.:HSTuners::

IALuder · 12-27-2004, 06:05 AM

Is there any way to see if the wg is opening or not? For some reason im not getting any boost and i trouble shoot it to being the wastegate. Is there anyway to see if the spring is working properly?

im working on my friends car. its a turboed laser.

thermal · 12-27-2004, 08:43 PM

in other words, you've checked all the piping for any signs of leakage right? To check the wastegate, move the rod side to side. The only way to acurately check it is to take the whole turbo assembly out and hook up a pressure gauge with pressure source to the diaphragm. Once you do that then observe the gate open as you apply pressure on the diaphragm

IALuder · 12-28-2004, 06:40 AM

thanks! yes we check all lines and pipes.

thermal · 12-28-2004, 09:55 AM

...or it could be that the gate itself is completely worn out.....

IALuder · 12-28-2004, 03:32 PM

thats worse case scenerio.:o

thermal · 12-28-2004, 07:59 PM

IALuder · 01-15-2005, 09:20 AM

well, the fawking thing blew. we replaced it with another one out of a -j-yard.......IT DOESNT WORK EITHER!!!!

thermal · 01-15-2005, 10:02 PM

time to get an external bro...

IALuder · 01-16-2005, 02:20 AM

how hard to switch over? do i need to replace anything else?

i might take the two bad ones apart and see if i cant fix one with the other.

thermal · 01-16-2005, 07:22 AM

it'll take a few hours of fabrication. You will have to find a way to keep the internal gate shut or open if you place the external gate somewhere on the manifold runner/collector

IALuder · 01-16-2005, 07:53 AM

gawd damn. at least its not my car or money.

maybe hell just buy a brand new one.

12-27-2004, 06:05 AM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	wastegate problems agian. Is there any way to see if the wg is opening or not? For some reason im not getting any boost and i trouble shoot it to being the wastegate. Is there anyway to see if the spring is working properly? im working on my friends car. its a turboed laser. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-27-2004, 08:43 PM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	in other words, you've checked all the piping for any signs of leakage right? To check the wastegate, move the rod side to side. The only way to acurately check it is to take the whole turbo assembly out and hook up a pressure gauge with pressure source to the diaphragm. Once you do that then observe the gate open as you apply pressure on the diaphragm __________________ Project Teg Visit the Turbo Forum

12-28-2004, 06:40 AM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	thanks! yes we check all lines and pipes. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-28-2004, 09:55 AM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	...or it could be that the gate itself is completely worn out..... __________________ Project Teg Visit the Turbo Forum

12-28-2004, 03:32 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	thats worse case scenerio.:o __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-28-2004, 07:59 PM	#6
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	yep __________________ Project Teg Visit the Turbo Forum

01-15-2005, 09:20 AM	#7
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well, the fawking thing blew. we replaced it with another one out of a -j-yard.......IT DOESNT WORK EITHER!!!! __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-15-2005, 10:02 PM	#8
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	time to get an external bro... __________________ Project Teg Visit the Turbo Forum

01-16-2005, 02:20 AM	#9
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	how hard to switch over? do i need to replace anything else? i might take the two bad ones apart and see if i cant fix one with the other. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

01-16-2005, 07:22 AM	#10
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	it'll take a few hours of fabrication. You will have to find a way to keep the internal gate shut or open if you place the external gate somewhere on the manifold runner/collector __________________ Project Teg Visit the Turbo Forum

01-16-2005, 07:53 AM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	gawd damn. at least its not my car or money. maybe hell just buy a brand new one. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode