.:HSTuners::

*pdiggitydogg* · 10-06-2004, 03:45 PM

Did you know that integra front calipers bolt directly up to 92-00 civic ex and 99-00 si? (You will need 15" wheels...Im lucky and my old 14" barely clear - by less than 1cm.)

Did you know that all civic/integra/del sol rear disc's bolt up to all civics/del sols?

Did you know that Del Sol Vtec's have 1/2 length dual core radiators? (Its a good upgrade from the stock civic one... $100 at most auto parts stores.)

Did you know that changing your o2 sensor can improve mpg? (Do it right, get denso first-time-fit or oem)

Did you know that the 92-95 stock civic vx had an air diffuser for the rear bumper? (It really helps minimize drag.)

Did you know that you can calculate compression for a Bseries engine here: http://www.c-speedracing.com/howto/c...c/compcalc.php

Did you know that factory Del Sol seats were designed by Recaro?

Did you know that the b20a, in the older preludes, is the only Bseries that doesnt share the same parts as the other Bseries?

Did you know that JDM itr's have 36mm axles, instead of 32mm?

Did you know that 6th gen coupes and sedans have the same rear bumper, but all 96-98 and 99-00 are different?

Did you know that this thread was stupid, but we need to get this place going again?

What good 'Did you knows' do you have?

sicones · 10-06-2004, 05:34 PM

are the front calipers from the integra 2 piston if not who gives a crap

*AzCivic* · 10-06-2004, 05:35 PM

did you know that using less anti-freeze and more water in your coolant mix will keep the engine cooler?

thermal · 10-06-2004, 05:43 PM

nice man. I'll post some "did you knows" later

*pdiggitydogg* · 10-06-2004, 07:15 PM

Quote:

Originally posted by sicones
are the front calipers from the integra 2 piston if not who gives a crap

the piston size is noticeably larger on integra calipers...it makes a big difference...trust me

JDMFantasy2k · 10-06-2004, 07:53 PM

that's a pretty sick idea. So in theory...

i could go to the junkyard and grab the front calipers off any teg...

then buy larger brake rotors for a civic,

and hope to hell they work and with a little luck, i could have better braking performance for under 2 bills....

*pdiggitydogg* · 10-06-2004, 08:11 PM

not ANY integra, 94+.
Integras, civic ex/si (minus eh3) and del sel si/vtec all have the same rotors.

If you choose to do it, I HIGHLY recommend a larger brake master cylinder and booster. I have a 1" (itr) and it feels like my old stock ex brakes w/ drums (I wonder how soft it gets w/ itr calipers)
You can get a 1" unit from passwordjdm for under $100; 15/16ths for even less.

Should I have done a how-to?

JDMFantasy2k · 10-06-2004, 08:14 PM

yeah i'd like to have a brake setup just like yours but i don't know if i'm capable of installing the booster/MC....

*pdiggitydogg* · 10-06-2004, 08:20 PM

did you check out my how-to?
its fairly simple. Id rate it a 2/5. Installing springs and shocks is harder.
The hard thing about it is getting the hard lines to line up...its tedious. As long as you get a GOOD line-wrech for the lines, its simple as long as you follow what I did.

JDMFantasy2k · 10-06-2004, 08:52 PM

yeah it seems like a feasible project....

found the booster/mc for 69 bucks, so this may turn into a winter project...

*pdiggitydogg* · 10-06-2004, 09:36 PM

just know, that some units requre you to reflare the line, because SOME abs lines are larger than others
Dont ask me why...

*pdiggitydogg* · 10-08-2004, 10:24 AM

ok ok
back on track

"Did you know______"

*pdiggitydogg* · 10-09-2004, 08:15 PM

fine turd heads...

Did you know that if youre building a b20b/z motor you need custom pistons because its the only 84mm honda bore? (So no ctr pistons)

Did you know that you can get filter screens for your oil filters? (Much easier to look at that than cut the filter open)

Did you know that honda's new oem coolant is blue and comes pre-mixed 50/50?

Did you know that you can install an integra ls 5th gear set onto a b16 or gsr tranny to make it longer for highway cruising and better mpg?

Did you know that you can just put your stereo in the lower din of any 96-98 civic? 99-00 cannot.

Did you know that there were NO factory white civic hatches 96-98?

Did you know that strut bars w/ hinges/pivot points do almost absolutely jack shit? You need a solid bar - 3pt is best.

Did you know that the b16b is really a b18c R block w/ a b16 crank? It really is a destroked b18c R....really really.

Did you know that all Kseries have some form of vtec? You dont have to do ls/vtec anymore...you just swap the head of a rsx-s onto it and BAM better ivtec in your crv. The TSX also has the good ivtec and its 2.4L...yummy
Did you know that the new type r integra and civic share the same k20a?
Did you know that the base rsx and new civic si share the same engine?

Theres some Kseries facts for you

MissJDM · 10-09-2004, 08:58 PM

Did you know that ^^^ likes to be called PAT? Not Pat, but PAT.

Oh yeah, I knew 4 out of the 9 on the previous one. Damn.

*pdiggitydogg* · 10-09-2004, 09:51 PM

Yes, you have to write in in all caps because it stands for Perfectly Awesome...."T"
or
It just has to be yelled

Did you know that almost all of Spoon's products are actually made by some other company and then sold by spoon with a price hike? Those same products, from the manufacturer, are still sold, badged as non-spoon, for lower prices.

Spoon bars have pivot points - you know that that means

RxGoaT13 · 10-09-2004, 10:54 PM

hey pdiggs,what bar do you recomend?

*pdiggitydogg* · 10-09-2004, 11:02 PM

OEM gsr/civic si is a fine bar that you can usually get for under $40.
There are also good mugen knock-off bars on ebay for around $50. Just look for ones with NO hinges - IE http://cgi.ebay.com/ebaymotors/ws/eB...tego ry=33591

A carbing 3pt bar (or similar) is going to be the best since it also attaches to the firewall. They are expensive though...and not really worth it IMO
http://www.rcdevelopments.com/manufa...ing-3point.jpg

Strut bars dont really do that much...dont shell out big bucks. A large diameter rear sway and subframe reinforcement combo will work wonders for handling.

ebpda9 · 10-09-2004, 11:20 PM

Quote:

Originally posted by pdiggitydogg
[b]

A carbing 3pt bar (or similar) is going to be the best since it also attaches to the firewall. They are expensive though...and not really worth it IMO
http://www.rcdevelopments.com/manufa...ing-3point.jpg[b]

i really think those are crap since the firewall is just some sheetmetal. look at your video that you posted for the brake mc brace and see how much the firewall moves.

*pdiggitydogg* · 10-09-2004, 11:31 PM

well its not really the firewall, its the frame around it that gets the brace's 3rd point

*ChrisCantSkate* · 10-10-2004, 12:08 AM

did you know that 2 piston nsx and 4 door legend(95+ i believe) calipers bolt onto preludes. im pretty sure one of the legends pistons is bigger than the nsx's also.

*pdiggitydogg* · 10-10-2004, 12:22 AM

^those also bolt onto civic ex/si and integras. But the prelude vtec rotor needs to be redrilled to 4x100 to utilize it best.
AND a spacer must be used on both sides of the rotor, or it wont clear the caliper.
Can be done though

10-06-2004, 03:45 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Did you know Did you know that integra front calipers bolt directly up to 92-00 civic ex and 99-00 si? (You will need 15" wheels...Im lucky and my old 14" barely clear - by less than 1cm.) Did you know that all civic/integra/del sol rear disc's bolt up to all civics/del sols? Did you know that Del Sol Vtec's have 1/2 length dual core radiators? (Its a good upgrade from the stock civic one... $100 at most auto parts stores.) Did you know that changing your o2 sensor can improve mpg? (Do it right, get denso first-time-fit or oem) Did you know that the 92-95 stock civic vx had an air diffuser for the rear bumper? (It really helps minimize drag.) Did you know that you can calculate compression for a Bseries engine here: http://www.c-speedracing.com/howto/c...c/compcalc.php Did you know that factory Del Sol seats were designed by Recaro? Did you know that the b20a, in the older preludes, is the only Bseries that doesnt share the same parts as the other Bseries? Did you know that JDM itr's have 36mm axles, instead of 32mm? Did you know that 6th gen coupes and sedans have the same rear bumper, but all 96-98 and 99-00 are different? Did you know that this thread was stupid, but we need to get this place going again? What good 'Did you knows' do you have?

10-06-2004, 05:43 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	nice man. I'll post some "did you knows" later __________________ Project Teg Visit the Turbo Forum

10-06-2004, 07:53 PM	#6
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	that's a pretty sick idea. So in theory... i could go to the junkyard and grab the front calipers off any teg... then buy larger brake rotors for a civic, and hope to hell they work and with a little luck, i could have better braking performance for under 2 bills.... __________________

10-06-2004, 08:14 PM	#8
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	yeah i'd like to have a brake setup just like yours but i don't know if i'm capable of installing the booster/MC.... __________________

10-06-2004, 08:52 PM	#10
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	yeah it seems like a feasible project.... found the booster/mc for 69 bucks, so this may turn into a winter project... __________________

10-06-2004, 05:34 PM	#2
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	are the front calipers from the integra 2 piston if not who gives a crap

10-06-2004, 05:35 PM	#3
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	did you know that using less anti-freeze and more water in your coolant mix will keep the engine cooler?

10-06-2004, 08:11 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	not ANY integra, 94+. Integras, civic ex/si (minus eh3) and del sel si/vtec all have the same rotors. If you choose to do it, I HIGHLY recommend a larger brake master cylinder and booster. I have a 1" (itr) and it feels like my old stock ex brakes w/ drums (I wonder how soft it gets w/ itr calipers) You can get a 1" unit from passwordjdm for under $100; 15/16ths for even less. Should I have done a how-to?

10-06-2004, 08:20 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	did you check out my how-to? its fairly simple. Id rate it a 2/5. Installing springs and shocks is harder. The hard thing about it is getting the hard lines to line up...its tedious. As long as you get a GOOD line-wrech for the lines, its simple as long as you follow what I did.

10-06-2004, 09:36 PM	#11
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	just know, that some units requre you to reflare the line, because SOME abs lines are larger than others Dont ask me why...

10-08-2004, 10:24 AM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	ok ok back on track "Did you know______"

10-09-2004, 08:15 PM	#13
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	fine turd heads... Did you know that if youre building a b20b/z motor you need custom pistons because its the only 84mm honda bore? (So no ctr pistons) Did you know that you can get filter screens for your oil filters? (Much easier to look at that than cut the filter open) Did you know that honda's new oem coolant is blue and comes pre-mixed 50/50? Did you know that you can install an integra ls 5th gear set onto a b16 or gsr tranny to make it longer for highway cruising and better mpg? Did you know that you can just put your stereo in the lower din of any 96-98 civic? 99-00 cannot. Did you know that there were NO factory white civic hatches 96-98? Did you know that strut bars w/ hinges/pivot points do almost absolutely jack shit? You need a solid bar - 3pt is best. Did you know that the b16b is really a b18c R block w/ a b16 crank? It really is a destroked b18c R....really really. Did you know that all Kseries have some form of vtec? You dont have to do ls/vtec anymore...you just swap the head of a rsx-s onto it and BAM better ivtec in your crv. The TSX also has the good ivtec and its 2.4L...yummy Did you know that the new type r integra and civic share the same k20a? Did you know that the base rsx and new civic si share the same engine? Theres some Kseries facts for you

10-09-2004, 08:58 PM	#14
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 37 Posts: 2,244	Did you know that ^^^ likes to be called PAT? Not Pat, but PAT. Oh yeah, I knew 4 out of the 9 on the previous one. Damn. __________________ you say it best when you say nothing at all

10-09-2004, 09:51 PM	#15
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Yes, you have to write in in all caps because it stands for Perfectly Awesome...."T" or It just has to be yelled Did you know that almost all of Spoon's products are actually made by some other company and then sold by spoon with a price hike? Those same products, from the manufacturer, are still sold, badged as non-spoon, for lower prices. Spoon bars have pivot points - you know that that means

10-09-2004, 10:54 PM	#16
RxGoaT13 4th Gear Join Date: Apr 2004 Location: Modesto, CA Posts: 801	hey pdiggs,what bar do you recomend? __________________ http://www.myspace.com/rxgoat13

10-09-2004, 11:02 PM	#17
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	OEM gsr/civic si is a fine bar that you can usually get for under $40. There are also good mugen knock-off bars on ebay for around $50. Just look for ones with NO hinges - IE http://cgi.ebay.com/ebaymotors/ws/eB...tego ry=33591 A carbing 3pt bar (or similar) is going to be the best since it also attaches to the firewall. They are expensive though...and not really worth it IMO http://www.rcdevelopments.com/manufa...ing-3point.jpg Strut bars dont really do that much...dont shell out big bucks. A large diameter rear sway and subframe reinforcement combo will work wonders for handling.

10-09-2004, 11:31 PM	#19
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	well its not really the firewall, its the frame around it that gets the brace's 3rd point

10-10-2004, 12:08 AM	#20
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	did you know that 2 piston nsx and 4 door legend(95+ i believe) calipers bolt onto preludes. im pretty sure one of the legends pistons is bigger than the nsx's also. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

10-10-2004, 12:22 AM	#21
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	^those also bolt onto civic ex/si and integras. But the prelude vtec rotor needs to be redrilled to 4x100 to utilize it best. AND a spacer must be used on both sides of the rotor, or it wont clear the caliper. Can be done though

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode