.:HSTuners::

thermal · 10-02-2005, 07:25 PM

installed. Scavenge system ready to go

thermal · 10-02-2005, 07:25 PM

DP and DT wrapped

thermal · 10-02-2005, 07:27 PM

my civic

thermal · 10-02-2005, 07:29 PM

This is Dameon aka D-tuned wiring up my Ignition System (MSD blaster SS amplified by AEM C2Di.

thermal · 10-02-2005, 07:37 PM

Jic Magic strut bar. From the pix, it looks like not a whole lot was done today, but trust me, I busted my ass all day.

I finished the downpipe. I welded the E-cut, O2 bung, bracket, and scavenge tube. I also painted it with high temp ceramic-base paint.

The ignition system is complete, thanks to D-tuned.

I hooked up and lock-wired all the vacuum lines for the BOV, boost controller solenoid, boost gauge, WG, FPR, and 3 bar map sensor.

I ran and hooked up the solenoid for the N2O intercooler spray.

I fabricated all kinds of stuff like hose brackets and blasterSS bracket.

I repaintd my calipers black.

more shit to follow. I'm out to sea again for a few days. Once I get back, I should be ready to fire this baby up and ready for dyno tuning.

AkimboStylee · 10-02-2005, 08:35 PM

DAMN is all i can say! a thing of beauty!

JDMFantasy2k · 10-02-2005, 09:23 PM

when did you get new wheels for the civic? And why'd you ditch teh mr7's?? Also how's that B20 holdin up?

I assume the scavange system is for the PCV system? Looking good man, time to call up honda tuning

thermal · 10-02-2005, 11:10 PM

Quote:

Originally posted by AkimboStylee
DAMN is all i can say! a thing of beauty!

thanks

thermal · 10-02-2005, 11:18 PM

Quote:

Originally posted by JDMFantasy2k
when did you get new wheels for the civic? And why'd you ditch teh mr7's?? Also how's that B20 holdin up?

I assume the scavange system is for the PCV system? Looking good man, time to call up honda tuning

Those MR7 has been long gone a winter and a half ago. They are too heavy. Those Rota Slips are from my teg. I have TE37's now for the TEG. The B20 is too slow for me...........

Yep, PCV........

JDMFantasy2k · 10-03-2005, 09:12 PM

can't beat boost...

thermal · 10-03-2005, 11:58 PM

yep.

This just always happens to me. Each time I get close to completing something, I get pulled off to go out to sea.....

BlackEJ · 10-04-2005, 08:17 PM

Quote:

Originally posted by thermal
Those MR7 has been long gone a winter and a half ago. They are too heavy. Those Rota Slips are from my teg. I have TE37's now for the TEG. The B20 is too slow for me...........

Yep, PCV........

Damn Arnel I didn't know you had some focking Volks for the teggy, btw what color are they?

Mischief · 10-04-2005, 10:34 PM

volks make such sexy wheels, I'm jealous.

*ChrisCantSkate* · 10-04-2005, 11:41 PM

i cant get enough of your car man... i love the manifold in there

thermal · 10-05-2005, 09:17 PM

Quote:

Originally posted by BlackEJ
Damn Arnel I didn't know you had some focking Volks for the teggy, btw what color are they?

I forgot to show you at the crib bro. I have it on my patio collecting dust. Gunmetal.....

BlackEJ · 10-07-2005, 11:02 PM

Quote:

Originally posted by thermal
I forgot to show you at the crib bro. I have it on my patio collecting dust. Gunmetal.....

I'll take a look at them when you get back from out to sea!!!!

thermal · 10-08-2005, 08:22 PM

I'm back focker. I was in Richmond. Hit me up monday and let me see that new ride!

BlackEJ · 10-08-2005, 10:58 PM

Quote:

Originally posted by thermal
I'm back focker. I was in Richmond. Hit me up monday and let me see that new ride!

WORD!!

thermal · 10-09-2005, 06:30 AM

Monday (10OCT) will be a big day. I'm gonna start the car. Keeping my fingers crossed

I have a couple more items to get but not related to the turbo set-up. I'm eyeballing some titanium traction bar and EDM ITR black interior. I plan to get the roll cage done in March/April time frame. By then, I need to have all my interior conversion done.

BlackEJ · 10-09-2005, 03:06 PM

Quote:

Originally posted by thermal
Monday (10OCT) will be a big day. I'm gonna start the car. Keeping my fingers crossed

I have a couple more items to get but not related to the turbo set-up. I'm eyeballing some titanium traction bar and EDM ITR black interior. I plan to get the roll cage done in March/April time frame. By then, I need to have all my interior conversion done.

What time focker?
I gotta be there to see teh teggy start up!!!!!

thermal · 10-09-2005, 04:15 PM

around noon mang

thermal · 10-10-2005, 10:34 PM

Well, sometimes plans just dont come together. Today was supposed to be easy. It turned out that I had to do more. I forgot to even include installing my rear disc brakes but that is done now. I also had to pull off the turbo timer and the boost controller out of my civic and get it moved into my Teg. The interior is a big mess but I can fix that later.

I attempted to start the car. I couldnt get it to crank at first. I looked around and found that my fuel pump wasnt even plugged in. It still wouldnt crank. Then I looked around again and found that one of the ground wire wasnt connected. Then I got it to crank... but it wouldnt start. Now, I'm thinking that the MSD and C2Di combo might be the issue. I was too tired to rewire it back to stock nor even mess with the MSD and plug spark. I'll wait till tomorrow for D-tuned to decipher the issue.

I also score a Sparco Torino from BlackEJ. Thanks bro.

For now, here's a picture. Looks like nothing major was done, but believe it or not, I worked all day for this:

thermal · 10-10-2005, 10:37 PM

thermal · 10-14-2005, 05:11 PM

.... got the car running. The idle is crap since I only have the base Hondata map. I know that my timing is really off too. The car looks awesome!

However I have another problem. My brake system is jacked up for some reason. I bled the crap out of it already. I noticed this problem before the I tore apart my Teg but it was to a minimum. I overhauled my brake system already. I changed all the rubber lines with steel braded, replaced the rotors, and replaced the booster. Could it be that the ABS system needs to be looked at? I'm going to bleed it off some more. The system was "open" for a long time anyway while I was upgrading the rotors and lines.

thermal · 10-14-2005, 05:12 PM

thermal · 10-14-2005, 05:16 PM

my oil filter. the one on the right

thermal · 10-14-2005, 07:42 PM

havent even washed the car yet

thermal · 10-14-2005, 07:45 PM

too low

thermal · 10-14-2005, 07:46 PM

... and another

thermal · 10-14-2005, 07:47 PM

the JIC magic rear strut bar

thermal · 10-14-2005, 07:48 PM

Rain................

BlackEJ · 10-14-2005, 11:47 PM

Damn bro that bish is focking low as hell, but hey them Volks make up for it.
Looking good bro.

dabouncerx24 · 10-15-2005, 01:34 AM

Dam that thing is fucking nice...when do you expect to have some numbers for us bro?

thermal · 10-15-2005, 07:02 AM

I gotta fix the brakes. I need to rebleed the line. After that, I will schedule an appointment with my tuner........

Mischief · 10-15-2005, 09:33 AM

when'd you get the carbon fibre hood?

thermal · 10-15-2005, 11:50 AM

I've always had it. It's just that it looked really beat up. When my car got painted, the shop went ahead polished and redid the clear coat. It looks brand new.

GT40FIED · 10-20-2005, 02:49 AM

Quote:

Originally posted by thermal
havent even washed the car yet

Who's that dude in the suit next to your car?

thermal · 10-20-2005, 11:30 AM

That my neighbor. He drives a 00 Si that he takes autocrossing. He was just checking out the progress

ebpda9 · 10-20-2005, 12:53 PM

damn, that's a bitchin' hot car.

Quote:

Originally posted by GT40FIED
Who's that dude in the suit next to your car?

ohh damn, he likes dudes in suits now. you never cease to amaze me man.

GT40FIED · 10-20-2005, 04:04 PM

Quote:

Originally posted by hondaman-iac
ohh damn, he likes dudes in suits now. you never cease to amaze me man.

Fuck off Romanian.

The guy just looked out of place.

10-02-2005, 08:35 PM	#206
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	DAMN is all i can say! a thing of beauty! __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

10-02-2005, 09:23 PM	#207
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	when did you get new wheels for the civic? And why'd you ditch teh mr7's?? Also how's that B20 holdin up? I assume the scavange system is for the PCV system? Looking good man, time to call up honda tuning __________________

10-03-2005, 09:12 PM	#210
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 37 Posts: 1,765	can't beat boost... __________________

10-03-2005, 11:58 PM	#211
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	yep. This just always happens to me. Each time I get close to completing something, I get pulled off to go out to sea..... __________________ Project Teg Visit the Turbo Forum

10-04-2005, 11:41 PM	#214
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	i cant get enough of your car man... i love the manifold in there __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

10-08-2005, 08:22 PM	#217
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I'm back focker. I was in Richmond. Hit me up monday and let me see that new ride! __________________ Project Teg Visit the Turbo Forum

10-09-2005, 06:30 AM	#219
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Monday (10OCT) will be a big day. I'm gonna start the car. Keeping my fingers crossed I have a couple more items to get but not related to the turbo set-up. I'm eyeballing some titanium traction bar and EDM ITR black interior. I plan to get the roll cage done in March/April time frame. By then, I need to have all my interior conversion done. __________________ Project Teg Visit the Turbo Forum Last edited by thermal : 10-09-2005 at 06:40 AM.

10-09-2005, 04:15 PM	#221
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	around noon mang __________________ Project Teg Visit the Turbo Forum

10-14-2005, 11:47 PM	#232
BlackEJ Registered User Join Date: Feb 2004 Location: VA Bitches!!!! Posts: 39	Damn bro that bish is focking low as hell, but hey them Volks make up for it. Looking good bro. __________________ Joo will bow down to Teh mastah

10-15-2005, 01:34 AM	#233
dabouncerx24 Registered User Join Date: Jul 2004 Posts: 548	Dam that thing is fucking nice...when do you expect to have some numbers for us bro?

10-15-2005, 07:02 AM	#234
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I gotta fix the brakes. I need to rebleed the line. After that, I will schedule an appointment with my tuner........ __________________ Project Teg Visit the Turbo Forum

10-15-2005, 11:50 AM	#236
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I've always had it. It's just that it looked really beat up. When my car got painted, the shop went ahead polished and redid the clear coat. It looks brand new. __________________ Project Teg Visit the Turbo Forum

10-20-2005, 11:30 AM	#238
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	That my neighbor. He drives a 00 Si that he takes autocrossing. He was just checking out the progress __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode