.:HSTuners::

02-16-2002, 01:25 PM

Is there anyone out there that can tell me where to find instructions on installing my coilovers. I have looked all over this site and many others but I cant seem to find anything. A step by step would be cool thanks for any help

slowEJ6 · 02-16-2002, 08:35 PM

hit me up on AIM, ill tell you exactly what to do step by step as you are doing it if you want. i have time.

02-17-2002, 03:37 PM

Hey -Hybrid3do0rcx-

Thanks I would really appreciate that. I am planning on starting tommorow (Monday) at around 9 am (Pacific Time). So any spare time you gots I could use some of it up for ya.

I know the basics, but not everything.

Oh ya I have a friend that told me that I probably would not need a spring compressor because I am putting on coilovers is that true???

any ways I dont have AIM so give me a time that you can come on and we can talk

Later

02-17-2002, 05:30 PM

you will need a spring compressor to remove your stock springs from the assembly.

you don't need a spring compressor when you install your coilovers though.

good luck,

aj

slowEJ6 · 02-17-2002, 08:25 PM

hmm just PM me a time you'll be on, im in FL so....ill more than likely be up at 10am EST.

Sivik · 02-19-2002, 12:26 AM

Quote:

Originally posted by ajn
you will need a spring compressor to remove your stock springs from the assembly.

you don't need a spring compressor when you install your coilovers though.

good luck,

aj

i've installed a springs before, and I didn't have to use a spring compressor. I had the car (rear or front) sit on jack stands and then use a jack to hold the control arms up as i unbolted everything, then slowly lower the jack and viola! i've done it on mustangs, but I don't think its much different with another car... maybe I'm wrong...

02-19-2002, 04:26 PM

Quote:

Originally posted by Sivik

i've installed a springs before, and I didn't have to use a spring compressor. I had the car (rear or front) sit on jack stands and then use a jack to hold the control arms up as i unbolted everything, then slowly lower the jack and viola! i've done it on mustangs, but I don't think its much different with another car... maybe I'm wrong...

Hmmm.....I don't see how that could be done on a honda.

maybe you're right though.

later,

aj

02-16-2002, 01:25 PM	#1
Quist Posts: n/a	coilover install Is there anyone out there that can tell me where to find instructions on installing my coilovers. I have looked all over this site and many others but I cant seem to find anything. A step by step would be cool thanks for any help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-16-2002, 08:35 PM	#2
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	hit me up on AIM, ill tell you exactly what to do step by step as you are doing it if you want. i have time.

02-17-2002, 03:37 PM	#3
Quist Posts: n/a	Hey -Hybrid3do0rcx- Thanks I would really appreciate that. I am planning on starting tommorow (Monday) at around 9 am (Pacific Time). So any spare time you gots I could use some of it up for ya. I know the basics, but not everything. Oh ya I have a friend that told me that I probably would not need a spring compressor because I am putting on coilovers is that true??? any ways I dont have AIM so give me a time that you can come on and we can talk Later

02-17-2002, 05:30 PM	#4
ajn Posts: n/a	you will need a spring compressor to remove your stock springs from the assembly. you don't need a spring compressor when you install your coilovers though. good luck, aj

02-17-2002, 08:25 PM	#5
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	hmm just PM me a time you'll be on, im in FL so....ill more than likely be up at 10am EST.