.:HSTuners::

03-04-2002, 01:34 AM

I finally installed these pedals

they look good and feel great
i am so happy

94_AcCoRd_EX · 03-04-2002, 02:18 AM

Looks great. I'm glad you got everything figured out.

*KwikR6* · 03-04-2002, 01:31 PM

Hey those do look alright....I would buy a set if I wasn't selling my car.

94_AcCoRd_EX · 03-04-2002, 01:52 PM

Quick question: How do they feel when driving? Also, I thought they'd be a little closer together so you can heel-toe easier. What are your overall impressions of them?

ebpda9 · 03-04-2002, 11:20 PM

you need to vacuum in that car

jfwy

03-05-2002, 01:06 AM

i am so happy with them.
You are right about the heel toe
However later on i will probably move the accelerator closer to the break. that will probably make it an inch closes

94_AcCoRd_EX · 03-05-2002, 01:22 AM

So the position just depends on where you drill the holes? How would you move them?

03-05-2002, 07:49 AM

drill the holes? u had to drill holes into your stock pedals? Through the metal? How hard was it to get thru? I wanna see how close u can get it cause i wanna be able to heel toe

03-05-2002, 07:53 AM

oh wait i saw in your other post u had to weld the accel pedal on? Yucky i don't wanna do that! ;[

03-05-2002, 11:38 PM

no!! i didn't have to get it welded!!!!
I used self tappers in the accelerator instead.
It is not so difficult to drill through the metel, it is just getting down their to do it.
You can move the pedals as close as u want, however it u do it to close then you will see the old stock plates around the edge.

i ended up pulling the bottom part of the dash of to get more room. another alternative is to take out the seat!!!

you have got to get some they are worth it and are great!!!!!!

03-06-2002, 08:59 AM

how well did the screws go in? and how well does it hold up?

03-07-2002, 12:32 AM

i have absolutely no problems, i thaught they may fall off but they are just as strong as the bolted on ones!!

03-10-2002, 05:52 PM

The Japanese Honda Civic Type-R brake and gas pedals are 60mm appart from edge to edge, my momo pedals are 63 to 64mm appart. so they are set up for some nice heel toe action!!

03-10-2002, 08:32 PM

they are as good as the bolted ones? what you mean bolted?

03-12-2002, 07:53 PM

man, i'd rather get some cheap ones that just kinda buckle or attach themselves on, i dont like the idea of drilling any holes in my car, whatsoever

03-12-2002, 11:26 PM

you drill through the pedal

you place the momo pedal on top

you shove the screw through the pedal the the hole

You get the nut and tighten it.

the brake and clutch are like that and the acclerator is selftapped in. They are all bloody strong.

03-31-2002, 01:14 PM

hey.. quick question..

how do pedals affect driving? is it just the feel?

04-01-2002, 06:02 AM

yes, for me its just the feel, but the feel great!

the advantage with them is that if you want, and i did, the pedals ended up closer together.

03-04-2002, 02:18 AM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Looks great. I'm glad you got everything figured out. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

03-04-2002, 01:31 PM	#3
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Hey those do look alright....I would buy a set if I wasn't selling my car. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

03-04-2002, 01:52 PM	#4
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Quick question: How do they feel when driving? Also, I thought they'd be a little closer together so you can heel-toe easier. What are your overall impressions of them? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

03-04-2002, 11:20 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	you need to vacuum in that car jfwy __________________

03-05-2002, 01:22 AM	#7
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	So the position just depends on where you drill the holes? How would you move them? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

03-05-2002, 01:06 AM	#6
SlikVic Posts: n/a	i am so happy with them. You are right about the heel toe However later on i will probably move the accelerator closer to the break. that will probably make it an inch closes

03-05-2002, 07:49 AM	#8
BrandonClaps Posts: n/a	drill the holes? u had to drill holes into your stock pedals? Through the metal? How hard was it to get thru? I wanna see how close u can get it cause i wanna be able to heel toe

03-05-2002, 07:53 AM	#9
BrandonClaps Posts: n/a	oh wait i saw in your other post u had to weld the accel pedal on? Yucky i don't wanna do that! ;[

03-05-2002, 11:38 PM	#10
SlikVic Posts: n/a	no!! i didn't have to get it welded!!!! I used self tappers in the accelerator instead. It is not so difficult to drill through the metel, it is just getting down their to do it. You can move the pedals as close as u want, however it u do it to close then you will see the old stock plates around the edge. i ended up pulling the bottom part of the dash of to get more room. another alternative is to take out the seat!!! you have got to get some they are worth it and are great!!!!!!

03-06-2002, 08:59 AM	#11
BrandonClaps Posts: n/a	how well did the screws go in? and how well does it hold up?

03-07-2002, 12:32 AM	#12
SlikVic Posts: n/a	i have absolutely no problems, i thaught they may fall off but they are just as strong as the bolted on ones!!

03-10-2002, 05:52 PM	#13
SlikVic Posts: n/a	The Japanese Honda Civic Type-R brake and gas pedals are 60mm appart from edge to edge, my momo pedals are 63 to 64mm appart. so they are set up for some nice heel toe action!!

03-10-2002, 08:32 PM	#14
BrandonClaps Posts: n/a	they are as good as the bolted ones? what you mean bolted?

03-12-2002, 07:53 PM	#15
Azkikr111 Posts: n/a	man, i'd rather get some cheap ones that just kinda buckle or attach themselves on, i dont like the idea of drilling any holes in my car, whatsoever

03-12-2002, 11:26 PM	#16
SlikVic Posts: n/a	you drill through the pedal you place the momo pedal on top you shove the screw through the pedal the the hole You get the nut and tighten it. the brake and clutch are like that and the acclerator is selftapped in. They are all bloody strong.

03-31-2002, 01:14 PM	#17
gee Posts: n/a	hey.. quick question.. how do pedals affect driving? is it just the feel?

04-01-2002, 06:02 AM	#18
SlikVic Posts: n/a	yes, for me its just the feel, but the feel great! the advantage with them is that if you want, and i did, the pedals ended up closer together.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode