.:HSTuners::::Hondas Wanted:: |
04-14-2002, 08:54 PM
|
#1 |
|
Posts: n/a
|
removing the center console
ok i wanted to remove the center console (if I didnt get the terminology rite. it is the section where the arm rest is) to change my carpet...I unscrew the four screws...but somehow I cant seem to yank the thing off...I dont want to pull it out any harder because I am afraid I might break it. It's there any other screw from it that i'm missing?
|
|
|
04-14-2002, 09:02 PM
|
#2 |
|
Insomniac Moderator
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
|
I don't know about your civic, but in my Accord, there is a little "door" in the part that opens up with 2 screws in it.
__________________
1994 Accord EX coupe --Need hosting for your pics on HST? PM me...-- |
|
|
|
04-15-2002, 05:26 PM
|
#3 |
|
Posts: n/a
|
I had no problem. Took off the screws and lifed it over the parking break.
|
|
|
|
04-15-2002, 05:26 PM
|
#4 |
|
Posts: n/a
|
BY THE WAY: Where did you order your carpet from?
|
|
|
|
04-15-2002, 06:37 PM
|
#5 |
|
Posts: n/a
|
oh i just went to Home Depot and bought the carpet and I jz gonna tape my old carpet over the new one and started cutting to the pattern of the old carpet
|
|
|
|
04-15-2002, 06:58 PM
|
#6 |
|
Posts: n/a
|
Hmm, thats pretty cool. How did you get the idea?
|
|
|
|
04-15-2002, 08:16 PM
|
#7 |
|
Registered User
Join Date: Nov 2001
Location: Oviedo, FL
Age: 42
Posts: 3,195
|
i did that same thing, got the carpet from autozone, looks so much better than my old faded carpet. didnt have to do much cutting either.
|
|
|
|
|
04-15-2002, 11:10 PM
|
#8 |
|
Posts: n/a
|
oh i got the idea when i started grilling my car....I trace the bumper and place over the grill and cut it out...fix perfectly to the bumper (stock)...so I try the same way with the carpet w/o the tracing...
|
|
|
|
04-16-2002, 09:38 AM
|
#9 |
|
Posts: n/a
|
i am not 100 % sure
but i think there are only two screws that under the cover that under the e brake the one u took off... maybe the middle part is covering it, that's why it's hard to take it out.... or maybe the astray, u can figure this out, just don't use TOO MUCH force.. it will break :P good luck |
|
|
|
04-16-2002, 11:17 AM
|
#10 |
|
Posts: n/a
|
Dude! I am going to do that with my car. So I can go down to any AutoZone or HomeDepot and get the color I want? How hard is it to reinstall the new carpet? Any tips would help. Thanks.
|
|
|
|
04-16-2002, 04:18 PM
|
#11 |
|
Registered User
Join Date: Nov 2001
Location: Oviedo, FL
Age: 42
Posts: 3,195
|
its easy if you are patient and good at cutting things.
|
|
|
|
|
04-16-2002, 08:59 PM
|
#12 |
|
Posts: n/a
|
Ok, I am going to head down to home depot tomorrow and check it out. Where should I go? Home Depots are HUGE. I get lost.
 How much do you recommend I get (length, etc). ALSO, is there like a certain type of carpet I should get? Thanks! |
|
|
|
04-17-2002, 12:21 AM
|
#13 |
|
Posts: n/a
|
ever get it out?
|
|
|
|
04-17-2002, 12:34 AM
|
#14 |
|
Posts: n/a
|
damnnnnnnnnnnnnnnnnnn.......i'm still kinda mad heheheh ...today after i got home from school i tried to remove the darn thing again but just can seem to get it off or cant seem to find any door for other screwwww....gosh anyone from San Jose to help out???? heheheh....oh Honda...i recommend you measure your car length and width first b4 going to buy it....and remembered to buy it about 1-1.5 ft longer than your measurement...and yea just get any kind you one it's up to you...that's wat I got (the blue color)...good luck to ya...and good luck to me too as I will try again tomorrow....damnnnnn carrrr....everyone else was able to get it off so easy except me
 wish me luck |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
