.:HSTuners::

*pdiggitydogg* · 10-12-2004, 03:28 PM

Nice weave

And the whole

(Note the pimp In-N-Out placemat I have on the wall...and the old school dreamcast controller from last night's play)

JDMFantasy2k · 10-12-2004, 03:45 PM

what kind, how much, and when are you gonna mount it?

thermal · 10-12-2004, 04:09 PM

When are you gonna save for your turbo pdiggs?... lol jfwy....

*pdiggitydogg* · 10-12-2004, 04:12 PM

its a vis from passwordjdm

This and the lights came out of my engine fund........damn forest cows. Running across the road like crazies...

I have $400 left in my savings now, because of this...so its going to be awhile before I get to do anything fun...AGAIN

sicones · 10-12-2004, 09:05 PM

I can see you in the hood holding the camera

ebpda9 · 10-12-2004, 09:09 PM

looks good

*pdiggitydogg* · 10-13-2004, 02:11 PM

Straight West Coastin'

After the install...I lost my threadlocker somewhere. I still havent found it.

Went on pretty easy actually. I was surprised how little it weighs (should have scaled it).

One of these days Im goin to have to roll up to a body shop and see if they can get the space lessened on the driver side at the fender. (Perma-deer damage)

I still need to put the washer nozzles on. Maybe this weekend...

JDMFantasy2k · 10-13-2004, 02:26 PM

i hate you

looks ludicriously hott man

RxGoaT13 · 10-13-2004, 02:37 PM

Quote:

Originally posted by sicones
I can see you in the hood holding the camera

and a japanese flag

nice ride pdiggs, are you on the west coast?

*pdiggitydogg* · 10-13-2004, 02:51 PM

west coast? no way
Stupid michigan

soundspeed · 10-13-2004, 05:30 PM

Does it have a latch as well, or just the hood pins. Also are the hood pins hard to install my buddy wants to put them on his car. Looks good.

*pdiggitydogg* · 10-13-2004, 07:16 PM

It does have a steel latch...but like I always say "I wouldnt drive around w/ cf hood, and not have any pins"

They were not hard to install IMO. It did take some time, and it is something that you cant screw up too much. I'll write up a how-to for the step-by-step section (damn...I'll have to draw the pictures).
I highly recommend a rotary tool (ie dremel) with a thin grinding-stone bit, over a drill....much more control. I only used a drill for the rivet holes (1/8"), since it would track all over the place w/o a starting hole/divit (something you cant really do on cf/fiberglass)

G-M-W · 10-13-2004, 07:34 PM

bronze hoodpins would look hoooot

*pdiggitydogg* · 10-13-2004, 08:16 PM

I really wanted black...but gunmetal was as close as I could get from a quality pin.

(How-To completed, check Step-By-Step)

JDMFantasy2k · 10-13-2004, 08:30 PM

Quote:

Originally posted by pdiggitydogg in his step by step write up
TIGHTEN YOUR STUD NUTS

hehe stud nuts

*pdiggitydogg* · 10-13-2004, 08:35 PM

I was waiting for something from that...

*KwikR6* · 10-13-2004, 10:18 PM

So yeah Pdigg's...that looks fucking good man!!!!
I'm impressed!!!

*pdiggitydogg* · 10-13-2004, 10:26 PM

Thanks a lot!

ebpda9 · 10-13-2004, 11:08 PM

why not just keep the hood without the pins ?

blind34_1 · 10-13-2004, 11:58 PM

looks great, man.

(not that I would want to see it, but you should've taken the picture naked)

*pdiggitydogg* · 10-14-2004, 12:42 AM

I dont trust any non-oem hood...seen too many pics of them flying up and smashing the windshield and denting roofs.
I play safe.

I really shouldve done that naked...never thought of that. If anything I couldve blurred out my crotch a bit. That wouldve been awesome!

IALuder · 10-14-2004, 07:21 AM

hahahah

nice i like it. the pins are to big for my taste. looks good tho. i hate my pins. but like you said you need them with a CF hood.

*pdiggitydogg* · 10-14-2004, 02:12 PM

theyre really not THAT big
The squiters (which I put in today) are about 1/3 the size of the pin tops

10-12-2004, 03:28 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	CF pics as promised Nice weave And the whole (Note the pimp In-N-Out placemat I have on the wall...and the old school dreamcast controller from last night's play)

10-12-2004, 03:45 PM	#2
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	what kind, how much, and when are you gonna mount it? __________________

10-12-2004, 04:09 PM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	When are you gonna save for your turbo pdiggs?... lol jfwy.... __________________ Project Teg Visit the Turbo Forum

10-12-2004, 09:09 PM	#6
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	looks good __________________

10-13-2004, 02:26 PM	#8
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	i hate you looks ludicriously hott man __________________

10-12-2004, 04:12 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	its a vis from passwordjdm This and the lights came out of my engine fund........damn forest cows. Running across the road like crazies... I have $400 left in my savings now, because of this...so its going to be awhile before I get to do anything fun...AGAIN

10-12-2004, 09:05 PM	#5
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	I can see you in the hood holding the camera

10-13-2004, 02:11 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Straight West Coastin' After the install...I lost my threadlocker somewhere. I still havent found it. Went on pretty easy actually. I was surprised how little it weighs (should have scaled it). One of these days Im goin to have to roll up to a body shop and see if they can get the space lessened on the driver side at the fender. (Perma-deer damage) I still need to put the washer nozzles on. Maybe this weekend...

10-13-2004, 02:51 PM	#10
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	west coast? no way Stupid michigan

10-13-2004, 05:30 PM	#11
soundspeed Registered User Join Date: May 2003 Location: Toronto Age: 45 Posts: 336	Does it have a latch as well, or just the hood pins. Also are the hood pins hard to install my buddy wants to put them on his car. Looks good. __________________ Surgeon General Says: It's Okay To Smoke V8's The Only Replacement For Displacement...Is Technology

10-13-2004, 07:16 PM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	It does have a steel latch...but like I always say "I wouldnt drive around w/ cf hood, and not have any pins" They were not hard to install IMO. It did take some time, and it is something that you cant screw up too much. I'll write up a how-to for the step-by-step section (damn...I'll have to draw the pictures). I highly recommend a rotary tool (ie dremel) with a thin grinding-stone bit, over a drill....much more control. I only used a drill for the rivet holes (1/8"), since it would track all over the place w/o a starting hole/divit (something you cant really do on cf/fiberglass)

10-13-2004, 07:34 PM	#13
G-M-W 2nd Gear Join Date: Mar 2003 Location: Akron, OH Age: 40 Posts: 254	bronze hoodpins would look hoooot

10-13-2004, 08:16 PM	#14
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	I really wanted black...but gunmetal was as close as I could get from a quality pin. (How-To completed, check Step-By-Step)

10-13-2004, 08:35 PM	#16
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	I was waiting for something from that...

10-13-2004, 10:18 PM	#17
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	So yeah Pdigg's...that looks fucking good man!!!! I'm impressed!!! __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

10-13-2004, 10:26 PM	#18
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Thanks a lot!

10-13-2004, 11:08 PM	#19
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	why not just keep the hood without the pins ? __________________

10-13-2004, 11:58 PM	#20
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 39 Posts: 1,813	looks great, man. (not that I would want to see it, but you should've taken the picture naked)

10-14-2004, 12:42 AM	#21
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	I dont trust any non-oem hood...seen too many pics of them flying up and smashing the windshield and denting roofs. I play safe. I really shouldve done that naked...never thought of that. If anything I couldve blurred out my crotch a bit. That wouldve been awesome!

10-14-2004, 07:21 AM	#22
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	hahahah nice i like it. the pins are to big for my taste. looks good tho. i hate my pins. but like you said you need them with a CF hood. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

10-14-2004, 02:12 PM	#23
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	theyre really not THAT big The squiters (which I put in today) are about 1/3 the size of the pin tops

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode