.:HSTuners::

05-29-2002, 08:41 PM

Hi i'm new here, anywhere here is my problem I bought a Ractive Superflow Intake system for a 1996 Honda Accord EX. Here is the problem, for the hood to close I will need to remove a little black box (located on top of the battery) that says "FILTECH INC. Honda>PP~T<" . If I remove the FILTECH, the intake will fit but... there was a little hose that plugged into the FILTECH. Where can I plug the hose, or should I leave it?

Thanks,
John

Accord Man · 05-29-2002, 09:11 PM

to install the intake you have to remove the factory air box (with the big rubber tube attached to it.)

and swap in the new intake..

05-29-2002, 10:35 PM

thanks for the reply. Maybe some pictures will help, use the link below.

Click Here for the Pictures

Accord Man · 05-30-2002, 04:04 PM

humm thats strange.. It wasnt in the way for me, or any of my friends with 5th gen Accords.. And look under my hood tonight and let you know..

promise.

94_AcCoRd_EX · 05-30-2002, 07:47 PM

Hmm... its not a problem on mine. I'll take a look later and see though.

Does this thing look like you could relocate it without too much trouble?

06-06-2002, 03:28 AM

while we're looking under the hoods of our fith gens...could somebody tell me what the hell that black plastic thing is that rests against the battery is. It can be pulled right out and below there is what looks to be an air port (ha airport), so the purpose of the black thingy appears to be to bring air up and direct it at the battery. But what the hell is the purpose of this?!?! I'm sure that batteries do not need to be cooled like this....so what's going on down there?

05-29-2002, 08:41 PM	#1
96accordex Posts: n/a	Help with 1996 Intake Installation Hi i'm new here, anywhere here is my problem I bought a Ractive Superflow Intake system for a 1996 Honda Accord EX. Here is the problem, for the hood to close I will need to remove a little black box (located on top of the battery) that says "FILTECH INC. Honda>PP~T<" . If I remove the FILTECH, the intake will fit but... there was a little hose that plugged into the FILTECH. Where can I plug the hose, or should I leave it? Thanks, John

05-29-2002, 09:11 PM	#2
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	to install the intake you have to remove the factory air box (with the big rubber tube attached to it.) and swap in the new intake.. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

05-30-2002, 04:04 PM	#4
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	humm thats strange.. It wasnt in the way for me, or any of my friends with 5th gen Accords.. And look under my hood tonight and let you know.. promise. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

05-30-2002, 07:47 PM	#5
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Hmm... its not a problem on mine. I'll take a look later and see though. Does this thing look like you could relocate it without too much trouble? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-29-2002, 10:35 PM	#3
96accordex Posts: n/a	thanks for the reply. Maybe some pictures will help, use the link below. Click Here for the Pictures

06-06-2002, 03:28 AM	#6
monkut Posts: n/a	while we're looking under the hoods of our fith gens...could somebody tell me what the hell that black plastic thing is that rests against the battery is. It can be pulled right out and below there is what looks to be an air port (ha airport), so the purpose of the black thingy appears to be to bring air up and direct it at the battery. But what the hell is the purpose of this?!?! I'm sure that batteries do not need to be cooled like this....so what's going on down there?