.:HSTuners::

robertzp · 09-02-2005, 01:04 PM

Hello,
I have a 92 honda accord ex wagon. My symptoms are as follows:
-occasionally, the car will not start and I see the d4 light blinking rapidly; if I wait for about 10 minutes, the car will start normally
-sometimes, the car will start but the d4 light steadily blinks slowly. In this case, I can drive the car but the car runs very sluggishly.

My mechanic retrieved the following codes: 1-2-7-8 corresponding the number of blinks.

I have since then replaced my old 28100-PX0-A21 with a rebuilt 28100-PX0-A22 tcm which I paid $200 for. I did this because I noticed that some capacitors were starting to leak. According to my local Honda dealer, this model A22 supersedes the A21 model. I thought this solved my problem but last night the same thing happened again!

Obviously there is something else wrong. Any help will be appreciated.

sicones · 09-02-2005, 02:09 PM

maybe that is the wrong tcm, did you check the electrical connectons on the tranny, grounds etc..

what are those codes for anyway??

ebpda9 · 09-02-2005, 02:54 PM

the codes are for the shift and lockup solenoids. i had problems with the shift one too and i canged it. no problems since.

robertzp · 09-02-2005, 03:42 PM

Is it expensive to replace these shift and lockup solenoids?

If not, is it advisable just to change them all of them?

ebpda9 · 09-02-2005, 11:28 PM

they ran me like 180 a pair. you will need 2 pairs of them

09-02-2005, 01:04 PM	#1
robertzp Parked Join Date: Sep 2005 Posts: 2	d4 intermittent blinking Hello, I have a 92 honda accord ex wagon. My symptoms are as follows: -occasionally, the car will not start and I see the d4 light blinking rapidly; if I wait for about 10 minutes, the car will start normally -sometimes, the car will start but the d4 light steadily blinks slowly. In this case, I can drive the car but the car runs very sluggishly. My mechanic retrieved the following codes: 1-2-7-8 corresponding the number of blinks. I have since then replaced my old 28100-PX0-A21 with a rebuilt 28100-PX0-A22 tcm which I paid $200 for. I did this because I noticed that some capacitors were starting to leak. According to my local Honda dealer, this model A22 supersedes the A21 model. I thought this solved my problem but last night the same thing happened again! Obviously there is something else wrong. Any help will be appreciated.

09-02-2005, 02:54 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	the codes are for the shift and lockup solenoids. i had problems with the shift one too and i canged it. no problems since. __________________

09-02-2005, 11:28 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	they ran me like 180 a pair. you will need 2 pairs of them __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-02-2005, 02:09 PM	#2
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	maybe that is the wrong tcm, did you check the electrical connectons on the tranny, grounds etc.. what are those codes for anyway??

09-02-2005, 03:42 PM	#4
robertzp Parked Join Date: Sep 2005 Posts: 2	Is it expensive to replace these shift and lockup solenoids? If not, is it advisable just to change them all of them?