.:HSTuners::

10-27-2001, 11:02 PM

Well I am asking this for my friend he has a 96 Integra GSR with 2.5 inch springs and today he just got some 17's with 205/40 size tires on it. On the back wheelwells he has pretty much no space and if he hits a hard bump he is going to have some tire fender contact. I was wondering what the best way to fix this and is rolling the fenders an option.
Thanks

10-28-2001, 05:18 PM

Well for about 4 dollars you can Buy spring spaces.. They are little blocks designed to go in between the springs.. It spaces the springs out while its compressed and therefore giving more ride height.. Thats what i used..

Accord Man · 10-28-2001, 08:44 PM

Quote:

Originally posted by VN-Tec
Well for about 4 dollars you can Buy spring spaces.. They are little blocks designed to go in between the springs.. It spaces the springs out while its compressed and therefore giving more ride height.. Thats what i used..

I agree! Just use the spacers.

I dont think its worth to roll the fenders..

11-12-2001, 02:09 AM

i rolled the inside of my fenders in my old car...and i had the exact same setting as your buddy....that was no sweat...

11-12-2001, 10:26 AM

205/40/17 with Eibach Sportline and Koni Yellows, no spacers and no rubbing at all

11-28-2001, 06:05 PM

guess it'll make a difference what the offset on the rim is...

i've got H&R Race springs on mine....had to shave the rear fenders slightly...didn't have to roll them.

10-27-2001, 11:02 PM	#1
Eric97GS Posts: n/a	Rolling Fenders on an Integra Well I am asking this for my friend he has a 96 Integra GSR with 2.5 inch springs and today he just got some 17's with 205/40 size tires on it. On the back wheelwells he has pretty much no space and if he hits a hard bump he is going to have some tire fender contact. I was wondering what the best way to fix this and is rolling the fenders an option. Thanks

11-12-2001, 10:26 AM	#5
xplosive C1 Posts: n/a	rub 205/40/17 with Eibach Sportline and Koni Yellows, no spacers and no rubbing at all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-28-2001, 05:18 PM	#2
VN-Tec Posts: n/a	Well for about 4 dollars you can Buy spring spaces.. They are little blocks designed to go in between the springs.. It spaces the springs out while its compressed and therefore giving more ride height.. Thats what i used..

11-12-2001, 02:09 AM	#4
turbo LS Posts: n/a	i rolled the inside of my fenders in my old car...and i had the exact same setting as your buddy....that was no sweat...

11-28-2001, 06:05 PM	#6
qwikenuf Posts: n/a	guess it'll make a difference what the offset on the rim is... i've got H&R Race springs on mine....had to shave the rear fenders slightly...didn't have to roll them.