.:HSTuners::

09-16-2003, 02:51 AM

will a h22a bolt into a 92-95 hatchback or does it need custom work to fit in?

Shaved &/or Laid · 09-18-2003, 05:09 PM

not worth it. WAY too much work. and you can undo it, you gotta cut transmission mounts.

09-21-2003, 09:38 AM

Well, it does take much work but the rewards are big in the end. I currently have this swap. Wiring is probably your greatest problem. Also new axles from driveshaftshop.com should be bought because of how the motor sits, it causes undue stress on the axles.

To the original poster, it fits with mount kits from Hasport and quite a few others. Very little cutting is required.

09-16-2003, 02:51 AM	#1
thekid Posts: n/a	h22a into a eg? will a h22a bolt into a 92-95 hatchback or does it need custom work to fit in?

09-18-2003, 05:09 PM	#2
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 37 Posts: 853	not worth it. WAY too much work. and you can undo it, you gotta cut transmission mounts. __________________ Doody Ej1 Yse.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2003, 09:38 AM	#3
Pikachu Posts: n/a	Well, it does take much work but the rewards are big in the end. I currently have this swap. Wiring is probably your greatest problem. Also new axles from driveshaftshop.com should be bought because of how the motor sits, it causes undue stress on the axles. To the original poster, it fits with mount kits from Hasport and quite a few others. Very little cutting is required.