.:HSTuners::

ebpda9 · 01-24-2002, 05:13 PM

I wanna upgrade my ignition but i have a weird coil. it looks something like in the picture below. What module shall i get. i wanna go MSD all the way. I had in mind the 5 and 6 series ignition control module. i don't wanna spend a lot of money on it, and also i don't want to upgrade the engine further, other than I/H/E

94_AcCoRd_EX · 01-24-2002, 05:30 PM

Where's the pic?

ebpda9 · 01-24-2002, 05:45 PM

here is the pic. it took me a while to figure it out. it had like 1mb

ebpda9 · 01-25-2002, 11:36 AM

anyone ?

01-25-2002, 01:28 PM

MSD is some good ish. I'm gonna put some on my truck eventually...

Anyway, if I knew where the all the wires in that 4 pin connector went to I could help ya out more. But you may want to call them mofo's up and see if the MSD Sport Compact Ignition would work. Summit doesn't have it in their catalog, but Jegs does. The Jegs part # is 121-6300 or with Rev control 121-6320.

If the SCI will not work. You can throw in the MSD Stacker ignition. It just piggybacks the existing ignition and gets you more power out of it. It claims that you "connect it to your vehicle's wiring without disconnecting anything."

ebpda9 · 01-25-2002, 09:46 PM

thanks dave-o for this

01-24-2002, 05:13 PM	#1
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	Ignition setup help I wanna upgrade my ignition but i have a weird coil. it looks something like in the picture below. What module shall i get. i wanna go MSD all the way. I had in mind the 5 and 6 series ignition control module. i don't wanna spend a lot of money on it, and also i don't want to upgrade the engine further, other than I/H/E __________________

01-24-2002, 05:30 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Where's the pic? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

01-25-2002, 11:36 AM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	anyone ? __________________

01-25-2002, 09:46 PM	#6
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	thanks dave-o for this __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-25-2002, 01:28 PM	#5
diligent_dave Posts: n/a	MSD is some good ish. I'm gonna put some on my truck eventually... Anyway, if I knew where the all the wires in that 4 pin connector went to I could help ya out more. But you may want to call them mofo's up and see if the MSD Sport Compact Ignition would work. Summit doesn't have it in their catalog, but Jegs does. The Jegs part # is 121-6300 or with Rev control 121-6320. If the SCI will not work. You can throw in the MSD Stacker ignition. It just piggybacks the existing ignition and gets you more power out of it. It claims that you "connect it to your vehicle's wiring without disconnecting anything."