.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > High Performance > Turbo
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 08-15-2006, 12:34 AM   #1
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
clocking

I just wanted to know when you clock the turbo you are only turning the comp housing side right?I did that to a point to where it could reach my hotpipe but I need to turn the center section aliitle bit so it would be easier for the oil and coolant lines to reach I just wanted to know how would you turn the center section, I just don't want to fuck it up.Any advise would be great
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 08-15-2006, 08:58 AM   #2
JDMFantasy2k
Registered User
 
JDMFantasy2k's Avatar
 
Join Date: Mar 2004
Location: northeastern connecticut
Age: 37
Posts: 1,765
yeah you can clock both sides, and is usually a good idea to do so that way the oil outlet is facing straight down, depending on the manifold you're using.


Just remember when you're clocking loosen the bolts a little and turn slow. There's a gasket (on t3's anyway) between the backing plate and the comp housing and you don't want to wreck it. The turbine side you don't have to worry about except make sure you torque the bolts in sequence so the turbine wheel sits level in the housing. Spin the comp wheel by hand afterward just to be sure nothing is rubbing.
__________________
JDMFantasy2k is offline   Reply With Quote
Old 08-16-2006, 12:40 PM   #3
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
Wd40 Ftw
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Old 08-16-2006, 01:27 PM   #4
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
it has 6 bolts to hold the housing, and a big snap ring also on the cold side. so do i just take the snap ring off and loosen the bolts on each side to turn the center?
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.

Last edited by IALuder : 08-16-2006 at 01:30 PM.
IALuder is offline   Reply With Quote
Old 08-16-2006, 08:08 PM   #5
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
You shouldnt have to take the snap ring off. The snap ring should be for the inner housing.... but then again, it just depends on what turbo
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:25 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com