.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Hybrid
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 10-19-2005, 08:50 PM   #1
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
hybrid project commences.......

so you all know, im planning on H23vtec my lude. well i got my head. i bought a complete H22a4 head. for the better air flow.






now for my fellow luders on the site. what parts would you use in your head build?
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 10-19-2005, 10:10 PM   #2
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
I dont know much about H-series, but I recommend dual valve springs and titanium retainers. I would go ahead port match and port the intake then port match and port and polish the exhaust.
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Old 10-19-2005, 10:15 PM   #3
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
i'd get some crower stage 2 cams and whatever else you'd need to run them safely.
AzCivic is offline   Reply With Quote
Old 10-25-2005, 05:52 PM   #4
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
well i sold the head and am shipping it back to VA. oh well. i plan to buy the complete swap from Hmotors.

that way ill get everything i need. i figured it was cheaper and easier to swap the block instead of the head. with the money ill be making at Bud. ill get my car paid off and the swap by spring time.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 01-11-2006, 09:03 PM   #5
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
<OK BACK FROM THE DEAD>

I GOT MY BLOCK!!







Darton Sleeved H23a1 block. machined a H22a4 (55mm mains) crank for safer high rpms. It's a bare block, except for the water pipe, oil cooler, & oil squirters. I also have the crank & a H22a4 girdle. 89mm bore.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 01-12-2006, 07:29 AM   #6
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
Nice! What head are you gonna use now? Do you have all the misc parts to complete the bottom end?
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Old 01-12-2006, 04:47 PM   #7
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
i can use the oem misc parts off my old h23. the internals i havent decided on what to get it. oil pan is in the mail.
anything else i need to think about getting?

EDIT. im going to buy a pnp h22a4 head from a local shop.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 01-12-2006, 05:23 PM   #8
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
if you're really going to boost i'd save money and not pnp the head. hell I woudn't even put a vtec head on.
AzCivic is offline   Reply With Quote
Old 01-12-2006, 06:06 PM   #9
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
then whats the point in my build???

i want more tq than the h22 or h23 can make. put them together you get more tq less hp then h22a,1,4 but more then h23. the average specs on the build using stock parts: 175hp 169tq. thats the point in a h23vtec build.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.

Last edited by IALuder : 01-12-2006 at 06:40 PM.
IALuder is offline   Reply With Quote
Old 01-12-2006, 07:56 PM   #10
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
i'm not really sure, I don't think you know what you want to do.

who cares how much power someone made w/ their h23vtec build. you'll make way WAY more than that with a strong block, stock h23 head and lots of boost.
AzCivic is offline   Reply With Quote
Old 01-12-2006, 09:47 PM   #11
sicones
Registered User
 
sicones's Avatar
 
Join Date: Apr 2003
Location: the MVP garage, New York City
Posts: 516
is this going to be an all motor or boosted block, if your not boosting, nitrous or using high compression pistons how are you going to make any real power to put those darton sleeves to use???
sicones is offline   Reply With Quote
Old 01-12-2006, 10:33 PM   #12
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
im boosting. i got an oil pan from a friend that parted out a boost h23. so i got the plugs done already.

az you dont see my point. i want the power of a h23vtec tha t i cant get from a h22a.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 01-13-2006, 12:25 AM   #13
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
I do see your point, it just doesn't make sense to me.

you don't need a vtec head to make gobs of power with boost. by going to a vtec head you're just making the whole process more complicated and more prone to problems.

if you want to boost, get good rods/pistons (since you already have a sleeved block), slap on the stock head(maybe ss valves to deal w/ extra heat) and put on the turbo kit, tune it and easily make more power than you need.

out of curiousity is your car automatic?
AzCivic is offline   Reply With Quote
Old 01-13-2006, 06:16 PM   #14
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
well if they made good aftermarket parts for a h23 head maybe id think twice. but sence nobody like the h23 they make jack for it.

plus the head swap doesnt make it more prone to problems. after all im just making the H23a. which is a h23 with a vtec head. they put it in euro R accords.

its not as complicated as it sounds.

my car is CURRENTLY an auto. i talked to hmotors about a complete swap with out the motor. they said they can meet my demand and lower price. so, after i get the motor build and put together. ill buy that and start work on the tranny. unless i decide agianst the H tranny and bolt up a B series or D series tranny to it.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 01-13-2006, 06:56 PM   #15
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 43
Posts: 3,804
what aftermarket parts are you looking for? off the top of my head I know crower makes cams for the h23.

it might not have any problems at all, but putting on a stock head is going to be simpler and probably cheaper.

its your money and time, i'm just trying to give a suggestion on how to make the most of it. good luck.
AzCivic is offline   Reply With Quote
Old 01-13-2006, 09:30 PM   #16
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 38
Posts: 7,908
i like your opinion, and constructive critizum. i have been planin this out for a will now. i have read all articals, threads, ect.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 06:35 AM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com