.:HSTuners::

01-16-2002, 11:11 PM

Ok can anyone help me figure out which wire is my starter wire??? i got the ignited push button starter and the wiring is pretty basic...only problem is that i dont know which is the starte button...i've seen the online How-To's and it says the thick black/white wire, but that didnt work for me...can anyone help me please??

btw, its for a 1995 civic ex if that matters...

01-17-2002, 12:40 AM

man ya gotta post stuff like this over in security, ANY WIRING stuff i got your answer ;D

on the ignition harness (take off the plastic cover under the steering wheel and it's behind some like black vinyl the wire is black with a white stripe)

1995 Honda Civic Wiring Colors/Location

Code:

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |
|              12V|white               |+  |steering column             |
|          STARTER|black/white         |+  |steering column             |
|         IGNITION|black/yellow        |+  |steering column             |
|  SECOND IGNITION|                    |   |                            |
|        ACCESSORY|yellow              |+  |steering column             |
|       POWER LOCK|green/white         |-  |2 pin plg blu-taped to      |
|     POWER UNLOCK|green/red           |-  |blue plg behind f-box       |
| PARKING LIGHTS +|red/black           |   |at fuse box or d.k.p        |
| PARKING LIGHTS -|                    |   |                            |
|       HEADLIGHTS|red/white           |+  |column (low beam only)      |
|     DOOR TRIGGER|lt. green/red       |-  |driver kick panel           |
|  TRUNK/HATCH PIN|grn/blk 2 sil.dots *|-  |blue conn. above fusbx      |
|         HOOD PIN|                    |   |                            |
|TRNK/HTCH RELEASE|                    |   |                            |
|  FCTRY ALARM ARM|                    |   |                            |
|FCTRY ALRM DISARM|                    |   |                            |
|       TACHOMETER|blue                |   |2-pin conn. near dist.      |
|       BRAKE WIRE|green/white         |+  |at brake switch             |
|     HORN TRIGGER|blue/green          |-  |at steering column          |
|           WIPERS|                    |   |                            |
|  LF WINDOW UP/DN|red/yellow - red/blu|A  |drivers door                |
|  RF WINDOW UP/DN|blue/yel - blue/grn |A  |drivers kick panel          |
|  LR WINDOW UP/DN|grn/yel - green     |A  |dkp, harness to rear        |
|  RR WINDOW UP/DN|yellow - yellow/grn |A  |dkp, harness to rear        |


Notes:
*1 On 2 doors, solid green w/ two silver dots

01-17-2002, 04:36 PM

thanks a lot for the wireing diagram...but after connecting all the wires, the button still wont work...i've doublechecked everything and nothing...i mean the light turns on, but thats about it...anyone else have any advise??

slowEJ6 · 01-17-2002, 04:39 PM

is your key in the ignition? :P

01-17-2002, 04:42 PM

ITS SUPPOSE TO BE IN?!?!

j/k...yea, i do everything normal...key on the second part, clutch in...everything...man...

slowEJ6 · 01-17-2002, 04:53 PM

Quote:

Originally posted by Infinity_Racer
ITS SUPPOSE TO BE IN?!?! j/k...yea, i do everything normal...key on the second part, clutch in...everything...man...

hmmm, recheck the wiring again. i know how much of a hassle it is do0d. ive installed stuff, wired everything up, wouldnt work, then just redid ALL the wiring and for some reason that seemed to fix it. worth a try i guess..... :o

01-17-2002, 05:00 PM

yea i'll re-wire everything in a lil bit...cus i know if i do it now, i mean get soo frustrated i start swinging my bat

slowEJ6 · 01-17-2002, 05:02 PM

Quote:

Originally posted by Infinity_Racer
yea i'll re-wire everything in a lil bit...cus i know if i do it now, i mean get soo frustrated i start swinging my bat

i dont think swingin a bat would help

but good luck with rewiring! i suggest listening to some good music while wiring......it helps calm you

01-23-2002, 06:32 PM

did you get it figured yet? let me know I do that for work all th etime.

01-23-2002, 11:38 PM

yo, one wire goes from 12v and the other wire goes to your starter wire. Are you sure the wires are connected properly? Do you have the wires backwards? If you need more help explain to me the directionjs and i'll tell ya exactly what to do, but a starter switch is only 1 wires

01-16-2002, 11:11 PM	#1
Infinity_Racer Posts: n/a	Push button Ok can anyone help me figure out which wire is my starter wire??? i got the ignited push button starter and the wiring is pretty basic...only problem is that i dont know which is the starte button...i've seen the online How-To's and it says the thick black/white wire, but that didnt work for me...can anyone help me please?? btw, its for a 1995 civic ex if that matters...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2002, 04:36 PM	#3
Infinity_Racer Posts: n/a	thanks a lot for the wireing diagram...but after connecting all the wires, the button still wont work...i've doublechecked everything and nothing...i mean the light turns on, but thats about it...anyone else have any advise??

01-17-2002, 04:39 PM	#4
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	is your key in the ignition? :P

01-17-2002, 04:42 PM	#5
Infinity_Racer Posts: n/a	ITS SUPPOSE TO BE IN?!?! j/k...yea, i do everything normal...key on the second part, clutch in...everything...man...

01-17-2002, 05:00 PM	#7
Infinity_Racer Posts: n/a	yea i'll re-wire everything in a lil bit...cus i know if i do it now, i mean get soo frustrated i start swinging my bat

01-23-2002, 06:32 PM	#9
james_willson1 Posts: n/a	did you get it figured yet? let me know I do that for work all th etime.

01-23-2002, 11:38 PM	#10
BrandonClaps Posts: n/a	yo, one wire goes from 12v and the other wire goes to your starter wire. Are you sure the wires are connected properly? Do you have the wires backwards? If you need more help explain to me the directionjs and i'll tell ya exactly what to do, but a starter switch is only 1 wires