.:HSTuners::

01-06-2003, 10:34 PM

I know other people have asked but i cant find any previous threads involving my question. What exactly is involved in shaving the back H emblem, civic emblem, all that good stuff that leaves holes. I know its a small step but nothing big till the swap.
thnx guys

sohc_vtec 2NR · 01-23-2003, 07:29 PM

for the "civic" and the trim line emblems (ex/dx...) i believe you can remove it by heating the emblem with a hair dryer and then carefully run floss under the emblem...then use some goo gone to remove excess adhesive...don't forget to was the part you used goo gone one...because it will be dull

i wouldn't recommend taking out the "H" emblem because i've read that there are holes behind it...unless u have the money to have it "professionally shaved"...

01-23-2003, 09:08 PM

to shave the H you have to fill in the holes, tack weld a drop in there and grind any excess and then bondo. Oh yeah, then repaint.

blind34_1 · 01-24-2003, 09:55 AM

shaving cream and a good quality razor. aftershave if you wanna get fancy...

*pdiggitydogg* · 01-30-2003, 08:51 PM

leave the H on...sure wish i did....

01-30-2003, 11:43 PM

Quote:

Originally posted by pdiggitydogg
leave the H on...sure wish i did....

why do you wish you did?

01-31-2003, 12:07 AM

Quote:

Originally posted by blind34_1
shaving cream and a good quality razor. aftershave if you wanna get fancy...

haha... your real smart

01-06-2003, 10:34 PM	#1
Civicfrenzy Posts: n/a	shaving emblems I know other people have asked but i cant find any previous threads involving my question. What exactly is involved in shaving the back H emblem, civic emblem, all that good stuff that leaves holes. I know its a small step but nothing big till the swap. thnx guys

01-23-2003, 07:29 PM	#2
sohc_vtec 2NR Registered User Join Date: Dec 2002 Location: Kenosha, WI Age: 38 Posts: 1,137	for the "civic" and the trim line emblems (ex/dx...) i believe you can remove it by heating the emblem with a hair dryer and then carefully run floss under the emblem...then use some goo gone to remove excess adhesive...don't forget to was the part you used goo gone one...because it will be dull i wouldn't recommend taking out the "H" emblem because i've read that there are holes behind it...unless u have the money to have it "professionally shaved"... __________________ RICE....is good

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-23-2003, 09:08 PM	#3
myself_included Posts: n/a	to shave the H you have to fill in the holes, tack weld a drop in there and grind any excess and then bondo. Oh yeah, then repaint.

01-24-2003, 09:55 AM	#4
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 39 Posts: 1,813	shaving cream and a good quality razor. aftershave if you wanna get fancy...

01-30-2003, 08:51 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	leave the H on...sure wish i did....