.:HSTuners::

thermal · 10-30-2001, 07:59 PM

if you are interested on this $20 project, click the link below:

picture: http://www.turbocivic.net/photos/arnel1.jpg

instruction: http://www.hondastyle.com/forums/sho...s=&threadid=83

*Addict* · 10-30-2001, 09:57 PM

That looks good! I've seen some custom grills come out all bent & nasty lookin'. Nice job.

ps - i posted a new howto in the step by step forum....

10-31-2001, 06:37 PM

looks nice, better than mine

Accord Man · 10-31-2001, 06:42 PM

lookin good!

mine is pretty much the same.

thermal · 10-31-2001, 07:47 PM

thanks ya' all

94_AcCoRd_EX · 10-31-2001, 07:57 PM

Looks nice and clean

Racing Rice · 11-01-2001, 07:13 AM

I may have to do something like that one of these days..

Thermal, It hides your IC very well.. Makes a great sleeper..

thermal · 11-01-2001, 11:44 AM

Quote:

Originally posted by Racing Rice
I may have to do something like that one of these days..

Thermal, It hides your IC very well.. Makes a great sleeper..

i know, the problem is that i ran over a whole tire on the highway while going 60mph. the incident broke my bumper and ripped off the front bottom grill. it also warped my FMIC....:

:

:(.

Racing Rice · 11-01-2001, 12:32 PM

Quote:

Originally posted by thermalfi'd16

i know, the problem is that i ran over a whole tire on the highway while going 60mph. the incident broke my bumper and ripped off the front bottom grill. it also warped my FMIC....:: :(.

Man that sucks big time... would insurance not pay for it?

thermal · 11-01-2001, 01:03 PM

Quote:

Originally posted by Racing Rice

Man that sucks big time... would insurance not pay for it?

they would have, but my deductable was $700....so i didnt report it....

Accord Man · 11-01-2001, 01:05 PM

whoa sucks big time..

just use the opportunity to put a new bumper.. If you ever wanted one..

Racing Rice · 11-01-2001, 01:16 PM

Quote:

Originally posted by thermalfi'd16

they would have, but my deductable was $700....so i didnt report it....

yeah... $700 you could almost fix it yourself.. not really worth it..

Accord Man · 11-01-2001, 03:07 PM

Then when you add up the premiums...

not worth.

:

:

11-01-2001, 09:38 PM

Didnt u have a EG CIvic?

11-09-2001, 11:45 PM

dude, i attempted this in the beggining of the summer, an it turned out greaat, but the grille i used was mere chicken wire fencing. i really like urs an also like the kind u see on most body kits (the dimond ish), but i cant figure out where to buy it. home depo told me like they may be able to special order it, but thats a pain in my ass! anyy suggestions.

thermal · 11-13-2001, 11:43 AM

Quote:

Originally posted by VicPreist
dude, i attempted this in the beggining of the summer, an it turned out greaat, but the grille i used was mere chicken wire fencing. i really like urs an also like the kind u see on most body kits (the dimond ish), but i cant figure out where to buy it. home depo told me like they may be able to special order it, but thats a pain in my ass! anyy suggestions.

go to sears hardware. they have those patio door grills. it should be around the door and window section. mine is a 3/8's mesh. it comes with an aluminum frame that can be easily removed. it cost around $15. it's the same exact thing that wings west sells for $20 a foot......

11-13-2001, 12:32 PM

hells yeah, thanks a bunch

*Whtehnda93DXSdn* · 11-19-2001, 01:23 AM

Very ncie looking grill and work. Thanks for sharing and the link on the instructions....

Keep up the nice work.

Love the mirrors..:

:

thermal · 11-21-2001, 02:38 PM

thanks guys/gals.......

11-22-2001, 05:20 PM

okay what i wanna know is....i know how to do the bottom half of the grille but if someone could post up some pics on how to do the top part it would be cool.....i just cant figure out how to do it....

11-23-2001, 08:53 AM

Quote:

Originally posted by VicPreist
dude, i attempted this in the beggining of the summer, an it turned out greaat, but the grille i used was mere chicken wire fencing. i really like urs an also like the kind u see on most body kits (the dimond ish), but i cant figure out where to buy it. home depo told me like they may be able to special order it, but thats a pain in my ass! anyy suggestions.

try lowes, or a local hardware store. the stuff i got was called gutter gaurd i think, be careful when you cut the shiit cause it cut my hands to hell when i was making it

*KwikR6* · 11-23-2001, 02:08 PM

DOesn't APC just make a grille insert. or somthing that goes in behind the bumper.????? Looks just like that?

11-23-2001, 03:29 PM

nahh man, that apc shit is crap, and its expensive as hell. i tihnk the upper grille costs liek 70 bucks an the lower is liek 120. its much much cheaper to do it urself, and it will look a lot more custom.

thermal · 11-24-2001, 07:37 AM

Quote:

Originally posted by DJZVTEC02
okay what i wanna know is....i know how to do the bottom half of the grille but if someone could post up some pics on how to do the top part it would be cool.....i just cant figure out how to do it....

i do not have any pictures during the process. just read the link and visualize it.......it's really easy and it will make more sense once u take apart the top section....

11-24-2001, 09:00 AM

i know so do you actually cut the top molding out our just fit grill over it??? give me some more detailed intructions....thanks

thermal · 11-24-2001, 09:03 AM

Quote:

Originally posted by DJZVTEC02
i know so do you actually cut the top molding out our just fit grill over it??? give me some more detailed intructions....thanks

yeah man. i had to cut the inside of the top section where the H emblem was. once i get my PC hooked up, i'll post a drawing on what i did......this is not my PC....

11-24-2001, 01:11 PM

cool ok thanks

10-30-2001, 07:59 PM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	picture of my custom grill if you are interested on this $20 project, click the link below: picture: http://www.turbocivic.net/photos/arnel1.jpg instruction: http://www.hondastyle.com/forums/sho...s=&threadid=83 __________________ Project Teg Visit the Turbo Forum

10-31-2001, 06:42 PM	#4
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	lookin good! mine is pretty much the same. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

10-31-2001, 07:47 PM	#5
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	thanks ya' all __________________ Project Teg Visit the Turbo Forum

10-31-2001, 07:57 PM	#6
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Looks nice and clean __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

11-01-2001, 07:13 AM	#7
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	I may have to do something like that one of these days.. Thermal, It hides your IC very well.. Makes a great sleeper.. __________________ Racing Rice

10-31-2001, 06:37 PM	#3
90civiclxryder Posts: n/a	looks nice, better than mine

11-01-2001, 01:05 PM	#11
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	whoa sucks big time.. just use the opportunity to put a new bumper.. If you ever wanted one.. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

11-01-2001, 03:07 PM	#13
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	Then when you add up the premiums... not worth. :: __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

11-01-2001, 09:38 PM	#14
VN-Tec Posts: n/a	Didnt u have a EG CIvic?

11-09-2001, 11:45 PM	#15
VicPreist Posts: n/a	dude, i attempted this in the beggining of the summer, an it turned out greaat, but the grille i used was mere chicken wire fencing. i really like urs an also like the kind u see on most body kits (the dimond ish), but i cant figure out where to buy it. home depo told me like they may be able to special order it, but thats a pain in my ass! anyy suggestions.

11-13-2001, 12:32 PM	#17
VicPreist Posts: n/a	hells yeah, thanks a bunch

11-19-2001, 01:23 AM	#18
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	Very ncie looking grill and work. Thanks for sharing and the link on the instructions.... Keep up the nice work. Love the mirrors..:: __________________ Another good forum site: Tuners Alliance

11-21-2001, 02:38 PM	#19
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	thanks guys/gals....... __________________ Project Teg Visit the Turbo Forum

11-22-2001, 05:20 PM	#20
DJZVTEC02 Posts: n/a	okay what i wanna know is....i know how to do the bottom half of the grille but if someone could post up some pics on how to do the top part it would be cool.....i just cant figure out how to do it....

11-23-2001, 02:08 PM	#22
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	DOesn't APC just make a grille insert. or somthing that goes in behind the bumper.????? Looks just like that? __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

11-23-2001, 03:29 PM	#23
VicPreist Posts: n/a	nahh man, that apc shit is crap, and its expensive as hell. i tihnk the upper grille costs liek 70 bucks an the lower is liek 120. its much much cheaper to do it urself, and it will look a lot more custom.

11-24-2001, 09:00 AM	#25
DJZVTEC02 Posts: n/a	i know so do you actually cut the top molding out our just fit grill over it??? give me some more detailed intructions....thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode