.:HSTuners::

bent_remy · 12-22-2002, 05:13 PM

Alright, the swap is done. B16a2. I need to make this engine fast. F*** turbo! F*** nitrous! F*** a supercharger! I'm going all motor. Where can I start increasing my horsepower. All I have done right now is DC 4-1 one piece sport headers. Aem cold air intake and a catback exaust. I would like to have around 225-250 hp when I'm done. Any suggestions on where to start?

TonitrusEN · 12-22-2002, 05:37 PM

Skunk 2 Stage 1 Cam
Skunk 2 Valvetrain
Skunk 2 Intake Manifold
Port and Polish
Titanium Valve Springs
Titanium Retainers
Chipped ECU
GSR Head
Hi-Flo Cat

Should put you at around 200hp at the flywheel

12-23-2002, 05:09 AM

first of all, you have a header. you have an inline 4, not a v4, so you don't have two headers. god that pisses me off. A SINGULAR OBJECT IS NOT PLURAL.

now-
stage 1 cams aren't worth the money. if you are only going a little more, get ctr/itr cam combo.
else get skunk2 stage2s or toda spec B's. spec B's alter not only the VTEC lobe, but also the non-vtec lobe, so the midrange is more noticable. skunks2 have a higher vtec profile, but near stock non-vtec lobe.
if you are looking for better gas mileage in a daily drive, go skunk2
if you are looking for a track car, go spec B's
with any cams, valvetrain is required 90% of the time.

gsr head will give a bump in compression, but at the same time the b16 head flows better than it. it really is useless to switch heads. i recommened ls/vtec guys to buy the head the find first. flow charts have shown that they are near identical. and besides, then you gotta deal with IAB's of the gsr (means running a p72 or p13 computer), and the fact that the gsr Intake manifold hbolt pattern is like no others... so forget about adding an ITR IM to it... it wont fit.

250 horse-- wheels? or at the fly? either way, you are talking at least 10 grand in upgrades. bottome end work- bored to 84mm, 12:1 compression, hondata tuned, portmatched head, and so on. NA is NOT cheap... and its even harder in the torqueless wonder known as the b16a.

12-22-2002, 05:13 PM	#1
bent_remy Registered User Join Date: Oct 2002 Location: Bronx, New York Age: 43 Posts: 182	Geting down to business....... Alright, the swap is done. B16a2. I need to make this engine fast. F* turbo! F* nitrous! F*** a supercharger! I'm going all motor. Where can I start increasing my horsepower. All I have done right now is DC 4-1 one piece sport headers. Aem cold air intake and a catback exaust. I would like to have around 225-250 hp when I'm done. Any suggestions on where to start? __________________ Civic Dx 2 Si Ya heard!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-23-2002, 05:09 AM	#3
pissedoffsol Posts: n/a	first of all, you have a header. you have an inline 4, not a v4, so you don't have two headers. god that pisses me off. A SINGULAR OBJECT IS NOT PLURAL. now- stage 1 cams aren't worth the money. if you are only going a little more, get ctr/itr cam combo. else get skunk2 stage2s or toda spec B's. spec B's alter not only the VTEC lobe, but also the non-vtec lobe, so the midrange is more noticable. skunks2 have a higher vtec profile, but near stock non-vtec lobe. if you are looking for better gas mileage in a daily drive, go skunk2 if you are looking for a track car, go spec B's with any cams, valvetrain is required 90% of the time. gsr head will give a bump in compression, but at the same time the b16 head flows better than it. it really is useless to switch heads. i recommened ls/vtec guys to buy the head the find first. flow charts have shown that they are near identical. and besides, then you gotta deal with IAB's of the gsr (means running a p72 or p13 computer), and the fact that the gsr Intake manifold hbolt pattern is like no others... so forget about adding an ITR IM to it... it wont fit. 250 horse-- wheels? or at the fly? either way, you are talking at least 10 grand in upgrades. bottome end work- bored to 84mm, 12:1 compression, hondata tuned, portmatched head, and so on. NA is NOT cheap... and its even harder in the torqueless wonder known as the b16a.