.:HSTuners::::Hondas Wanted:: |
10-20-2003, 10:18 AM
|
#1 |
|
Posts: n/a
|
Turbo setup
hi guys..
i'm planning to drop a turbo to my car, an EG civic soch Vtec.. i'm looking for a turbo kit and came across the Garrett GT28R turbo. some guys recommend this turbo to me and they say it suits this engine very much.. i'm planning to look for this turbo kit with this turbo.. the only turbo kit i found is the edelbrock kit which cost around $3500.. so i was wondering if there is any other turbo kit around? |
|
|
10-20-2003, 12:25 PM
|
#2 |
|
Yahoo Watashi wa kattaze!
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 40
Posts: 10,579
|
sounds like the edelbrock kit to me...which is really designed for the d16y8 so youd have to use a different fuel management or modify it to fit your eg.
what engine do you have anyways? your sn is b20, your vehicle says c5, and youre talking about a kit for an ek y8 on a z6 eg... |
|
|
|
10-20-2003, 12:30 PM
|
#3 | |
|
Posts: n/a
|
Re: Turbo setup
Quote:
Greddy (15G mitsubishi) turbo kit - 1500$ (shop around, its really that cheap) 1600$ w/intercooler) Apexi turbo kit - the only difference with this kit and the Greddy, is that this one has a much better fuel management system (plus, you can upgrade to an even better one designed for the kit + an intercooler) and the turbo is ball bearing. dont worry about those stupid kits that have a "t3" turbo or bigger, your D16z6 motor wont get that thing fully spooled untill you redline second gear. |
|
|
|
|
10-21-2003, 08:49 PM
|
#4 |
|
4th Gear
Join Date: Oct 2002
Location: Nashville
Age: 37
Posts: 853
|
would a b16 handle the t3 ?
__________________
Doody Ej1 Yse. |
|
|
|
|
10-21-2003, 10:12 PM
|
#5 | |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
Quote:
Easily..... T3 is still tiny bro for your B16A. Go with a T3T04e (make sure to use an "e" trim). |
|
|
|
|
|
10-22-2003, 08:23 AM
|
#6 | |
|
Moderator
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
|
Re: Re: Turbo setup
Quote:
please dont post crap as if its fact when you really have no idea. |
|
|
|
|
|
10-22-2003, 09:59 AM
|
#7 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
yeah man, T3 is a small ass turbo. It also comes in different A/R like most turbos do.....
|
|
|
|
|
10-22-2003, 11:40 AM
|
#8 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
how must boost can a T3/T4 handle?
thats with a full moded engine.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-22-2003, 12:39 PM
|
#9 | |
|
Posts: n/a
|
Re: Re: Re: Turbo setup
Quote:
You are gonna tell me that putting a T3 on a D series motor will give the car good power for a daily driver - you have got to be kidding me. The t3 might be a "small" turbo, but youve got to remember that a D series motor is no beast. You would be happier with a Smaller turbo 15G/16G/18G on a daily driven car. |
|
|
|
|
10-22-2003, 04:17 PM
|
#10 | ||
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
Quote:
Quote:
|
||
|
|
|
|
10-22-2003, 07:10 PM
|
#11 |
|
Posts: n/a
|
True, but - most of the turbo kits that come from Drag/Revhard/F-Max use a t3 that would not work well with a dseries powered car which is also a daily driver.
|
|
|
|
10-22-2003, 08:01 PM
|
#12 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
Dude, all those company uses T3T04 (hybrid)....completely different from a straight T3...... anyway, what are we arguing about? The author of this thread has not responded yet....... I still like your swap tho.......
 |
|
|
|
|
10-22-2003, 09:45 PM
|
#13 | |
|
Posts: n/a
|
Quote:
i didnt think we were arguing (hope i dont sound argumentitive :() Anyways, i though with the revhard/drag kits, you had the option to purchase the kit w/a t3. I will admit that i dont have the turbo knowledge you - can you explain to me what A/R is??? |
|
|
|
|
10-22-2003, 10:14 PM
|
#14 |
|
4th Gear
Join Date: Oct 2002
Location: Nashville
Age: 37
Posts: 853
|
it stands for
B-series kicks ass.
__________________
Doody Ej1 Yse. |
|
|
|
|
10-22-2003, 10:18 PM
|
#15 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
He he he he... you're right. We werent arguing. Those company's sell those kits as is. The only company that offers option is MAXREV. However, their option is only on the trim sizes such as a T3T04e or T3T04b.
Taken from: http://www.hstuners.com/forums/showt...=&threadid=185 A/R -A/R means area/radius. It is a formula to determine the size of the compressor and its turbine-housing configuration. Sounds like a lot but to make it simple, the smaller the A/R the faster your spool up time. But the downside is that the top end will suffer and choke off. If you have a large A/R you will be able to flow more air but you will experience a longer spool up time and poor response also known as turbo lag. peace out cashiz |
|
|
|
|
10-22-2003, 10:21 PM
|
#16 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
yea B-series Kicks major ass.
so at of all turbo companys and turbo setups and stages and crap.... which 3 stand out the most. cost doesnt matter.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-23-2003, 10:28 AM
|
#17 |
|
Posts: n/a
|
sorry for the confusion..
actually i had the C5 already in my EG.. now i'm planning to swap it out for a Sohc Vtec turbo as a daily driven and the C5 is swapped into another car as a race car... maybe a b20 in the future list but surely will go all motor.. i'm planning to run7psi low boost and 10psi high boost when needed.. so i'll get a boost controller when i had my turbo kit.. the question is which turbo kit to go for?apexi? Edelbrock?Greddy? there's too many to choose from... |
|
|
|
10-23-2003, 11:08 AM
|
#18 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
Dude, how much are you willing to put into this? The GReddy kit is cheap but it works. Edelbrock, FMAX, Apex all come with other stuff like intercooler and BOV. Your call bro.......
|
|
|
|
|
10-23-2003, 11:14 AM
|
#19 |
|
Yahoo Watashi wa kattaze!
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 40
Posts: 10,579
|
edelbrock is by far the most complete kit out there and the best for the money. Ive talked about it with people who have it and all I hear is praise. However, it is setup to run @ the 7psi. You can turn up the boost, but it is a little more involved than with some of the other kits.
Saying that also points out that all kits have their problems...there is no perfect kit out there. Some have good this and that and have bad piping, and vise versa. If I were you though, and are just looking for a daily driver w/ some boost, Id concider the greddy kit as its efficient, reliable, and not too expensive (though you do need to add an intercooler separately) |
|
|
|
|
10-23-2003, 11:41 AM
|
#20 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
hmm, i have always been into greddy. so im going greddy.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-23-2003, 12:36 PM
|
#21 |
|
Posts: n/a
|
Thats not a good reason to buy the kit.
You should buy it because its the cheapest kit on the market, and will some minor tinkering (messin with the black box and other stuff) you can get it to do what it does for Thermalfied D16 |
|
|
|
10-23-2003, 12:42 PM
|
#22 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
im not turboing a D16.
i am going to do a B18c5 swap. in the future. so why waste money on a D series motor? ben
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-23-2003, 12:53 PM
|
#23 |
|
Yahoo Watashi wa kattaze!
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 40
Posts: 10,579
|
IMO...you should just leave the c5 as na...to lower the compression for boost you'd just spend more money and lower the low end hp
save your money and get the b18c1 and boost that instead |
|
|
|
|
10-23-2003, 01:00 PM
|
#24 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
170 vs 210....
if i go all motor would the c5 be quicker? becuase turbo and nos are not a big thing to me. so if i go all motor buying jun parts for the c5, i would beat a boosted c1 couldnt i?
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-23-2003, 02:58 PM
|
#25 |
|
Posts: n/a
|
no
|
|
|
|
10-23-2003, 02:59 PM
|
#26 |
|
Posts: n/a
|
The fastest hondas run boosted C1's
|
|
|
|
10-23-2003, 03:24 PM
|
#27 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
turboing a high compression engine takes a lot of research and patience. i do plan to turbo my JDM ITR B18C regardless.
|
|
|
|
|
10-23-2003, 03:33 PM
|
#28 |
|
Yahoo Watashi wa kattaze!
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 40
Posts: 10,579
|
and that, thermal, is why i have such respect for you as a honda driver
|
|
|
|
|
10-23-2003, 07:33 PM
|
#29 |
|
Banning Machine
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
|
Thanks. I know that hondas are lacking in torque and even power.... I've reviewed compressor maps for turbos that will be compatible with my JDM engine. What people do not understand is that, just because the equation fits in, it doesnt mean that the turbo will safely run with the compression rate of the engine. Proper tuning and monitoring devices must still be incorporated and so as decent strenghtening behind the engine block.
 |
|
|
|
|
10-23-2003, 08:12 PM
|
#30 | |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 38
Posts: 1,137
|
Quote:
what's wrong with a boosted d16? you can get a greddy kit for cheap and you'll have a great starting point....upgrading a boosted d16 has nearly endless possibilities...just don't forget to get a turbo timer..
__________________
RICE....is good |
|
|
|
|
|
10-23-2003, 10:15 PM
|
#31 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
i just dont believe a fully mod d motor could even come close to beating a fulling moded B motor.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-23-2003, 10:19 PM
|
#32 |
|
Moderator
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
|
who cares????????????????????
what do you want, a fast car or a "fully modded engine"?? |
|
|
|
|
10-23-2003, 10:34 PM
|
#33 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
a fast fully moded engine.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-24-2003, 10:50 AM
|
#34 |
|
Posts: n/a
|
i'm boostin my D16 cuz i need it as a daily car..
they are just too many turbo cars around my area so it's hard to keep up with them with an all motor car.. so i think a boosted D16 will make them sweat! then my C5 will be used as a race car and i'll be looking for a car to swap it in.. maybe a CRX will be good enuf.. thankz for all those help guys! i appreciate it.. |
|
|
|
10-24-2003, 12:08 PM
|
#35 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
a c5 in a crx? damn thats a lot of work and cash.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-24-2003, 12:16 PM
|
#36 |
|
Moderator
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
|
ever see a h22 in a crx? now thats alot of work!
|
|
|
|
|
10-24-2003, 12:32 PM
|
#37 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
never seen, i live in iowa. hmm nothing really happens here. people just buy body kits and huge spoilers. let alone decails.
decials add lots of HP POWER!! j/p
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
|
10-24-2003, 10:00 PM
|
#38 | |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 38
Posts: 1,137
|
Quote:
your probably 90% right on what you said, but how much is it gonna cost you to have a fully modded boosted B series motor? WAY MORE MONEY compared to a fully modded boosted D series motor. either choice would make any civic fast, and its up to you to decide...though you get more respect for havin' a fast single cam vs a dual cam
__________________
RICE....is good |
|
|
|
|
|
10-25-2003, 09:45 PM
|
#39 |
|
Registered User
Join Date: Jul 2002
Location: ECUSA
Age: 46
Posts: 2,693
|
when you're talking about a "fully modded" engine it doesn't matter really which one it is....
The D series is good to turbo cuz the blocks and STOCK parts are cheap and readilly available... once you're talking about aftermarket parts.... the D series pieces are probobly MORE expensive than B series because they're not as widely used or bought... you can find deals on B series aftermarket rods and pistons because LOTS of dudes buy 80% of what they need for their dream build and then give up or run out of money and sell it for less then they bought it for.... Also when it comes to ALL OUT builds... the series doesn't have ANY effect on the outcome... It's all in the build... sure if you slap pieces A B and C on a D and do the same to a B the B will have more power... but look at bisi's D15... it WAS the fastest all motor civic out there... till he built an F series... now (or at least a couple of months ago) THAT was the fastest civic... so once you delve into built engines there's really no inherent advantage or dis-advantage to a certain motor just because of it's series... Any shortcomings of a SOHC (Seperately tunable exhaust and intake cams) can be COMPLETELY compensated for with a custom desigened cam (1 custom cam can generally be had for not much more (if not less than) a SET of b series cams) Then at that point you actually have an ADVANTAGE being SOHC because there's less weight and less moving parts.
__________________
I am an A$$hole... take anything I say to heart at YOUR OWN RISK... |
|
|
|
|
10-25-2003, 10:42 PM
|
#40 |
|
Registered User
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
|
hmmm... interesting.
i will still got b series tho.
__________________
93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
