, abs __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode