.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Hybrid
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 04-03-2006, 06:09 PM   #1
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
H23Vtec commences

so i finally got the money and drop off my h23 spare block. its getting bored to 89mm and cleaned. then having Oil squirts installed for safer high rpm driving.

i also got another small 2K loan and bought the following:

ACL Bearings
MAhley Turbo Tough Rods
Wiesco Pistons
Cometic Headgasket .41
ann all new OEM parts to complete block: Oil pump, timing belt, water pump and piping ect...

i get the block back in 2 weeks. cant wait at all.

now to find a decent head.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 04-10-2006, 02:54 AM   #2
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
good news. i get my block back in 2 weeks from the shop.

i also just order ARP studs.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 04-10-2006, 08:46 AM   #3
pdiggitydogg
Yahoo Watashi wa kattaze!
 
pdiggitydogg's Avatar
 
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 39
Posts: 10,579
lookin awesome man, glad to hear its moving along!
pdiggitydogg is offline   Reply With Quote
Old 06-13-2006, 07:29 PM   #4
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
well pics are coming of the assembly and parts.

i also pick uped a kaizenspeed balance shaft removal kit, arp bolt kit.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-27-2006, 11:33 PM   #5
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
its in full swing bitches:

the block has been bored to 89mm, clean, and milled the surface was rough.









the oil squirts which i have to custom install. the h23 block didnt come with these stock.



the wiseco pistons 89mm off the shelf pistons:



__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-27-2006, 11:36 PM   #6
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
the balance shaft removal kit, made by kaizen speed.


arp head bolts and the girdle freshly cleaned:



unorthadox racing underdrive pully



the manley turbo tough rods with arp bolts included:



__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-27-2006, 11:37 PM   #7
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
and finally the oil pan custom bunged for that GT35R that i havent bought yet:





i will began to work on this after i get my crank back from cleaning + balancing. i also need my ACL bearing which will be here friday.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-28-2006, 07:22 AM   #8
thermal
Banning Machine
 
thermal's Avatar
 
Join Date: Aug 2001
Location: My Garage, Va.
Posts: 5,547
good shit
__________________


Project Teg

Visit the Turbo Forum
thermal is offline   Reply With Quote
Old 06-28-2006, 10:39 AM   #9
ChrisCantSkate
Thought Police
 
ChrisCantSkate's Avatar
 
Join Date: Aug 2001
Location: orlando florida
Age: 38
Posts: 9,662
looking good man. im glad your doing it right, ive seen too many people try and slap the h22 head on the h23 block with no other work... dosnt work well. im glad to see some h-loving still out there
__________________
Black Vtec Prelude-h22a power'd



Many dreams come true, and some have silver linings.
I live for my dreams and a pocket full of gold.
ChrisCantSkate is offline   Reply With Quote
Old 06-28-2006, 05:35 PM   #10
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
yea, i love the H hybrid. im think all crower head work. stage 2 camshafts, cams, vavles, retainers
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-29-2006, 10:10 PM   #11
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
people are telling me to paint the block...but whats the point in doing that?
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-02-2006, 01:30 PM   #12
pdiggitydogg
Yahoo Watashi wa kattaze!
 
pdiggitydogg's Avatar
 
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 39
Posts: 10,579
i could see a ceramic paint retaining a little heat (?)
pdiggitydogg is offline   Reply With Quote
Old 07-02-2006, 03:44 PM   #13
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
if thats all it will do, screw that. look at the BLING
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-18-2006, 11:14 PM   #14
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
just purchased:

Gude Bored and port matched throttle body/IM chamber 67mm to 63mm instead of 60mm to 56mm. This will bolt right in on an H23 or it will require mounting a map sensor on the firewall if you want to use this with an H22 (like I did). I can include one for a little extra. Also includes brand new OEM TB gasket. I don't know if this will work with a 5th gen because a local guy tried to use it and he had a hunting idle and a CEL for the Intake Air Temp sensor (which is on the runners, not the IM chamber). I never got to look at it before he put his old one back on. $150shipped


i plan to port it out to euro R size.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-22-2006, 11:10 PM   #15
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
well time to take out the old.

it threw a couple of rods. so i had to buy the civic to get the lude running. but i might keep the civic for shits n giggles.

but here is the progress we made.






__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-23-2006, 01:54 AM   #16
AzCivic
Moderator
 
AzCivic's Avatar
 
Join Date: Feb 2002
Location: Az
Age: 41
Posts: 3,804
man you must have alot of money to blow. good luck.
AzCivic is offline   Reply With Quote
Old 07-23-2006, 11:00 AM   #17
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
actually this lude isnt going to see much work for the next couple of months.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-30-2006, 05:57 PM   #18
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
up DATE!










check out the chunk of the motor missing


__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 08-13-2006, 03:48 PM   #19
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
well now i have run into some small snags. the car will be worked on over winter while i save up a huge budge and pay off the DD.

but we did manage to get half of the interior work done with my small pocket change!!!

before:


dry ice time. to get the sound deading shit out. it work amazing. 7 1/2 pounds of dry ice to remove 15lbs of tar...


primer:


paint:

__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.

Last edited by IALuder : 08-15-2006 at 01:52 AM.
IALuder is offline   Reply With Quote
Old 08-14-2006, 06:57 AM   #20
AkimboStylee
Registered User
 
AkimboStylee's Avatar
 
Join Date: Aug 2002
Location: The Bay which holds no water, Palm Bay, Fl
Age: 37
Posts: 1,688
Looking good
__________________
A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous
AkimboStylee is offline   Reply With Quote
Old 08-15-2006, 01:53 AM   #21
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
thanks, it was all done with rattle can. the paint and primer only coest me 24.67. hahahahah.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 11-27-2006, 03:16 PM   #22
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
even tho i know only two people will look at this and only one will reply i figured ill let those of whom care know more about my progress.

little bit of an update for those interested. i got my h22a head back from blacktrax in cali. it is used so its not all shinny and shit. plus my str cams.

pictures:






my collection of shit:



__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 12-01-2006, 11:11 AM   #23
AkimboStylee
Registered User
 
AkimboStylee's Avatar
 
Join Date: Aug 2002
Location: The Bay which holds no water, Palm Bay, Fl
Age: 37
Posts: 1,688
thing is going to be a beast!!!!
__________________
A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous
AkimboStylee is offline   Reply With Quote
Old 01-12-2007, 02:37 PM   #24
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
well i just got my Hondata IM gasket, Skunk2 manifold, BDL fuel rail, RC 1600 CC injectors.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 03-17-2007, 03:06 PM   #25
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
got some more goodies!







__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 04-10-2007, 10:38 PM   #26
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
i got a F22a4 tranny today. ill pictures up later
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 06-27-2007, 09:05 AM   #27
Racing Rice
Project Combat Honda
 
Racing Rice's Avatar
 
Join Date: Sep 2001
Location: Highland,OH
Age: 43
Posts: 7,985
Wow man, nice project! I can't wait to see this thing when you get done. It sounds like it's coming along nicely.
__________________
Racing Rice
Racing Rice is offline   Reply With Quote
Old 06-29-2007, 01:04 AM   #28
IALuder
Registered User
 
IALuder's Avatar
 
Join Date: Sep 2003
Location: Des Moines IA
Age: 36
Posts: 7,908
sometime i wish it was done. im tired of building it already.
__________________
93 Si H23vtec......soon to be 12lbs
95 Civic EX....automatic DD

if you cant dazzle them with your brillance, baffle them with your bullshit.
IALuder is offline   Reply With Quote
Old 07-12-2008, 10:08 AM   #29
2000Pimpinex
Super Moderator
 
2000Pimpinex's Avatar
 
Join Date: Sep 2001
Location: Kentucky
Age: 41
Posts: 1,427
Any updates? Is it done yet?
__________________
2008 Mustang GT
1998 Hatchback SOLD
1992 Hatchback w/ JDM H22A SOLD
1985 Ford Bronco XLT 5.8 351W
w/ 33X12.5X15
2000Pimpinex is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:50 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com