.:HSTuners::

05-20-2003, 07:02 PM

Hey guy's/girl's,

New to the forum and I like this forum. I have a USDM 5spd Honda Prelude 98 and I'm going to do a swap with a JDM engine. I'm going all JDM, I already have painted the car JDM Hyper White, and i/h/e, cams all JDM. I was just wondering if I would run into any problems while swapping out the old USDM engine and adding in the JDM engine. Help would be appreciated.

Thanks,
Allan

ebpda9 · 05-20-2003, 10:08 PM

well first of all i think the swap is not necesarry because of the little difference in power but if u decide to do it i want your engine

*ChrisCantSkate* · 05-25-2003, 12:02 AM

well.. the jdm engine harnesses are obd1 and your car is odb2 (On Board Diognostics) your going to have to swap the main harness, but the motor will bolt up.

and i think its worth it. its a minor gain on paper... but its a stronger engine.

05-25-2003, 10:41 AM

Ya that's kinda of why i was going for it, not too much of gains in hp (5) but it's also stronger. Anyways the USDM is about to reach to where i was going for a new engine.

05-26-2003, 07:33 PM

If you get an OBD1 engine and want to use your OBD2 ECU, you have to rewire the harness from withing the engine compartment to run the Engine. It is that simple.

If you want to use an OBD1 ECU, make sure you get an OBD1 harness with your engine. Then you have to interface (rewire) the OBD1 harness to the car's harness.

Once you have changed the ECU, it won't have the security that your Lude has. Meaning the starter disable feature of your key would not work anymore.

ebpda9 · 05-26-2003, 07:41 PM

yeah i have the skunk 2 harness adaptors from obd2 to obd1. they don't run that much

pimpinprelude · 05-27-2003, 05:37 PM

well if u swap it, send me your old useless piece of junk engine........ill take care of it

05-20-2003, 07:02 PM	#1
5GLude98 Posts: n/a	USDM To JDM Swap Hey guy's/girl's, New to the forum and I like this forum. I have a USDM 5spd Honda Prelude 98 and I'm going to do a swap with a JDM engine. I'm going all JDM, I already have painted the car JDM Hyper White, and i/h/e, cams all JDM. I was just wondering if I would run into any problems while swapping out the old USDM engine and adding in the JDM engine. Help would be appreciated. Thanks, Allan

05-20-2003, 10:08 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	well first of all i think the swap is not necesarry because of the little difference in power but if u decide to do it i want your engine __________________

05-25-2003, 12:02 AM	#3
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	well.. the jdm engine harnesses are obd1 and your car is odb2 (On Board Diognostics) your going to have to swap the main harness, but the motor will bolt up. and i think its worth it. its a minor gain on paper... but its a stronger engine. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

05-26-2003, 07:41 PM	#6
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	yeah i have the skunk 2 harness adaptors from obd2 to obd1. they don't run that much __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-25-2003, 10:41 AM	#4
5GLude98 Posts: n/a	Ya that's kinda of why i was going for it, not too much of gains in hp (5) but it's also stronger. Anyways the USDM is about to reach to where i was going for a new engine.

05-26-2003, 07:33 PM	#5
92h22a4 Posts: n/a	If you get an OBD1 engine and want to use your OBD2 ECU, you have to rewire the harness from withing the engine compartment to run the Engine. It is that simple. If you want to use an OBD1 ECU, make sure you get an OBD1 harness with your engine. Then you have to interface (rewire) the OBD1 harness to the car's harness. Once you have changed the ECU, it won't have the security that your Lude has. Meaning the starter disable feature of your key would not work anymore.

05-27-2003, 05:37 PM	#7
pimpinprelude Registered User Join Date: Mar 2003 Location: Atlanta Age: 36 Posts: 1,325	well if u swap it, send me your old useless piece of junk engine........ill take care of it